Rapid and controlled deswelling of porous poly(N‐isopropylacrylamide) hydrogels prepared by the templating of interpenetrated nanoporous silica particles

Free radical polymerization of N‐isopropylacrylamide (NIPAAm) and crosslinker solutions, which were fulfilled in silica particles with an interpenetrated and nanometer‐sized porous structure (a diameter of 3 mm and mean pore sizes of 15, 30, and 50 nm), fabricated hybrids of organic hydrogels and inorganic silica. Differential scanning calorimetric analyses of the hybrids revealed that silica components affected the thermoresponsive properties of polyNIPAAm hydrogels. Porous polyNIPAAm hydrogels were prepared by the subsequent acid treatment of the hybrids to remove silica. Transmission Fourier transformed infrared spectra indicated the selective extraction of silica. Scanning electron microscopic observation of the hydrogels confirmed the porous structure. The deswelling rate of porous hydrogels was 7 times larger than that of conventional hydrogels and increased with increasing the pore size of silica used. However, the swelling was not affected by the pore formation. The thermoresponsiveness of porous polyNIPAAm hydrogels could be regulated by the pore size. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3542–3547, 2002     

Synthesis and biodegradation of poly(ester amide)s containing amino acid residues: The effect of the stereoisomeric composition of L‐ and D‐phenylalanines on the enzymatic degradation of the polymers

Biodegradable poly(ester amide)s that contained phenylalanine residues in the main chains were synthesized by the polycondensation of di‐p‐nitrophenyl sebacate and phenylalanine 2‐aminoethyl ester. The stereoisomeric composition (L /D ratio) of the phenylalanine residue in the monomer did not affect the yield and molecular weight of the polymer much. From the optical rotations of the polymers, it was found that the L /D ratio of the phenylalanine residue in the polymer was almost equal to the L /D ratio of the phenylalanine residue in the monomer. The biodegradability of the poly(ester amide)s was studied in aqueous solutions with proteases as catalysts. The polymer with 100% L ‐phenylalanine residue was effectively degraded by α‐chymotrypsin or subtilisins. However, the replacement of 10% L ‐phenylalanine with D ‐isomer resulted in a dramatic decrease in degradability. The polymers with less than 30% L ‐isomer were hardly degraded by the enzymes. Gel permeation chromatography studies suggested that the solubility of the degradation products in water greatly affected the rate and extent of biodegradation. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 385–392, 2002     

Size and surface effects of prussian blue nanoparticles protected by organic polymers

Prussian blue (PB) nanoparticles protected by organic polymers such as poly(vinylpyrrolidone) (PVP) and poly(diallyldimethylammonium chloride) (PDDA) were prepared. Different experimental conditions (concentrations of Fe ions and feed ratios of Fe to the polymers) have been investigated to control the size of the PB nanoparticles. For example, the averaged dimensions of the PB nanoparticles were tuned from 12 to 27 nm by use of PVP in the different conditions. Addition of PDDA produced the PB nanoparticles with very small dimensions (5-8 nm) by an effective electrostatic interaction. We found that the surface environments of the PB nanoparticles affect the inherent properties of PB. The shifts of charge transfer (CT) absorptions from Fe(2+) to Fe(3+) in the PB nanoparticles resulted from the surface-protecting polymers. Especially, the PB nanoparticles with the PVP protection show high solubility in a variety of organic solvents and a solvent-dependent CT absorption. Measurement of the magnetic properties of the PB nanoparticles showed unprecedented size-dependency, surface effect, and superparamagnetic properties.     

Highly practical and general synthesis of monodisperse linear pi-conjugated oligoenynes and oligoenediynes with either trans- or cis-olefin configuration

Efficient and practical synthesis of a variety of 1-iodo-4-(trimethylsilyl)but-1-en-3-yne derivatives 1 and 2 with trans- and cis-olefin configuration was described. Their repeated use as building blocks allowed the facile synthesis of trans- and cis-oligoenynes, respectively. Development of a highly practical method for preparing monodisperse trans- and cis-oligoenediynes having the effective conjugation length was also accomplished by using 5 and 4, which can be readily prepared from 1 and 2, respectively.     

Metal-containing initiator systems. VI. Polymerization of butadiene with metal–organic halide systems

The polymerization of butadiene with binary initiator systems consisting of some activated metals and organic halides was investigated at 60°C. From the results obtained, it was found that systems of reduced nickel and methyltrichlorosilane or dimethyldichlorosilane were most effective for the polymerization, and those of reduced nickel and carbon tetrachloride, benzyl chloride, benzyl bromide and benzoyl chloride, showed moderate activity. The polybutadienes obtained with these systems were observed to contain product of more than 80% cis-1,4 microstructure. From detailed studies on the reduced nickel–methyltrichlorosilane system, these polymerization mechanisms were explained by the hypothesis that the initiation occurred through the reaction of the dissociated transition state complex with the monomer or with a trace amount of water, and then the propagation proceeded via a coordinated cationic mechanism. These systems did not show a good activity for the cis-1,4 polymerization of isoprene.     

Interplays ofμSR,susceptibility and neutron studies on dilute-alloy spin glasses

Static spin polarization of Fe moments in a spin glassAuFe, determined by zero-fieldSR, is compared to an ac-susceptibility measurement below the cusp temperatureT _g, and a rather uniform amplitude of the static polarization is pointed out for frozen spins. Completely random orientation of frozen spins is revealed by neutron scattering in a dilute 1%CuMn, and an importance of comparing results of these different methods is demonstrated.     

Positive muon spin depolarization in quenched aluminium dilute alloys

Aluminum dilute alloys (Al-0.047 at% Mg, Al-0.052 at% Cu and Al-0.051 at% Si) were quenched from 600 and 450C. The positive muon behavior in the quenched alloys has been studied. Three peaks (Peak I, II and III) are found. Peak I is due to the trapping and detrapping of positive muons at single impurity atoms. The muon spin depolarization rate at the trap in Peak I was found to be 0.36sec^–1. Peak II is connected to impurity clusters. Peak III is the trapping of muons at quenched-in vacancies. The depolarization rate at the trapping site was found to be 0.2sec^–1. The activation energy of the trapping rate was found to be 25 meV. As the quenched-in vacancies annealed out, the trapping rates decreased to near zero.     

A coordinatively unsaturated,polymer-bound palladium(0) complex. Synthesis and catalytic activities

A coordinatively unsaturated palladium(0) complex was prepared by the reduction of a polymer-bound palladium(II) chloride complex, which was prepared by the reaction of poly-4-diphenylphosphinomethylstyrene with palladium chloride, with hydrazine in ethanol in the presence of triphenylphosphine. Catalytic activities of the polymerbound palladium(0) complex were examined for three representative types of palladium(0)-induced reactions involving oxidative addition of halides to the metal: (i) vinylic hydrogen substitutions with aryl halides, (ii) acetylenic hydrogen substitutions with aryl halides, (iii) vinylic halogen substitutions with Grignard reagents. Use of the catalyst resulted in formation of corresponding products in good yields. The catalytic activity is comparable to that of analogous homogeneous catalysts, yet is not remarkably lowered on being recycled.     

A simulation study to evaluate the statistical noise and spatial resolution in image reconstruction of emission computed tomography--with respect to the optimization of the filter function in the convolution integral

Filtered backprojection method has been commonly used to reconstruct images in the field of the computed tomography (CT). However, in the emission CT such as positron and single photon CT, poor counting static which are caused by limited dosage to patients, limited counting rate capacity and limited efficiency of the imaging device, produce a statistical noise in the reconstructed image. The magnitude of the statistical noise and the spatial resolution were evaluated for various shapes of the filter used in the convolution integrals of the filtered back-projection procedure. The statistical noise was proportional to the inverse of the root of the total number of counts for any filters. The high-frequency-cut characteristic of the filter reduced the statistical noise, but increased the spatial resolution in the images. It was possible to optimize the shape of the filter for given total number of counts and required statistical noise and spatial resolution.     

Alternating copolymerizations of styrene and acrylic monomers initiated with carbanions in the presence of ZnCl2

On electrochemical initiation of alternating copolymerizations of styrene–acrylonitrile (AN) and styrene–diethyl fumarate (DEF) in the presence of ZnCl₂, radical anions of AN–ZnCl₂ and DEF–ZnCl₂ complexes produced at the cathode were assumed to initiate copolymerization. In analogy with the cathode-initiated copolymerization, the radical anions of AN–ZnCl₂ and DEF–ZnCl₂, generated with the carbanions such as sodium naphthalene, disodium α-methylstyrene tetramer dianion, and butyllithium, were also found to produce alternating copolymers of styrene–AN and styrene–DEF. On the contrary, no polymers were obtained from methyl methacrylate (MMA)–styrene and methacrylonitrile (MAN)–styrene in the presence of ZnCl₂ either with carbanions or by electrochemical reduction. Styrene–MAN–ZnCl₂ yielded an alternating copolymer with carbanions upon introduction of oxygen.