SEC–MALLS analysis of cellulose using LiCl/1,3-dimethyl-2-imidazolidinone as an eluent

The lithium chloride/1,3-dimethyl-2-imidazolidinone (LiCl/DMI) solvent system for cellulose was adopted as a mobile phase of size-exclusion chromatographic (SEC) analysis of cellulose, and the applicability of this system was examined using multi-angle laser light scattering and ¹³C-NMR analysis. The results indicate that 8% (w/v) LiCl/DMI ID a true solvent for cellulose, and that cellulose molecules dissolving ID 1% (w/v) LiCl/DMI are separated orderly depending on their molecular mass (MM) or root-mean-square (RMS) radius by the SEC system. Practically, no aggregates were detected ID the dilute cellulose/LiCl/DMI solutions. Furthermore, high stability of cellulose/LiCl/DMI solutions has been demonstrated; only a few percent of decline ID average MM was observed even after storage for 6 months at room temperature. Relationships between RMS radius and MM for hardwood bleached kraft pulp ID 1% LiCl/DMI was estimated as the following equation: _g^0.59, corresponding to a Mark–Houwink–Sakurada exponent of 0.77.     

A study of molecular vibrational relaxation mechanism in condensed phase based upon mixed quantum-classical molecular dynamics. I. A test of IBC model for the relaxation of a nonpolar solute in nonpolar solvent at high density

In order to investigate vibrational relaxation mechanism in condensed phase, a series of mixed quantum-classical molecular dynamics calculations have been executed for nonpolar solute in nonpolar solvent and polar solute in polar solvent. In the first paper (Paper I), relaxation mechanism of I2 in Ar, where Lennard-Jones force is predominant in the interaction, is investigated as a function of density and temperature, focusing our attention on the isolated binary collision (IBC) model. The model was originally established for the relaxation in gas phase. A key question, here, is "can we apply the IBC model to the relaxation in the high-density fluid?" Analyzing the trajectory of solvent molecule as well as its interaction with the solute, we found that collisions between them may be defined clearly even in the high-density fluid. Change of the survival probability of the vibrationally first excited state on collision was traced. The change caused by collisions with a particular solvent molecule was also traced together with the interaction between them. Each collision makes a contribution to the relaxation by a stepwise change in the probability. The analysis clearly shows that the relaxation is caused by collisions even in the high-density fluid. The difference between stepwise relaxation and the continuous one found for the total relaxation in the low-density fluid and in the high-density one, respectively, was clarified to come from just the difference in frequency of the collision. The stronger the intensity of the collision is, the greater the relaxation caused by the collision is. Further, the shorter the collision time is, the greater the resultant relaxation is. The discussion is followed by the succeeding paper (Paper II), where we report that molecular mechanism of the relaxation of a polar molecule in supercritical water is significantly different from that assumed in the IBC model despite that the density dependence of the relaxation rate showed a linear correlation with the local density of water around the solute, the linear correlation being apparently in good accordance with the IBC model. The puzzle will be solved in Paper II.     

Photocrosslinking of poly(2,3-epithiopropyl methacrylate) by the oxidation of pendant episulfide groups

In the photocrosslinking of poly(2,3-epithiopropyl methacrylate) (PETMA) films the effect of the pendant episulfide group's oxidation on the crosslinking of PETMA was investigated. Thermal crosslinking of PETMA is promoted by peroxides such as benzoyl peroxide and hydrogen peroxide. IR spectrum of the crosslinked PETMA showed that the reaction proceeded through the oxidation of episulfide groups by the peroxides. The anthracene (An) sensitized photocrosslinking of PETMA films also proceeded via the oxidation of episulfide groups by singlet oxygen. It was found that residual tetrahydrofuran (THF) in the films remarkably increased the rate of the photocrosslinking and/or reduced the induction period. From the further investigation concerning casting solvents it was found that residual CS₂, CCl₄, and CHCl₃ in films increased the rate of the photocrosslinking and/or reduced the induction period of the photocrosslinking. The disappearance rate of An in the films was also increased by the presence of residual CS₂, CCl₄, and CHCl₃, differring from the result of THF. These results were explained by a difference in lifetime of singlet oxygen in the films. From the results were explained by a difference in lifetime of singlet oxygen in the films. From the results concerning the effects of hydroperoxides such as THF hydroperoxide and t-butyl hydroperoxide on the photocrosslinking of PETMA films the acceleration effect of the residual THF was deduced to be due to the promotion of singlet oxygen-oxidation of sulfide groups by protic compounds such as THF hydroperoxide and H₂O in the THF.     

Preparation of polysiloxanes from silicic acid. III. Preparation and properties of polysilicic acid butyl esters

Polysilicic acid butyl esters were prepared from 1-butanol and silicic acid extracted from sodium metasilicate solution and water glass with tetrahydrofuran and hydrochloric acid. The properties of the esters were dependent on the degree of esterification (DE). The esters with a DE of less than ca. 60% could be isolated by precipitation with hexane and were highly liable to self-condensation, whereas those with more than 60% DE were soluble in solvents and could not be precipitated easily. They underwent further condensation to form highly polymerized esters. Subsequent silylation allowed the isolation and characterization of these esters. The solvent-soluble silylated esters had moderate thermal stability with decomposition points between 210 and 260°C and number-average molecular weights of 10,000–30,000. From the evaluation of units structures of silylate it was suggested that polymer backbone was a pseudoladder structure.     

Novel assembly of cyclic ethers by coupling alpha-chlorosulfides and alcohols

A novel protocol for assembling polycyclic ethers was developed and successfully applied to the synthesis of the EFGH ring system of ciguatoxin CTX3C. A key transformation involves construction of an O,S-acetal through coupling of alpha-chlorosulfide and a secondary alcohol under mild conditions. The method is highly applicable to use with sensitive substrates and will enable the synthesis of various natural and artificial polycyclic ethers. [reaction: see text]     

One-step analysis of testis steroidogenesis from neonatal exposure to synthetic estrogen by normal-phase HPLC

Neonatal exposure to synthetic estrogen endocrine disruptors or estrogen-receptor inhibitors induces developmental abnormalities in the male reproductive system. To investigate whether neonatal exposure affects spermatogenesis in juvenile and pubertal testis, Sprague-Dawley rat pups were given synthetic estrogen endocrine disruptors or estrogen-receptor inhibitors by a single injection on the day of birth at concentrations ranging between 2 to 40 mm, and sacrificed on day 21 (juvenile), 35 (prepuberty) or 50 (puberty). The testes were weighed and examined histologically at each stage. Further, the metabolites of steroidogenesis were analyzed using normal-phase high performance liquid chromatography. Neonatal exposure significantly reduced testis weights and steroidogenesis to one- fifth to one-half of that of the juvenile control, and further suppressed irreversible steroidogenesis and spermatogenesis during puberty.     

Syntheses and Characterization of Polymetallosiloxanes from Silicic Acid and Metal Chlorides

Syntheses and characterization of polymetallosiloxanes by the non-hydrolysis sol-gel process using no metal alkoxides were investigated. The reaction of silicic acid (SA) with MCl₄ (M = Ti, Zr) in the molar ratios SA/MCl₄ = 0.5–3.0 using a tetrahydrofuran-methanol solvent formed polymetallosiloxane (PMS), which was insoluble in organic solvents regardless of the molar ratio. The PMS was isolated as esterified polymetallosiloxane by esterification with isopropyl alcohol for various periods, which were soluble in methanol, acetone, and tetrahydrofuran. The number average molecular weight was 1000–3200 for esterified polytitanosiloxane and 3400–11000 for esterified polyzirconosiloxane. Esterified polymetallosiloxanes had no melting point but decomposition point. The results of analytical data indicated that esterified polymetallosiloxane and/or polymetallosiloxane consisted of the main chain of Si–O–Si and Si–O–M linkage with the pendants of alkoxy, silanol, and chloro group.     

Chemical synthesis of cyclodextrins by using intramolecular glycosylation

An efficient synthesis of cyclodextrins (CDs) by using the intramolecular glycosylation is demonstrated. alpha-CD, an alpha(1-->4)linked hexaglucoside, was prepared via a block condensation of three maltose units. A modified key maltose intermediate as a precursor to both glycosyl donor and acceptor components was prepared in 6 steps starting from maltose. All the glycosylation for chain elongation and cyclization of saccharides was carried out after tethering the donor to the acceptor by the phthaloyl bridge to give the desired saccharides in good yields with complete alpha-selectivity. delta-CD composed of 9 glucose units was synthesized by the same manner from three maltotriose units.