LET distributions from CR-39 plates on Space Shuttle missions STS-84 and STS-91 and a comparison of the results of the CR-39 plates with those of RRMD-II and RRMD-III telescopes

The LET distributions during the Space Shuttle missions STS-84 (altitude 270-412 km, average 375 km; inclination angle, 51.6 degrees) and STS-91 (altitude 328-397 km, average 373 km; inclination angle, 51.6 degrees) were measured using CR-39 plastic nuclear track detectors. A correction for the dip-angle dependence of the track-formation sensitivity of the CR-39 plates was applied to the data analysis. The absorbed doses and the dose equivalents around RRMD Detector Units, estimated from the LET distributions in the LET region of 4-200 keV/micrometers, fluctuated with standard deviations of +/- 21% to +/- 35% in both flight experiments. The LET distributions obtained from the CR-39 plates agreed well with that obtained from RRMD-II in STS-91. However, the particle fluxes obtained from RRMD-III in STS-84 and STS-91 were two or three times higher than those obtained from RRMD-II and the CR-39 plates. It was concluded that the LET distributions obtained from RRMD-II and the CR-39 plates in the present flight experiments did not include the contribution of target-fragmented secondary heavy particles produced by low-LET particles, such as relativistic or semi-relativistic protons and helium ions, whereas RRMD-III was able to detect these secondary particles because of its low triggering level.     

10-Gbit/s optical receiver using ICs with low-capacitance HBT technology

A 10-Gbit/s optical receiver is developed using low-capacitance HBT IC technology. The HBT allows a cutoff frequency of 45 GHz and a maximum oscillation frequency of 70 GHz. The receiver contains an automatic gain-control amplifier IC with a gain of 16 dB, a bandwidth of 10.7 GHz, and a decision-circuit IC with an ambiguity of 66 mVp-p at a data rate of 10 Gbit/s. The sensitivity of this receiver is -26.5 dBm at a bit error rate of 10^-9. Transmission over a 140-km fiber was achieved successfully.     

Observation of transverse polarization asymmetries of charged pion pairs in e+e- annihilation near √s = 10.58 GeV

The interference fragmentation function translates the fragmentation of a quark with a transverse projection of the spin into an azimuthal asymmetry of two final-state hadrons. In e(+)e(-) annihilation the product of two interference fragmentation functions is measured. We report nonzero asymmetries for pairs of charge-ordered π(+)π(-) pairs, which indicate a significant interference fragmentation function in this channel. The results are obtained from a 672 fb(-1) data sample that contains 711 × 10(6) π(+)π(-) pairs and was collected at and near the Υ(4S) resonance, with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider.     

Performance Test of CW 300?GHz Gyrotron FU CW I

A 300 GHz CW gyrotron FU CW I has been developed and installed in the Research Center for Development of Far-Infrared Region, University of Fukui as a power source of a high frequency material processing system. Its performance was tested and the maximum power of 1.75 kW / CW has been attained at the beam voltage of 15 kV and the beam current of 1A. The maximum window power efficiency of 15.5% has been obtained at the cathode voltage slightly lower than 15 kV. This gyrotron is designed to deliver a Gaussian beam after mode conversion from the oscillation mode TE_22,8 in the cavity with a complex of an internal radiator and beam shaping mirrors. The detailed measurement with an infrared camera has confirmed that a Gaussian beam is radiated when the magnetic field strength B _c at the cavity is adjusted at a proper value. However, within a range of B _c , the output power is emerged into multiple directions, which suggests simultaneous oscillation of competing cavity modes.     

Dynamical study of femtosecond-laser-ablated liquid-aluminum nanoparticles using spatiotemporally resolved x-ray-absorption fine-structure spectroscopy

We study the temperature evolution of aluminum nanoparticles generated by femtosecond laser ablation with spatiotemporally resolved x-ray-absorption fine-structure spectroscopy. We successfully identify the nanoparticles based on the L-edge absorption fine structure of the ablation plume in combination with the dependence of the edge structure on the irradiation intensity and the expansion velocity of the plume. In particular, we show that the lattice temperature of the nanoparticles is estimated from the L-edge slope, and that its spatial dependence reflects the cooling of the nanoparticles during plume expansion. The results reveal that the emitted nanoparticles travel in a vacuum as a condensed liquid phase with a lattice temperature of about 2500 to 4200 K in the early stage of plume expansion.     

Dephasing of a superconducting flux qubit

In order to gain a better understanding of the origin of decoherence in superconducting flux qubits, we have measured the magnetic field dependence of the characteristic energy relaxation time (T(1)) and echo phase relaxation time (T(2)(echo)) near the optimal operating point of a flux qubit. We have measured T(2)(echo) by means of the phase cycling method. At the optimal point, we found the relation T(2)(echo) approximately 2T(1). This means that the echo decay time is limited by the energy relaxation (T(1) process). Moving away from the optimal point, we observe a linear increase of the phase relaxation rate (1/T(2)(echo)) with the applied external magnetic flux. This behavior can be well explained by the influence of magnetic flux noise with a 1/f spectrum on the qubit.     

Measurement Accuracy in Phase-Shifting Point Diffraction Interferometer with Two Optical Fibers

A phase-shifting point diffraction interferometer (PS/PDI) with point sources of two single mode optical fibers has been developed, which will be appropriate for the surface figure measurement of large aperture optics on a sub-nanometer scale. To reduce the measurement error factors, a fiber optic plate (FOP) is used as a projection plane for interference pattern. Errors caused by imperfection of optical alignment, such as position of point sources and tilt of FOP, are minimized by analyzing the measured phase data with an original method. Measurement accuracy in the PS/ PDI is estimated with the interference pattern produced by the two optical fiber sources. If inhomogeneity of the FOP and a systematic error of the PS/PDI are eliminated, the measurement accuracy of the present system is estimated to be less than 4nm P-V and 0.7nm rms, respectively, at a measurement wavelength of 632.8 nm.     

How is chiral symmetry restored at finite density?

Taking into account pseudoscalar as well as scalar condensates, we reexamine the chiral restoration path on the chiral manifold. We shall see both condensates coherently produce a density wave at a certain density, which delays chiral restoration as density or temperature is increased.