Lactococcus lactis catalyses electricity generation at microbial fuel cell anodes via excretion of a soluble quinone

Lactococcus lactis is a gram-positive, normally homolactic fermenter that is known to produce several kinds of membrane associated quinones, which are able to mediate electron transfer to extracellular electron acceptors such as Fe³⁺, Cu²⁺ and hexacyanoferrate. Here we show that this bacterium is also capable of performing extracellular electron transfer to anodes by utilizing at least two soluble redox mediators, as suggested by the two-step catalytic current developed. One of these two mediators was herein suggested to be 2-amino-3-dicarboxy-1,4-naphthoquinone (ACNQ), via evaluation of standard redox potential, ability of the bacterium to exploit the quinone when exogenously provided, as well as by high performance liquid chromatography coupled with UV spectrum analysis. During electricity generation, L. lactis slightly deviated from its normal homolactic metabolism by excreting acetate and pyruvate in stoichiometric amounts with respect to the electrical current. In this metabolism, the anode takes on the role of electron sink for acetogenic fermentation. The finding that L. lactis self-catalyses anodic electron transfer by excretion of redox mediators is remarkable as the mechanisms of extracellular electron transfer by pure cultures of gram-positive bacteria had previously never been elucidated.     

LIGHT INDUCED FLUORESCENCE SPECTRAL CHANGES IN NATIVE PHYTOCHROME FROM Secale cereale L. AT LIQUID NITROGEN TEMPERATURE

Abstract— Fluorescence spectra of native rye phytochrome were determined under different light conditions at liquid nitrogen temperature. Fluorescence spectrum of the red-light-absorbing form (Pr) had a major peak at about 685 nm (14 600 cm⁻¹) and a broad sub-peak at about 515 nm (19 400 cm⁻¹). The peak height at 685 nm was reduced by irradiation with monochromatic light of 640 nm, and a new peak became obvious at about 702 nm (14250 cm⁻¹). This spectral change was almost completely reversed by subsequent irradiation with 700-nm light. Fluorescence spectrum of the photoequilibrium mixture of Pr and far-red-light absorbing form under continuous red light showed a sharp peak at about 685 nm having a peak height ca. 12% of Pr, and a broad sub-peak at about 508 nm (19 700 cm⁻¹). Light of 730 nm did not reduce the peak height at about 685 nm but induced a new shoulder at about 699 nm (14300 cm⁻¹). Monochromatic light of 640 and 700 nm given following the light of 730 nm could not reverse the spectral change at 699 nm induced by the irradiation with 730-nm light. Fluorescence spectrum of Pr in partially degraded phytochrome was similar to that in native phytochrome but the peak position in the red region was shifted by about 5 nm (100 cm⁻¹) to the blue.     

Modern synthetic methods for fluorine-substituted target molecules

Fluorine has come to be recognized as a key element in materials science: in heat-transfer agents, liquid crystals, dyes, surfactants, plastics, elastomers, membranes, and other materials. Furthermore, many fluorine-containing biologically active agents are finding applications as pharmaceuticals and agrochemicals. Progress in synthetic fluorine chemistry has been critical to the development of these fields and has led to the invention of many novel fluorinated molecules as future drugs and materials. As a result of the electronic effects of fluorine substituents, fluorinated substrates and reagents often exhibit unusual and unique chemical properties, which often make them incompatible with established synthetic methods. Thus, the problem of how to control the unusual properties of compounds with fluorine substituents deserves much attention, so as to promote the design of facile, efficient, and environmentally benign methods for the synthesis of valuable organofluorine targets.     

Effect of explicit cationic size and valence constraints on the phase stability of 1:2 B-site-ordered perovskite ruthenates

The related parameters of cation size and valence that control the crystallization of Sr(3)CaRu(2)O(9) into a 1:2 B-site-ordered perovskite structure were explored by cationic substitution at the strontium and calcium sites and by the application of high pressure. At ambient pressures, Sr(3)MRu(2)O(9) stoichiometries yield multiphasic mixtures for M = Ni(2+), Mg(2+), and Y(3+), whereas pseudocubic perovskites result for M = Cu(2+) and Zn(2+). For A-site substitutions, an ordered perovskite structure results for Sr(3-x)Ca(x)CaRu(2)O(9), with 0 相似文献   

Stereoselective synthesis of amphiasterin B4: assignment of absolute configuration

The first asymmetric synthesis of (+)-amphiasterin B4 was completed from a known (S)-β-benzyloxy-γ-lactone. Comparison with the spectroscopic properties reported for authentic material has given a clear indication as to the absolute stereochemistry of the natural amphiasterin B4.     

Reversible Sodium Metal Electrodes: Is Fluorine an Essential Interphasial Component?

Alkaline metals are an ideal negative electrode for rechargeable batteries. Forming a fluorine‐rich interphase by a fluorinated electrolyte is recognized as key to utilizing lithium metal electrodes, and the same strategy is being applied to sodium metal electrodes. However, their reversible plating/stripping reactions have yet to be achieved. Herein, we report a contrary concept of fluorine‐free electrolytes for sodium metal batteries. A sodium tetraphenylborate/monoglyme electrolyte enables reversible sodium plating/stripping at an average Coulombic efficiency of 99.85 % over 300 cycles. Importantly, the interphase is composed mainly of carbon, oxygen, and sodium elements with a negligible presence of fluorine, but it has both high stability and extremely low resistance. This work suggests a new direction for stabilizing sodium metal electrodes via fluorine‐free interphases.     

Intense Red-Blue Luminescence Based on Superfine Control of Metal–Metal Interactions for Self-Assembled Platinum(II) Complexes

A series of assembled Pt^II complexes comprising N-heterocyclic carbene and cyanide ligands was constructed using different substituent groups, [Pt(CN)₂(R-impy)] (R-impyH⁺=1-alkyl-3-(2-pyridyl)-1H-imidazolium, R=Me ( Pt-Me ), Et ( Pt-Et ), ⁱPr ( Pt- ⁱ Pr ), and ^tBu ( Pt- ^t Bu )). All the complexes exhibited highly efficient photoluminescence with an emission quantum yield of 0.51–0.81 in the solid state at room temperature, originating from the triplet metal-metal-to-ligand charge transfer (³MMLCT) state. Their emission colors cover the entire visible region from red for Pt-Me to blue for Pt- ^t Bu . Importantly, Pt- ^t Bu is the first example that exhibits blue ³MMLCT emission. The ³MMLCT emission was proved and characterized based on the temperature dependences of the crystal structures and emission properties. The wide-range color tuning of luminescence using the ³MMLCT emission presents a new strategy of superfine control of the emission color.     

Aggregation-induced emission and thermally activated delayed fluorescence of 2,6-diaminobenzophenones

Exploration of novel organic luminophores that exhibit thermally activated delayed fluorescence (TADF) in the aggregated state is very crucial for advance of delayed luminescence-based applications such as time-gated bio-sensing and temperature sensing. We report herein that synthesis, photophysical properties, molecular and crystal structures, and theoretical calculations of 2,6-bis (diarylamino)benzophenones. Absorption spectra in solution and calculations using density functional theory (DFT) method revealed that the optical excitation took place through intramolecular charge-transfer from one diarylamino moiety to an aroyl group. While the benzophenones did not luminesce in solution, the solids of the benzophenones emitted green light with moderate-to-good quantum yields. Thus, the benzophenones exhibit aggregation-induced emission. Based on the lifetime measurement, the green emission of the solids was found to include TADF. The emergence of the TADF is supported by the small energy gap between the excited singlet and triplet states, which was estimated by time-dependent DFT calculations. Thin films of poly(methyl methacrylate) doped by the benzophenones also showed green prompt and delayed fluorescence whose lifetimes were in the order of microseconds. Linear correlation between logarithm value of TADF lifetime and temperature was observed with the benzophenone in powder, suggesting that the benzophenones can serve as molecular thermometers workable under aqueous conditions.     

Synthesis of 4,6-disubstituted 2-methylpyridines and their 3-carboxamides

A new one-pot synthesis of title compounds by the reactions of α,β-unsaturated carbonyl compounds with β-aminocrotononitrile in the presence of sodium hydroxide is described.     

Preparation and photolysis of polyamides having coumarin dimer component

The ring-opening polyaddition reaction of anti and syn head-to-head Coumarin dimers with diamines and the photocleavage behavior of the resulting polyamides were investigated. Anti head-to-head Coumarin dimer successfully reacted with aliphatic and aromatic diamines in an aprotic polar solvent to give corresponding high molecular weight polyamides. The polyamides showed good film forming ability and exhibited solubility behavior typical of polyelectrolytes. Furthermore, these polyamides were found to undergo exclusively asymmetric photocleavage on the cyclobutane rings in the polymer main chain to give a fumaramide unit with elimination of 2,2′-dihydroxystilbene. On the other hand, syn head-to-head Coumarin dimer gave only low molecular weight polyamides. These polymerization and photocleavage behaviors were elucidated in comparison with those of model reactions.