Ionic conductivity of superionic conducting glasses in the pseudobinary system AgIAg2MoO4

The ionic conductivity was measured in the temperature range 250–300 K as a function of composition of superionic conducting glasses in the pseudobinary system AgIAg₂MoO₄. The conductivity, ranging from 10^?2 to 10^?4 Ω^?1 cm^?1 at room temperature, increases linearly in logarithmic scale with increasing AgI content, while the total silver ion concentration remains nearly constant in the whole glass-forming region of the present system. Such a composition dependence of conductivity is considered to be evidence that only a fraction of the silver ions in glass contributes to the ionic conduction. The conductivity and the activation energy for conduction differ slightly between bulk glasses and pressed pellets of pulverized glasses. The close agreement in bulk glasses and pellets suggests that bulk rather than grain boundary or surface diffusion dominates the conduction process in the present glasses.     

Semi-micro size-exclusion chromatography of polymers : Calibration of columns and comparison with conventional columns

Stainless-steel tubes having inside diameters of 1.5 mm and 1.8 mm were packed with polystyrene gels of particle diameter 10 ± 2 μm. Two 50 cm × 1.8 mm I.D. packed columns, connected in series, were calibrated and molecular-weight averages of polystyrene NBS 706 were measured, the results coinciding with the data of the National Bureau of Standards. The peak widths of polystyrenes of narrow molecular-weight distributions in both semi-micro column (four 25 cm × 1.5 mm I.D.) and conventional column (two 50 cm × 8 mm I.D.; packed by the manufacturer) systems were determined at different mobile-phase velocities, and the minimum peak width in the latter system was obtained at the velocity of 0.2 mm/sec, which was higher than that for the semi-micro system. The interstitial volume was higher and the inner volume was lower for the semi-micro column system (1.8 mm I.D.) than those for the conventional one, which means that semi-micro columns were packed less densely, resulting in a steep calibration curve. The peak height of a solute was proportional to the cell length of an ultraviolet detector if the sample load was proportional to the cross-sectional areas of columns having the same column efficiency. Although conventional size-exclusion chromatography has many advantages in respect of velocity, calibration curtve and sample peak height, semi-micro size-exclusion chromatography still holds some merits such as low consumption of gels and of mobile-phase solvents.     

Determination of traces of lead and copper in foods by electrothermal atomic absorption spectrometry with metal atomizer

Summary A method is described for the determination of traces of lead and copper in foods by a microcomputer-processed atomic absorption spectrometry with a molybdenum micro-tube atomizer. Accurate results of lead and copper are obtained by atomization in the presence of thiourea. Thiourea contributes to a highly reproducible atomization profile and reduction of interferences from concomitant elements in foods. Solid samples are digested with nitric acid in the Uni-seal decomposition vessel, while liquid or water-soluble samples are directly atomized.

---

Bestimmung von Blei- und Kupferspuren in Lebensmitteln durch elektrothermische AAS mit einem Metallzerstäuber

Zusammenfassung Ein Verfahren zur Bestimmung von Blei- und Kupferspuren in Lebensmitteln mittels mikrocomputer-gesteuerter AAS mit einem Zerstäuber aus Molybdän wurde beschrieben. Die Zerstäubung in Gegenwart von Thioharnstoff gibt genaue Resultate. Dieser führt zu einem gut reproduzierbaren Zerstäubungsprofil und setzt die Störung von Begleitelementen herab. Feste Proben werden mit Salpetersäure aufgeschlossen, flüssige oder wasserlösliche Proben werden unmittelbar eingesetzt.

     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

Synthesis of end-functionalized polystyrenes with organosilicon end-capping reagents via living cationic polymerization

The end-functionalization of living polymers with bases (methanol, benzylamine, diethyl sodiomalonate, and sodium methoxide) and organosilicon compounds [X ? Si(CH₃)₃;X ? : CH₂?C(CH₃)COO? , CH₃COO? , CH₂?CHCH₂? , C₆H₅? ] was investigated in the living cationic polymerization of styrene initiated with the 1-phenylethyl chloride/SnCl₄/nBu₄NCl system in CH₂Cl₂ at ?15°C. The four bases and C₆H₅SiMe₃, independent of their structures, were apparently incapable of reacting with the living end and invariably led to polystyrenes with the ω-end chlorine [～ ～ ～ CH₂CH(Ph)Cl] originated from the initiating system. The number-average end-functionality (F?_n) of the chloride, determined by ¹H-NMR, was close to unity (F?_n > 0.9). The presence of chlorine in the polymer was also confirmed by elemental analysis. In contrast, the quenching by the trimethylsilyl compounds with X = methacryloxy, acetoxy, and allyl gave ω-end-functionalized polystyrenes with the corresponding terminal groups (X) for which the F?_n values were close to unity (F?_n > 0.9). The effects of the structure of silyl compounds on end-capping are also discussed. © 1994 John Wiley & Sons, Inc.     

Physical and Chemical Properties of Four-Membered Bis(triphenylphosphane)platinum(II) Sulfenato Thiolato Complexes

The reaction of isolable dithiirane 1-oxides with (Ph 3 P) 2 Pt( m 2 -C 2 H 4 ) provided the title complexes in high yields. 31 P NMR spectroscopy of the phosphine ligands of the complexes and x-ray crystallographic analysis of a complex were reported.     

Single-Round DNA Aptamer Selection by Combined Use of Capillary Electrophoresis and Next Generation Sequencing: An Aptaomics Approach for Identifying Unique Functional Protein-Binding DNA Aptamers

In DNA aptamer selection, existing methods do not discriminate aptamer sequences based on their binding affinity and function and the reproducibility of the selection is often poor, even for the selection of well-known aptamers like those that bind the commonly used model protein thrombin. In the present study, a novel single-round selection method (SR-CE selection) was developed by combining capillary electrophoresis (CE) with next generation sequencing. Using SR-CE selection, a successful semi-quantitative and semi-comprehensive aptamer selection for thrombin was demonstrated with high reproducibility for the first time. Selection rules based on dissociation equilibria and kinetics were devised to obtain families of analogous sequences. Selected sequences of the same family were shown to bind thrombin with high affinity. Furthermore, data acquired from SR-CE selection was mined by creating sub-libraries that were categorized by the functionality of the aptamers (e. g., pre-organized aptamers versus structure-induced aptamers). Using this approach, a novel fluorescent molecular recognition sensor for thrombin with nanomolar detection limits was discovered. Thus, in this proof-of-concept report, we have demonstrated the potential of a “DNA Aptaomics” approach to systematically design functional aptamers as well as to obtain high affinity aptamers.     

5,11-Diazadibenzo[hi,qr]tetracene: Synthesis,Properties, and Reactivity toward Nucleophilic Reagents

5,11-Diazadibenzo[hi,qr]tetracene was synthesized as a new nitrogen-substituted polycyclic heteroaromatic compound by Pd-catalyzed cycloisomerization of an alkyne precursor followed by oxidative cyclization with bis(trifluoroacetoxy)iodobenzene. The substitution of imine-type nitrogen atoms significantly enhanced its electron-accepting character and facilitated the direct nucleophilic addition of arylamines under strongly basic conditions to afford the desired amino-substituted products. The introduction of amino groups induced a remarkable red-shift in their absorption spectra; the tetrasubstituted product exhibited intense near-infrared absorbing property. Furthermore, the π-electronic system, which includes a redox-active 1,4-diazabutadiene moiety, underwent reversible interconversion to its corresponding reduced form upon reduction with NaBH₄ and aerobic oxidation.