Aqueous Titanate Sols from Ti Alkoxide-α-Hydroxycarboxylic Acid System and Preparation of Titania Films from the Sols

Aqueous titanate sols were prepared by reactions of titanium tetraisopropoxide (TIP) with -hydroxycarboxylic acids in water. IR and Raman spectra, and elemental analyses of the precipitates obtained from the sols revealed that the carboxylates were chelated to titanium but the Ti species were polymerized to form a cluster that had a colloidal nature. Spin-coating of titania (TiO₂) thin films from these sols was also examined. Interestingly, it was found that (004) preferentially oriented anatase films with refractive index of 2.54 were obtained from TIP-lactic acid-NH₃ (1:1:1, molar ratio) aqueous sol. This crystallographic orientation was characteristic of the TIP-lactic acid-NH₃ (1:1:1) system, and was not affected by the kinds of substrates used and the heating rate of the film. TEM observation indicated that small anatase grains had already formed at 200°C. Therefore, the crystallographic orientation might depend strongly on the structure of the chemical species of the precursor solutions.     

Highly sensitive automatic analysis of polycyclic aromatic hydrocarbons in indoor and outdoor air

A method for the quantitation of polycyclic aromatic hydrocarbons (PAHs) in indoor and outdoor air by high-performance liquid chromatography (HPLC) with a spectrofluorometric detection and programmed excitation and emission wavelength pairs is proposed. The mobile phase is a linear gradient of methanol-water. The relative standard deviations (n = 5) are in the range 0.38-1.7% at concentration levels of 0.69-11.40 ng ml(-1). The determination limits (S N = 10 ) are 0.5-15.9 pg. The proposed method was successfully applied to quantitate 12 PAHs in gas phase and particulates in indoor and outdoor air. The recoveries of PAHs from gas phase and particulates were 95.7-117.5 and 94.8-112.4%, respectively. This highly sensitive automatic HPLC analysis for PAHs both in gas phase and particulates can be applied to indoor and outdoor survey.     

Ionic conductivity of superionic conducting glasses in the pseudobinary system AgIAg2MoO4

The ionic conductivity was measured in the temperature range 250–300 K as a function of composition of superionic conducting glasses in the pseudobinary system AgIAg₂MoO₄. The conductivity, ranging from 10^?2 to 10^?4 Ω^?1 cm^?1 at room temperature, increases linearly in logarithmic scale with increasing AgI content, while the total silver ion concentration remains nearly constant in the whole glass-forming region of the present system. Such a composition dependence of conductivity is considered to be evidence that only a fraction of the silver ions in glass contributes to the ionic conduction. The conductivity and the activation energy for conduction differ slightly between bulk glasses and pressed pellets of pulverized glasses. The close agreement in bulk glasses and pellets suggests that bulk rather than grain boundary or surface diffusion dominates the conduction process in the present glasses.     

Metallic Na formation in/on NaCl crystals with irradiation by electron or vacuum ultraviolet photons

Metallic Na was formed in/on NaCl single crystals by irradiating them with a variety of radiation sources, namely, 21 MeV electron pulses, an electron beam of 30 keV and photon fluxes in the VUV region. The physical states were analysed using several methods, optical absorption, lifetime measurement of positron annihilation, Auger electron spectroscopy and UV photoelectron spectroscopy. Metallic Na was obtained in different physical states; clusters were formed in bulk, thin layers (islands) and thick layers on the surface.     

(2,7-Disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) as bidentate organoaluminum Lewis acids: elucidation and synthetic Utility of the double electrophilic activation phenomenon

A series of (2,7-disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) (2) has been readily prepared in situ by treatment of the requisite 2,7-disubstituted-1,8-biphenylenediol (1) with Me3Al (2 equiv) in CH2Cl2 at room temperature; this primarily relies on the successful establishment of a new synthetic procedure of 1 starting from inexpensive m-anisidine. Evaluation of 2 as a bidentate organoaluminum Lewis acid has been performed by the reduction of ketonic substrates using Bu3SnH as a hydride source in comparison to the conventional monodentate Lewis acid dimethylaluminum 2,6-xylenoxide (11), uncovering the significantly high activation ability of 2 toward carbonyl. Particularly, (2,7-dimethyl-1,8-biphenylenedioxy)bis(dimethylaluminum) (2a) exerted the highest reactivity, which has also been emphasized in the Mukaiyama aldol reaction. The structure of the bidentate Lewis acid 2 was unambiguously determined by single-crystal X-ray diffraction analysis of 2g possessing a bulky 3,5-di-tert-butylphenyl substituent, revealing the rigid dimeric assembly in the solid state. The double electrophilic activation of carbonyl substrate by 2a has been supported by low-temperature 13C NMR analysis as well as theoretical study using the Gaussian 98 program. Moreover, unique stereoselectivity has been observed in the 2a-promoted Mukaiyama Michael addition, and highly chemoselective functionalization of carbonyl compounds in the presence of their acetal counterparts has been realized using 2a. Finally, the effectiveness of 2a for the activation of ether functionality has been demonstrated in the Claisen rearrangement of allyl vinyl ethers.     

Quantitative study of diffuse increased 99mTc-methylene diphosphonate accumulation of both kidneys

Patients with diffuse increased accumulation in both kidneys on 99mTc-MDP bone scintigram were evaluated quantitatively. Among 1,100 cases, 7 (0.63%) showed this finding. The accumulation density ratios of kidneys/lumbal vertebra in A/D exchanged images of these patients were compared with control group, so that these ratios of patient group were higher than control group statistically. In conclusion, the accumulation density ratio was made the index of diffuse increase accumulation in both kidneys on 99mTc-MDP bone scintigram.     

One-pot synthesis of sialo-containing glycosyl amino acids by use of an N-trichloroethoxycarbonyl-beta-thiophenyl sialoside

We describe an efficient synthesis of 2,6- and 2,3-sialyl T antigens linked to serine in a one-pot glycosylation. We first investigated the glycosidation of thiosialosides by varying the N-protecting group. Modification of the C-5 amino group of beta-thiosialosides into the N-9-fluorenylmethoxycarbonyl, N-2,2,2-trichloroethoxycarbonyl (N-Troc), and N-trichloroacetyl derivatives enhanced the reactivity of these compounds towards glycosidation. Addition of a minimum amount of 3 A molecular sieves was also effective in improving the yield of alpha-linked sialosides. Next, we conducted one-pot syntheses of the glycosyl amino acids by using the N-Troc sialyl donor. The N-Troc derivative can be converted into the N-acetyl derivative without racemization of the amino acids. Branched-type one-pot glycosylation, initiated by regioselective glycosylation of the 3,6-dihydroxy galactoside with the N-Troc-beta-thiophenyl sialoside, provided the protected 2,6-sialyl T antigen in good yield. Linear-type one-pot glycosylation, initiated by chemoselective glycosylation of galactosyl fluoride with the N-Troc-beta-thiophenyl sialoside, afforded the protected 2,3-sialyl T antigen in excellent yield. Both protected glycosyl amino acids were converted into the fully deprotected 2,6- and 2,3-sialyl T antigens linked to serine in good yields.     

SERS and FT-IR studies of CO adsorbed on underpotential deposited Ag/Pt electrodes

CO adsorbed on UPD and OPD (under- and overpotential deposited) Ag layers on a Pt electrode surface was studied by SERS and IRRAS in conjunction with cyclic voltammetry. Electrochemical activation of a uniform UPD Ag adlayer produced Ag clusters on the Pt electrode as well as bare Pt sites. The strong adsorption of CO on the UPD Ag/Pt electrode compared with a bulk Ag electrode is explained by the influence of the substrate Pt atoms. The degree of electron back-donation to CO increases the degree of lower frequency shifts of CO on the electrodes in the order Pt electrodes < monolayer Ag/Pt < multilayer Ag/Pt.     

Synthesis of polyphthalimidines with benzylidene group from aminophthalide monomers

Two aminophthalide monomers, 6-amino-3-benzylidenephthalide (I) and 3-(p-aminobenzylidene)phthalide (II), underwent self-polycondensation in o-phenylphenol at 250°C to yield polyphthalimidines with inherent viscosities up to 0.5 dL/g. These polymers were readily soluble in a variety of solvents such as dimethylformamide, dimethyl sulfoxide, m-cresol, pyridine, and methylene chloride. The temperatures at which a 10% weight loss occurred by thermogravimetry in nitrogen were 460°C for the polymer derived from I and 490°C for the polymer from II. The glass transition temperature of the polymer from I was 332°C, determined by thermomechanical analysis.     

The passivation phenomenon of platinum in fused lithium chloride + potassium chloride eutectic: Part II. Chlorine overpotential and superpassivation of platinum

Platinum is known to have a very high chlorine overpotential, about 0.8 V, in fused lithium chloride + potassium chloride eutectic. The high overpotential can be ascribed to the formation of the thick passivation film of platinum chlorides. The high chlorine overpotential was decreased by the addition of alkali metal oxides and a reversible chlorine evolution was revealed in a similar manner as the graphite electrode. The reversible chlorine evolution was ascribed to the formation of the oxide passivation film. The chlorine overpotential at the oxide film was increased stepwise as the applied potential was made more positive. The stepped transitions of the chlorine overpotential was ascribed to the valence change of the oxide film. Platinum shows a typical N-shaped passivation at +0.65 V versus Ag/AgCl(0.1) which has been ascribed to the dissolution of platinum into Pt(II) ions and following formation of the passivation film of supersaturated Pt(II) chloride. Platinum was found to show another passivation phenomenon at high temperatures, above 450°C. The N-shaped current-potential curve was observed at +1.8 V which was far more positive than the potential of the standard chlorine electrode. The dissolution of platinum prior to the passivation was found to occur due to the formation of high valence platinum ions such as Pt⁶⁺ and Pt⁸⁺.