Direct catalytic asymmetric Mannich-type reaction of beta-keto phosphonate using a dinuclear Ni2-Schiff base complex

Direct catalytic asymmetric Mannich-type reactions of beta-keto phosphonates are described. A homodinuclear Ni 2-Schiff base complex promoted the reaction at 0 degrees C, giving beta-amino phosphonates in up to 90% yield, 20:1 dr, and 99% ee. Control experiments suggested that two Ni metals are important for achieving high yield and stereoselectivity.     

Locking the Conformation of a Paddlewheel Rhodium Complex: Design,Synthesis, and Applications in Catalytic Nitrene Transfers

The exponential proliferation of conformers makes it impossible to examine the entire population in most systems. Controlling conformational ensembles is thus pivotal in many areas of chemistry. Rh₂(esp)₂, a dicarboxylate-derived paddlewheel rhodium complex, is one of the most effective catalysts for nitrene chemistry. Its enormous success has led to preparing many analogous complexes. However, there has been little consideration for the conformational dynamics of the parent catalyst. Herein, we report a new ligand modification principle that prevents conformer interconversion. The resulting complex comprises two isolable conformers, whose structures have been determined by X-ray diffraction. Combined experimental and computational data has revealed similarities and dissimilarities between the conformationally confined and parent complexes. Three model cases have demonstrated the utility of conformational fixation in the development of stereoselective catalysts for nitrene transfer reactions. The design principle described in this study can be combined with other established modification strategies, serving as a springboard for further advancement of the chemistry of paddlewheel metal complexes.     

A catalytic enantioselective conjugate addition of cyanide to enones

The first synthetically useful catalytic enantioselective conjugate addition of cyanide to enones is described. The optimized conditions involved a Gd catalyst (5 or 10 mol %) derived from ligands 3 or 4 and a 1:1 ratio of TBSCN and 2,6-dimethylphenol. The reaction exhibited excellent to high enantioselectivity and a wide substrate scope. Moreover, the 1,4-adduct was exclusively produced over the 1,2-adduct. The complete regioselectivity was due both to stabilization of the 1,4-selective silylated polymetallic catalyst (7) using a TBS group and the ability of the asymmetric catalyst to promote retro-cyanation from the 1,2-adduct.     

Ba-catalyzed direct Mannich-type reactions of a beta,gamma-unsaturated ester providing beta-methyl aza-Morita-Baylis-Hillman-type products

Barium-catalyzed direct Mannich-type reactions of a beta,gamma-unsaturated ester are described. The Ba-catalyst not only promoted the Mannich-type reactions, but also isomerized Mannich adducts to afford beta-methyl aza-Morita-Baylis-Hillman-type products in 61-88% yield from various aryl, heteroaryl, and alkyl imines. Preliminary trials on enantioselective variants with a chiral biaryldiol ligand gave products in up to 80% ee.     

Micelle structures in aqueous solutions of glucose-based surfactants having an isoprenoid-type hydrophobic chain

Surfactant self-diffusion coefficients have been measured on a binary system of 1-O-beta-3,7-dimethyloctyl-D-maltopyranoside (beta-Mal(2)(Ger))/water and a mixed surfactant system of beta-Mal(2)(Ger)/1-O-beta-3,7-dimethyloctyl-D-glucopyranoside (beta-Glc(Ger))/water at 25 degrees C. For comparison, measurements have also been made on 1-O-beta-decyl-D-maltopyranoside (beta-Mal(2)C(10))/water and beta-Mal(2)C(10)/1-O-beta-decyl-D-glucopyranoside (beta-GlcC(10))/water. The hydrodynamic radius of beta-Mal(2)(Ger) micelles obtained from the micellar diffusion coefficient is around 3 nm and nearly equal to that of beta-GlcC(10) micelles within experimental error. In the mixed surfactant systems, the hydrodynamic radii for both systems increase with increasing X(G) (the mole fraction of beta-Glc(Ger) or beta-GlcC(10) in the total mixed solute) above X(G) congruent with 0.4 when the total surfactant concentration is kept constant at 2 wt%. The R(H) of beta-Glc(Ger)/Mal(2)(Ger) micelles increases more rapidly than beta-GlcC(10)/beta-Mal(2)C(10) micelles, and then phase separation occurs at X(G) congruent with 0.65. On the other hand, the R(H) of beta-GlcC(10)/beta-Mal(2)C(10) micelles continues to increase until the phase separation occurs at X(G) congruent with 0.92. Measurements have also been performed as a function of total surfactant concentration at constant X(G) (=0.6). The CMC of the beta-Glc(Ger)/Mal(2)(Ger) system is larger than that of the beta-GlcC(10)/beta-Mal(2)C(10) system as expected from the results of the pure surfactant systems published previously. The R(H) increases with increasing total surfactant concentration for both systems. At higher concentrations, the R(H) of beta-Glc(Ger)/Mal(2)(Ger) micelles increases more rapidly than beta-GlcC(10)/beta-Mal(2)C(10) micelles. These results can be explained by the fact that the geranyl and decyl chains have the same volume but different chain lengths.     

Unidirectional crystallization of charged colloidal silica due to the diffusion of a base

Dilute aqueous dispersions of charged colloidal silica (particle volume fraction = approximately 0.03-0.04, particle diameter = 110 nm) exhibit unidirectional crystal growth due to the diffusion of a weak base, pyridine (Py). Similar diffusion-crystallization is enabled by a salt of a weak acid and a strong base, sodium hydrogen carbonate (NaHCO3). The resulting crystals consist of columnar (or cubic) crystal grains with a maximum height of a few centimeters and a maximum width of 1 cm. The crystal growth process is attributed to a combination of (i) the diffusion of Py or NaHCO3 accompanied by a charging reaction of the silica particles and (ii) the charge-induced crystallization of the silica colloids. Theoretical growth curves based on the reaction-diffusion model for the case of Py were in good agreement with the observed curves. We also report the immobilization of the resulting large crystals by using a polymer hydrogel matrix.     

Switching of a Semiconductor Laser with Multi-Detuned Optical Inputs by Controlling Injection Current

The multistability of a Fabry-Perot semiconductor diode laser for an injection current is presented when multi-optical inputs detuned from the cavity-resonant wavelength of a semiconductor laser are injected. m+1 Multi-stable states are shown to be produced in the optical output versus injection current characteristics for m detuned optical inputs. It is shown that optical output can be switched in any one of the optical input wavelengths in a relatively fast response time by applying injection current pulses. Analytical expression based on linear stability analysis is presented to predict the switching time to free oscillating mode, and larger optical input power and detuning are effective to shorten the switching time. The results here are believed to be useful to extend wavelength switching to a scope of electronic manipulation without modulation of optical inputs and can be applicable to actual devices.     

Cationic ring‐opening polymerization of 1,6‐anhydro‐2,3,4‐tri‐O‐allyl‐β‐D‐glucopyranose as a convenient synthesis of dextran

For the convenient synthesis of (1→6)‐α‐D ‐glucopyranan, i. e., dextran ( 4 ), ring‐opening polymerization of 1,6‐anhydro‐2,3,4‐tri‐O‐allyl‐β‐D ‐glucopyranose ( 1 ) has been carried out using BF₃·OEt₂. With a ratio of [BF₃·OEt₂]/[ 1 ] = 0.5 at 0 °C for 140 h, the yield and M_n of the obtained polymer are 84.0% and 21 700, respectively. The polymer consists of (1→6)‐α‐linked 2,3,4‐tri‐O‐allyl‐D ‐glucopyranose ( 2 ) which is similar to the results for the cationic ring‐opening polymerization of 1,6‐anhydro‐2,3,4‐tri‐O‐methyl‐β‐D ‐glucopyranose and 1,6‐anhydro‐2,3,4‐tri‐O‐ethyl‐β‐D ‐glucopyranose. Polymer 2 was isomerized using tris(triphenylphosphine)‐chlororhodium as the catalyst in toluene/ethanol/water to yield polymeric 2,3,4‐tri‐O‐propenyl‐(1→6)‐α‐D ‐glucopyranan ( 3 ). Deprotection of the propenyl ether linkage of 3 was then performed using hydrochloric acid in acetone to give 4 .