Radiation-induced emission from golden hamster embryo cells

Emission from high-energy-electron-irradiated golden hamster embryo (GHE) cells has been studied over the temperature range 12–300 K both by a one-shot-single-photon-counting method and by photocurrent measurements with an oscilloscope. Emission from the irradiated phosphate buffered saline (PBS) also has been studied. The emission spectra from PBS at 12 and 77 K show a maximum around 330 and 380 nm, respectively, which are the same spectra as those from irradiated pure H₂O. The emission from irradiated GHE consists of the new band at 480 nm in addition to the emission from H₂O. The 480 nm emission is observed at the temperature range of 12–300 K, though the emission at 300 K is much lower than that at low temperature. The 480 nm emission is ascribed to the transition from excited organic substances in GHE cells. The intensity of 480 nm emission at 300 K increases linearly with increasing irradiation-dose in the range of 11–600 Gy.     

Characterization of an avidin-bonded column for direct injection in reversed-phase high-performance liquid chromatography

An automatic method for the determination of metabolites of Ropivacaine in urine was set up. It utilizes supported liquid membrane extraction for sample clean-up and enrichment, followed by ion-pair chromatography determination using UV detection. The extraction was very selective with no observed interfering compounds from the urine matrix, permitting simple isocratic chromatographic analysis. The detection limits for spiked urine samples were 2–18 nM for the different compounds. The repeatability was 1–3% (RSD) with an internal standard that was also extracted, and about twice without this standard. A throughput of 3.3 samples per hour was achieved and the liquid membrane was stable for more than a week.     

Studies on polyyne polymers containing transition metals in the main chain. VII. Synthesis and characterization of palladium-polyyne polymers

Metal-polyyne polymers consisting of palladium and conjugated acetylenic systems, where P_D and R represent the —Pd(PBu₃)₂—moiety and alkyl groups, respectively, were prepared by polycondensation between palladium chlorides and α,ω-diethynyl compounds in amines using a catalytic amount of cuprous iodide. The molecular weights of the polymers formed were greatly affected by the basicity of the amines and the addition of free phosphines to the polymerization system. Under the optimum conditions, i.e., in the presence of CuI and PBu₃ (in molar ratio 1/4) in piperidine at room temperature, polymer Ia (R¹ = R² = H) having M?_w = 29,000 was obtained.     

Polymers having stable radicals. II. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 1-hydroxy-2,2,6,6-tetramethylpiperidine

Polymers having stable pendant . radicals were synthesized through their precursor polymers by oxidizing them in air or by H₂O₂–Na₂WO₄. Hydrochlorides and sulfates of 4-methacryloylamino- and 4-methacryloyloxy-1-hydroxy-2,2,6,6-tetramethylpiperidines were synthesized as precursor monomers and polymerized by using α,α′-azobisisobutyronitrile under appropriate conditions to precursor polymers of high molecular weight: poly-4-methacryloylamino-/oxy-1-hydroxy-2,2,6,6-tetramethylpiperidinehydrochlorides and sulfates. The precursor polymers were converted to polymers having nitroxyl stable radicals, i.e., poly-4-methacryloylamino-/oxy-2,2,6,6-tetramethylpiperidine-1-oxyls, by oxidation in air or with H₂O₂–Na₂WO₄ without any main-chain scission. The structure of the resultant stable radical polymers was determined by infrared, ultraviolet, and ESR spectroscopy. Based on the results of spectroscopic analysis and Kjeldahl analysis, the transformation from precursors to nitroxyl stable radical polymers was found to be quantitative. Investigations on the applicability of polymeric nitroxyl radicals to oxidation-reduction reactions were attempted by means of polarography; the reduction half-wave potential was found to be ?1.16 V for the mercury pool.     

DNA-bleomycin interaction: Nucleotide sequence-specific binding and cleavage of DNA by bleomycin

Biosynthetic intermediates and synthetic analogues of bleomycin (BLM) have been investigated for their metal binding, dioxygen activation, and DNA cleavage. Molecular O₂ was activated by the Fe(II) complex of a synthetic model ligand. Nucleotide sequence specificities in DNA cleavage by the BLM-Fe(II) and deglyco-BLM-Fe(II) complexes were almost identical. It has been shown that (1) the β-aminoalanine-pyrimidine-β-hydroxyhistidine portion of BLM is essential for the metal binding and dioxygen activation and (2) the bithiazole moiety contributes to the specific binding to guanine base of DNA.     

Electronic structures of I2− and I4− ions in γ-irradiated rigid solutions

Radical-anions of iodine, bromine, and monoiodochloride are produced in γ-irradiated amorphous solids at 77 K, and their electronic and ESR spectra measured. On limited warming of the irradiated solution dimerization by the reaction I₂^? + I₂ → I₄^? occurs to produce the same species as reported by Fornier de Violet et al. The electronic structure of the dimeric anion is discussed in comparison with the monomeric anion.     

Separation of Leucas aspera,a medicinal plant of Bangladesh,guided by prostaglandin inhibitory and antioxidant activities

According to the traditional usage of the plant for antiinflammation and analgesia, Leucas aspera was tested for its prostaglandin (PG) inhibitory and antioxidant activities. The extract showed both activities, i.e., inhibition at 3 x 10(-4) g/ml against PGE(1)- and PGE(2)-induced contractions in guinea pig ileum and a 1, 1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging effect. The separation guided by the activities in these dual assay methods provided eight lignans and four flavonoids, LA-1- -12, among which LA-1- -7 and LA-10- -12 were identified as nectandrin B, meso-dihydroguaiaretic acid, macelignan, acacetin, apigenin 7-O-[6"-O-(p-coumaroyl)-beta-D-glucoside], chrysoeriol, apigenin, erythro-2-(4-allyl-2, 6-dimethoxyphenoxy)-1-(4-hydroxy-3-methoxyphenyl)propan-1-ol, myristargenol B, and machilin C, respectively. LA-8 was determined to be (-)-chicanine, the new antipode of the (+) compound, by spectroscopic methods including CD and ORD. Chiral-HPLC analysis of LA-9 showed that it was a mixture of two enantiomers, (7R, 8R)- and (7S, 8S)-licarin A. All of these components were first isolated from L. aspera. PG inhibition was observed in LA-1, LA-2, and LA-5, and antioxidant activity in LA-1- -3 and LA-8- -12.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Distribution pattern of rare earth ions between water and montmorillonite and its relation to the sorbed species of the ions.

REE (rare earth element) distribution coefficients (Kd) between the aqueous phase and montmorillonite surface were obtained to investigate the relation between the REE distribution patterns and the species of REE sorbed on the solid-water interface. It was shown that the features in the REE patterns, such as the slope of the REE patterns, the tetrad effect, and the Y/Ho ratio, were closely related to the REE species at the montmorillonite-water interface. In a binary system (REE-montmorillonite) below pH 5, three features (a larger Kd value for a lighter REE, the absence of the tetrad effect, and the Y/Ho ratio being unchanged from its initial value) suggest that hydrated REE are directly sorbed as an outer-sphere complex at the montmorillonite-water interface. Above pH 5.5, the features in the REE patterns, the larger Kd value for heavier REE, the M-type tetrad effect, and the reduced Y/Ho ratio, showed the formation of an inner-sphere complex of REE with -OH group at the montmorillonite surface. In addition, the REE patterns in the presence of humic acid at pH 5.9 were also studied, where the REE patterns became flat, suggesting that the humate complex is dominant as both dissolved and sorbed species of REE in the ternary system. All of these results were consistent with the spectroscopic data (laser-induced fluorescence spectroscopy) showing the local structure of Eu(III) conducted in the same experimental system. The present results suggest that the features in the REE distribution patterns include information on the REE species at the solid-water interface.     

Structure-activity relationship (SAR) studies on oxazolidinone antibacterial agents. 1. Conversion of 5-substituent on oxazolidinone

A structure-activity relationship (SAR) study on 5-substituted oxazolidinones as an antibacterial agent is described. The oxazolidinones, of which 5-acetylaminomethyl moiety was converted into other functions, were prepared and evaluated for antibacterial activity. Elongation of the methylene chain (8) and conversion of the acetamido moiety into guanidino moiety (12) decreased the antibacterial activity. The replacement of carbonyl oxygen (=O) by thiocarbonyl sulfur (=S) enhanced in vitro antibacterial activity. Especially, compound 16, which had the 5-thiourea group, showed 4-8 stronger in vitro activity than linezolid. Our SAR study revealed that the antibacterial activity was greatly affected by the conversion of 5-substituent.