Pico- and nano-second laser flash photolysis study on photoinduced charge separation in oligothiophene-C60 dyad molecules

Photoinduced charge separation (CS) and charge recombination (CR) processes of octathiophene-C₆₀ and dodecathiophene-C₆₀ dyad molecules (8T-C₆₀ and 12T-C₆₀, respectively) have been investigated by time-resolved absorption spectroscopy in the visible and near-IR regions. In toluene, ¹8T*-C₆₀ and ¹12T*-C₆₀ showed energy transfer to ¹C*-moiety predominantly, while 60 contribution of CS was small. In various polar solvents, on the other hand, CS states were predominantly formed from both singlet-excited oligothiophene and ¹C6*0-moiety because of lower CS level in polar environments. The CR process generating both the triplet state of oligothiophene and the ground state was confirmed in anisole and anisole/toluene mixture within a few nanoseconds. In more polar solvents (dielectric constant (∈_s) > 7), CS states showed two components decay: Slow decay component showed lifetime in the hundred nanosecond-region, while fast component decayed within a few nanoseconds. For the mechanism of the long-living CS state in polar solvents (∈_s > 7), equilibrium between the CS state and the triplet state was proposed. Furthermore, effects of length of oligothiophene on the CS and CR processes were discussed on the basis of the free energy changes.     

High-yield Carbonization of Cellulose by Sulfuric Acid Impregnation

The carbonization of cellulose with sulfuric acid impregnation was studied by thermogravimetric analysis and scanning electron microscopy. The mass yield of carbon after 800°C treatment in nitrogen increased to 2–3 times by addition of small amounts of sulfuric acid. The sulfuric acid is considered to work as dehydration catalyst, thus suppressing the release of volatile organic substances. The shrinkage of the sample during carbonization was also significantly reduced by the addition of sulfuric acid.     

Electric effects on the rheology of insulating oils in electrodes with flocked fabric

The rheological behavior of insulating oils is studied in nonuniform electric fields which are generated by an electrode covered with flocked fabric. Although the oils show no electrorheological effects in uniform fields between metal electrodes with smooth surfaces, the flocked fabric leads to a striking increase of viscosity in steady shear. The viscosity enhancement increases with decreasing zero-field viscosity and decreasing conductivity of oils. In the limit of zero shear rate, the oils with low conductivity behave as solids with yield stress. When a very small quantity of fine particles is introduced into electrified oils without shear, a rapid and large-scale motion of particles is observed between the tips of fibers and the plate electrode. The local motion of fluids in high electric fields is referred to as electrohydrodynamic (EHD) convection. Periodic patterns of circulation flow are formed in static oils. The electric energy which is dissipated during the circulation motion contributes to holding the periodic flow in static oils. When the stress is very low, the periodic patterns are not broken down. The yield stress corresponds to the force required to rupture the domain structures of EHD convection. In shear fields, the additional energy may be required to change the periodic patterns of EHD convection. The striking increase of viscosity in steady shear can be attributed to the interactions between EHD convection and external shear. Received: 31 August 1998 Accepted: 17 February 1999     

Rheology and UV protection properties of suspensions of fine titanium dioxides in a silicone oil

Ultrafine particles of titanium dioxide (TiO2) are very attractive as a UV protection ingredient in cosmetic products. The UV-scattering behavior of TiO2 suspensions in a silicone oil are studied in relation to rheological properties. To control the dispersion stability of suspensions, two types of polyether-modified silicones are used as dispersants. When the suspensions are prepared with branch-type dispersants in which the polyether groups are incorporated as side chains along the backbone, the flow is shear-thinning even at low shear rates. The appearance of plateaus in the frequency-dependence curves of storage modulus implies the solidlike responses. On the other hand, the suspensions prepared with linear conformation dispersants, in which the silicone group and polyether group are alternately repeated in one long chain, are Newtonian at low shear rates. The suspensions are regarded as liquids, because the storage modulus decreases rapidly in the low-frequency region. The suspension rheology is strongly associated with flocculated structures that are primarily controlled by the interparticle attractions. The differences in rheological behavior can be explained by the differences in the adsorbed conformation of dispersant silicones. From optical measurements, it is confirmed that UV scattering increases with decreasing flocculation degree. Therefore, good agreement is established between rheological properties and UV protection ability.     

Protein adsorption and wetting of the protein adsorbed surfaces studied by a new type of laser reflectometer

We have devised a new type of laser reflectometer that can measure adsorption behavior of (bio)-polymers, such as proteins, on the substrate surface and also the wetting for the surface of adsorbed layer of such (bio)-polymers. The adsorption and the wetting experiments can be conducted in a sequential manner using the same sample by this apparatus. So, the wetting of the surface of protein-adsorbed layer can be measured in virtually intact state. The reflectometry is based on the traditional optical polarimetry and the wetting measurement is due to the dropping time method (DTM) that has been reported before by the authors. The two methods are combined in an apparatus and hence we can correlate the wetting of protein layer adsorbed on the substrate surfaces with the amounts of protein molecules on the surface. As a model case we demonstrate the adsorption of several typical water soluble globular proteins on stainless steel surfaces. For this combination of the adsorbent with adsorbates, it is found that the water wetting of the protein adsorbed surface is closely related with the adsorbed amounts of proteins not depending on species.     

Changes in electrochemical and optical properties of oligoalkylthiophene film induced by bipolaron formation

An unusual electrochemical response is found for oligoalkylthiophene (13T) films in acetonitrile. A pristine 13T film exhibits a stable redox wave in cyclic voltammogram when the anodic potential limit is below 0.6 V, whereas the redox peaks shift clearly to the negative side by ca. 0.1 V once the 13T film experiences a potential beyond 0.7 V. After this electrochemical stimulus is imposed on a pristine 13T film, the absorption and emission spectra change their features. These findings, along with the measurements with varying thicknesses of 13T films, suggest that a pristine 13T film is a mixture of two phases to be oxidized at separate potentials and that one phase can be switched to the other by the potential stimulation. A plausible model proposed for explaining these observations assumes that a key parameter characteristic of the two phases is a conformation of 13T molecules in the solid state and a change in conformation, leading to the shift of the redox potentials and the change of optical properties, is induced by electrochemical generation of bipolarons on the half units of the oligomers in the pristine 13T film.     

Synthetic studies on (+)-ophiobolin A: asymmetric synthesis of the spirocyclic CD-ring moiety

[reaction; see text] Asymmetric synthesis of the spirocyclic CD-ring moiety of (+)-ophiobolin A is described. Fragment A, which was prepared via pig liver esterase (PLE)-mediated kinetic resolution, and fragment B, which was prepared via diastereoselective allylation and subsequent kinetic iodolactonization, were coupled to afford the allylsilane 2, which was successfully cyclized to the desired spirocyclic CD-ring moiety 1a in the presence of a Lewis acid.     

Highly Enantioselective Catalytic Asymmetric [2+2] Cycloadditions of Cyclic α‐Alkylidene β‐Oxo Imides with Ynamides

Highly enantioselective catalytic asymmetric [2+2] cycloadditions of cyclic α‐alkylidene β‐oxo imides with ynamides are described. The high reactivity of the cyclic α‐alkylidene β‐oxo imide allows the [2+2] cycloadditions of a hindered substrate with unreactive ynamides at low temperature. The X‐ray crystallographic analysis of the product suggests that the enantioselectivity of the [2+2] cycloaddition can be well explained by the chelate model comprising the intramolecular hydrogen bond, wherein the cyclic α‐alkylidene β‐oxo imide coordinates with Cu^II through the two imide carbonyls. The imide group in the product can be transformed to amide, nitrile, and ester groups; moreover, it is removable.     

Crystal transition from hydrated chitosan and chitosan/monocarboxylic acid complex to anhydrous chitosan investigated by X‐ray diffraction

We have studied the crystal transition behaviors from hydrated chitosan to anhydrous chitosan by X‐ray diffraction analyses. Hydrated chitosan prepared by deacetylation of crustacean α‐chitin was subjected to the two conversion methods, hydrothermal treatment and high‐humidity treatment via chitosan/monocarboxylic acid complex. The transition by hydrothermal treatment progressed with increasing treatment temperature and time, and the rapid transition occurred above 200 °C. Chitosan/acetic acid complex and chitosan/formic acid complex were prepared by immersing hydrated chitosan in acid solution. The transition from chitosan/acetic acid complex to anhydrous chitosan in high relative humidity condition proceeded with increasing temperature and was complete at 80 °C for 1 h, whereas chitosan/formic acid complex did not convert to anhydrous chitosan under the same conditions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1065–1069