Synthesis of poly(benzoxazole)s by direct polycondensation of dicarboxylic acids with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid as condensing agent and solvent

A convenient method for the synthesis of poly(benzoxazole)s of high molecular weights has been developed. These polymers were prepared readily by direct polycondensation of aromatic dicarboxylic acids containing phenyl either structure with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid (PPMA) as condensing agent and solvent. Polycondensations proceeded fast and was completed within 5 h at 140°C and produced poly(benzoxazole)s with inherent viscosities up to 4.6 dL/g. Model compound work was performed in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(benzoxazole)s showed 10% weight loss in air and nitrogen at 450–505°C and 465–535°C, respectively.     

Excited states of porphyrin isomers and porphycene derivatives: a SAC-CI study

Excited states of free-base porphyrin isomers, porphycene (Pc), corrphycene (Cor), and hemiporphycene (hPc), were studied by the Symmetry-Adapted Cluster (SAC)/SAC-Configuration Interaction (CI) method. The absorption peaks of the porphyrin isomers were assigned on the basis of the SAC-CI spectra. The X, Y, X', and Y' bands of the porphyrin isomers, which have weak intensities, are identified. The differences in the Q-band absorptions among the isomers were clearly explained by the four-orbital model. In Cor and hPc, the wave function of the B-band corresponds to the mixture of the four-orbital excitations and the optically forbidden excitation of free-base porphin (P), due to the molecular symmetry lowering in the isomers. The B-band character is described by the five-orbital model in Pc and the six-orbital model in Cor and hPc. Two tetrazaporphycenes and two ring-extended (dibenzo) porphycenes were designed, and the Q-band transition moment was successfully controlled. These examples show that the control of the four-orbital energy levels is the guiding principle for pigment design in porphyrin compounds.     

Guest shape-responsive fitting of porous coordination polymer with shrinkable framework

In situ synchrotron X-ray powder diffraction patterns of porous coordination polymers [[Cu(2)(pzdc)(2)(bpy)].G] have been measured (pzdc = pyrazine-2,3-dicarboxylate, bpy = 4,4'-bipyridine) (where G = H(2)O for CPL-2 superset H(2)()O, G = benzene for CPL-2 superset benzene, and G = void for the apohost). The structures of apohost and CPL-2 superset benzene were determined from Rietveld analysis. Adsorption of benzene in the channels induced a remarkable contraction in the crystal (b axis; 6.8%, volume; 4.9%), although the channels were occupied by the benzene molecules. This crystal transformation provides a new pore structure that is well suited for benzene molecules, and we denote it as a "shape-responsive fitting" transformation. This type of pore gives rise to a new guideline: frameworks can be composed of flexible motifs that are linked via strong bond and/or stiff motifs that are connected via weaker bonds.     

Preparation and photolysis of polyamides having coumarin dimer component

The ring-opening polyaddition reaction of anti and syn head-to-head Coumarin dimers with diamines and the photocleavage behavior of the resulting polyamides were investigated. Anti head-to-head Coumarin dimer successfully reacted with aliphatic and aromatic diamines in an aprotic polar solvent to give corresponding high molecular weight polyamides. The polyamides showed good film forming ability and exhibited solubility behavior typical of polyelectrolytes. Furthermore, these polyamides were found to undergo exclusively asymmetric photocleavage on the cyclobutane rings in the polymer main chain to give a fumaramide unit with elimination of 2,2′-dihydroxystilbene. On the other hand, syn head-to-head Coumarin dimer gave only low molecular weight polyamides. These polymerization and photocleavage behaviors were elucidated in comparison with those of model reactions.     

Changeable reactivity of ketyl radicals derived from 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones depending on electron transfer conditions employed

Photoinduced electron transfer reaction of 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones with amines afforded 5-exo radical cyclization products while electron transfer reaction with samarium diiodide produced cyclopropanols.     

The counterion releasing effect and the partition coefficient of branched alkanols in ionic micellar solution

In the micellar solution of SDS, the partition coefficient (K_x) of following branched alkanols at infinite dilution was determined by applying a differential conductivity method: the alkanols used were i-C_mH_2m+1OH (m=4-9, i=1-5) in which the position of OH group (i) shifts from an end to the center of a hydrocarbon chain. The method provides two significant quantities, d!/dX_am and dC_sf/dC_af in addition to K_x. The following results have been obtained. (1) The dependence of K_x on i indicates that the hydrophobicity of alkanol is weakened with increasing i, whereas the increase in m strengthens the hydrophobicity. (2) The degree of counterion disossiation of micelles (!) is accelerated by the solubilized alkanols in micelles (mole fraction: X_am) and the acceleration rate, d!/dX_am (=0.17), depends on neither m nor i. (3) In the bulk water, the monomerically dissolved alkanols (concentration: C_af) depresses the concentration of free monomer surfactant (C_sf), and the depressing rate, dC_sf/dC_af, in micellar solution is identical with the corresponding quantity, ((CMC/(C_a)_o at CMC.     

Valency states of radioactive antimony in hydrochloric acid solutions. Preparation and stability of antimony tracer for radioanalytical use

Variations of¹²⁵Sb valency states in HCl solutions were investigated by the use of the N-benzoyl-N-phenyl-hydroxylamine (BPHA) extraction method.¹²⁵Sb(V) is completely reduced to Sb(III) by one hour refluxing in conc. HCl.¹²⁵Sb(III) is gradually oxidized to Sb(V) in solutions of low HCl concentrations by the effects of their own radiations. Natural light promotes such oxidation reactions. By utilizing such oxidation-reduction effects¹²⁵Sb(V) can be easily prepared from¹²⁵Sb(III) and also¹²⁵Sb(III) can be prepared by the reduction of Cl _aq ⁻ . Their valency states were stable on keeping them in brown-colored bottles at 6M HCl concentrations.     

Inclusion of cut and as-grown single-walled carbon nanotubes in the helical superstructure of schizophyllan and curdlan (beta-1,3-glucans)

We have found that single-chain schizophyllan and curdlan (s-SPG and s-curdlan, respectively) can dissolve as-grown and cut single-walled carbon nanotubes (ag-SWNTs and c-SWNTs, respectively) in aqueous solution. The vis-NIR spectra of the composites suggest that c-SWNTs are dissolved as a bundle, whereas ag-SWNTs exist as one or only a few pieces in the tubular hollow constructed by the helical structure inherent to these beta-1,3-glucans. EDX and CLSM measurements and TEM observation established that the distribution map of these polysaccharides overlaps well with the image of SWNTs, indicating that these two components form a composite. Very interestingly, when c-SWNTs were dissolved with the aid of s-SPG or s-curdlan in water, a clear periodical structure with inclined stripes, as detected by AFM, appeared on the fibrous composite surface. Because this periodical structure has never been recognized for the composites with other water-soluble polymers, one can regard that s-SPG or s-curdlan wraps c-SWNTs constructing a helically twined structure. High-resolution TEM observation of an ag-SWNTs/s-SPG composite gave a clearer image in that two s-SPG chains twine one ag-SWNT and the helical motif is right-handed. When this sample was subjected to the AFM measurement, the composite showed the 2-3 nm height. This height implies that one piece of ag-SWNT is included in the s-SPGs helical structure. As a summary, it has been established that beta-1,3-glucans such as s-SPG and s-curdlan not only dissolve SWNTs but also create a novel superstructure on the surface.     

Synthesis and antinociceptive activity of orally active opioid peptides: improvement of oral bioavailability by esterification

To improve the oral bioavailability of a dermorphin tetrapeptide analog, N(alpha)-1-iminoethyl-Tyr-D-MetO-Phe-MebetaAla-OH (III), which has a potent analgesic activity after oral administration, various derivatives were synthesized to increase lipophilicity by esterification of the C-terminal carboxyl group and/or acylation of the phenolic hydroxyl group on Tyr1. Antinociceptive activity was evaluated after subcutaneous or oral administration using the mouse tail pressure test. As a result, increased antinociceptive activity after oral administration as well as an improved ED50(p.o.)/ED50(s.c.) ratio, which is an indicator of oral bioavailability, were found for some compounds. With regard to the improvement of bioavailability, derivatives with acylation of the phenolic hydroxyl group on Tyr1 showed better results than derivatives with esterification of the C-terminal carboxyl group. In particular, an ED50(p.o.)/ED50(s.c.) ratio equivalent to that of morphine was found for an acetylated derivative, N(alpha)-1-iminoethyl-Tyr(COMe)-D-MetO-Phe-MebetaAla-OH (7a), as well as for a methoxycarbonylated derivative, N(alpha)-1-iminoethyl-Tyr(CO2Me)-D-MetO-Phe-MebetaAla-OH (7l).