Study on crystalline properties of Er-Si-O compounds in relation to Er-related 1.54 μm photoluminescence and electrical properties

Er-Si-O crystalline compounds, which exhibit superlattice structures and sharp and strong Er-related 1.54 μm photoluminescence (PL) spectra at room temperature have been formed by self-assembling growth mechanism. Oxidation of the starting materials which have Si and Er at an atomic ratio of 2:1 are prepared and then oxidation and succeeding high-temperature annealing in Ar above 1250 °C cause a self-assembled superlattice-structured Er-Si-O crystalline compounds. The control of the ratio of Si and Er, as well as the following oxidation and annealing processes, is found to be sensitive to the crystalline properties, PL spectra and electrical properties. In this study, Er-Si-O crystalline thin films are formed on Si substrates by sol-gel and MOMBE methods, and their crystalline properties such as crystalline orientation and concentration ratio of Er, Si and O are investigated. Crystalline Er-Si-O films of high orientation are successfully grown on Si(1 0 0) and its inclined surface. The PL and excitation spectra, fluorescence decay and the electrical properties are found to be strongly related to the crystalline properties. Excess O causes a broader 1.54 μm PL spectra, slower fluorescence decay, lower carrier-mediated excitation and higher resistivity. A precise control of O is found to be necessary to grow superlattice-structured Er-Si-O compounds, which are semiconducting and are excitable via carrier-mediated excitation mechanism.     

Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Existence of solution for Eguchi-Oki-Matsumura equation describing phase separation and order-disorder transition in binary alloys

In this paper we consider the Eguchi-Oki-Matsumura equation which consists of the fourth- and second-order coupled equations of parabolic type. It is shown that this system admits the unique global solution.     

Analytical Designing of Two-Aspherical-Mirror Anastigmats Permitting Practical Misalignments in a Soft-X-Ray Optics

A new analytical method of designing two-aspherical-mirror anastigmats was developed and applied to searching solution groups of soft X-ray microscopes of a large misalignment tolerance. The two-mirror anastigmat configurations were expressed by a practical variable related to pupil obstruction limiting the system throughput. Axial coma and other aberrations caused by a slight decenter of the system were then formulated to represent sensitivity to misalignment. These formulations enabled a global survey of solution groups as demonstrated by a designing example of soft X-ray microscopes with a magnification m = −1/50, which resulted in four solutions more insensitive to misalignment than a standard Schwarzschild optics in the soft X-ray region. Some solutions were also found to have much larger fields of view suitable for high resolution imaging as confirmed by computer ray tracing.     

Synthesis of thromboxane A2 analog DL-(9,11), (11,12)-dideoxa-(9,11)-epithio-(11,12)-methylene-thromboxane A2

A synthesis of the thromboxane A₂ analog, $\text{dl}$-(9,11), (11,12)-dideoxa-(9,11)-epithio-(11,12)-methylene-thromboxane A₂ is described.     

The crystal structures of α- and β-CdUO4

The structural parameters of α- and β-CdUO₄ crystals are determined by X-ray powder diffraction technique. α-CdUO₄ is rhombohedral and cell parameters are a = 6.233(3) Å and α = 36.12(5)°. β-CdUO₄ crystallizes in a C-centered orthorhombic cell with a = 7.023(4), b = 6.849(3), c = 3.514 (2) Å. The space groups are $\text{R}\text{3}\text{m}$ for α-CdUO₄ and Cmmm for β-CdUO₄. α-CdUO₄: 1U in (000), 1Cd in ($\text{1}\text{2}\text{1}\text{2}\text{1}\text{2}$), 2O(1) in ±(uuu), 2O(2) in ±(vvv); u = 0.113, v = 0.350, Z = 1. β-CdUO₄: 2U in ($\text{000;}\text{1}\text{2}\text{1}\text{2}\text{0}$), 2Cd in ($\text{1}\text{2}\text{0}\text{1}\text{2}\text{; 0}\text{1}\text{2}\text{,}\text{1}\text{2}$), 4O(1) in ($\text{0, ±y, 0;}\text{1}\text{2}\text{,}\text{1}\text{2}\text{±y, 0}$), 4O(2) in ($\text{±x, 0,}\text{1}\text{2}\text{;}\text{1}\text{2}\text{±x,}\text{1}\text{2}\text{,}\text{1}\text{2}$); x = 0.159, y = 0.278, Z = 2. β-CdUO₄ contains collinear uranyl UO²⁺₂ groups with a UO(1) distance of 1.91 Å, located either along or parallel to the c axis whereas the UO(1) bond length in α-CdUO₄ is 1.98 Å which is longer than the usual uranyl bond length.     

Vortex shedding from a ring in shear flow

Vortex shedding from a bluff ring in a linear shear flow has been investigated experimentally. The shedding frequency, measured using a hot wire in various positions within the near wake of the ring, was found to be remarkably insensitive to a mean flow shear parameter, , defined by (d/U _o).U/y, where d is the mean ring diameter and U _o is the undisturbed upstream velocity on the ring axis; even for = 0.41, corresponding to a velocity variation of about ±24% across the outer ring diameter, the Strouhal number was only about 5% lower than in uniform flow. However, the strong axisymmetric shedding which dominates the flow for = 0 is significantly affected by shear. Indeed, spatial correlation measurements demonstrated that the shedding actually becomes anti-symmetric at the highest values of . The implication of these results is that vortex flowmeters constructed using a ring as the shedding body would be relatively unaffected by changes in the upstream mean flow profile.     

Polymer-Supported dicyanoketene acetal as a pi-acid catalyst: monothioacetalization and carbon-carbon bond formation of acetals

Polymeric dicyanoketene acetals (DCKA) were synthesized by copolymerization of styrene and divinylbenzene or ethylene glycol dimethacrylate. These novel polymers could be used successfully as recyclable pi-acid catalysts in monothioacetalization or carbon-carbon bond forming reaction of acetals.