Induced chiral helical effect on the main chain of aliphatic polyacetylenes

11‐Dodecyn‐1‐ol as an achiral, aliphatic, monosubstituted acetylene was copolymerized with cholesteryl 3‐butynyl carbonate as a chiral, aliphatic, monosubstituted acetylene with Rh(nbd)[B(C₆H₅)₄] (nbd = norbornadiene) in tetrahydrofuran. The main chain of the obtained copolymers seemed to be mainly composed of the cis‐type structure. The backbone π–π* transition of these copolymers showed significant circular dichroism (CD), indicating an excess of one‐handed helical conformation. These CD signals were varied with the contents of the cholesteryl units in the copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 913–917, 2001     

Diethylhydrogensilyl cyclic diethylsilylene derivatives in gas chromatography/mass spectrometry of hydroxylated steroids. III-Fragmentations of 5β-pregnane-17,20,21-triol derivatives

A reaction of N,O-bis-(diethylhydrogensilyl) trifluoroacetamide with 5β-pregnane-17,20,21-triols afforded diethylhydrogensilyl (DEHS) cyclic diethylsilylene (DES) derivatives. 5β-Pregnane-3α,17α,20β,21-tetraol yielded the 3α,21-bis-DEHS-17α,20β-DES compound, whereas the structure of the major product from its 20α isomer was assigned as the 3α,17α-bis-DEHS-20α,21-DES derivative, which would undergo facile isomerization to the unstable 3α,21-bis-DEHS-17α,20α-DES structure under electron ionization. Fragmentations of these DEHS-DES compounds are discussed on the basis of isotope labelling experiments, linked scanning data, and accurate mass measurements.     

Desymmetric hydrogenation of a meso-cyclic acid anhydride toward biotin synthesis

Catalytic reactivity in the hydrogenation of a cyclic anhydride to a biotin synthetic intermediate has been investigated on the basis of Lyons’ original method using Wilkinson Ru complex, revealing the high performance of DPPF and XANTPHOS diphosphines possessing wide bite angles. The results have shown a new trail for design of the corresponding asymmetric catalysts, and the potential utility of (S,S)-Et-FerroTANE and (S,S)-(R,R)-Ph-TRAP has been demonstrated.     

Molecular Spintronics Based on Single‐Molecule Magnets Composed of Multiple‐Decker Phthalocyaninato Terbium(III) Complex

Unlike electronics, which is based on the freedom of the charge of an electron whose memory is volatile, spintronics is based on the freedom of the charge, spin, and orbital of an electron whose memory is non‐volatile. Although in most GMR, TMR, and CMR systems, bulk or classical magnets that are composed of transition metals are used, this Focus Review considers the growing use of single‐molecule magnets (SMMs) that are composed of multinuclear metal complexes and nanosized magnets, which exhibit slow magnetic‐relaxation processes and quantum tunneling. Molecular spintronics, which combines spintronics and molecular electronics, is an emerging field of research. Using molecules is advantageous because their electronic and magnetic properties can be manipulated under specific conditions. Herein, recent developments in [LnPc]‐based multiple‐decker SMMs on surfaces for molecular spintronic devices are presented. First, we discuss the strategies for preparing single‐molecular‐memory devices by using SMMs. Next, we focus on the switching of the Kondo signal of [LnPc]‐based multiple‐decker SMMs that are adsorbed onto surfaces, their characterization by using STM and STS, and the relationship between the molecular structure, the electronic structure, and the Kondo resonance of [TbPc₂]. Finally, the field‐effect‐transistor (FET) properties of surface‐adsorbed [LnPc₂] and [Ln₂Pc₃] cast films are reported, which is the first step towards controlling SMMs through their spins for applications in single‐molecular memory and spintronics devices.     

UV dose measurements of photosensitive dermatosis patients by polycrystalline GaN-based portable self-data-acquisition UV monitors

We have developed a UV monitor with polycrystalline (poly-) gallium nitride (GaN) UV sensors and evaluated its performance from the viewpoint of its effectiveness for use with photosensitive dermatosis patients. The poly-GaN UV sensor is sensitive to UV light from 280 to 410 nm even without optical filters. The UV monitor is a portable self-data-acquisition instrument with a minimum detection level (defined as average UV intensity over 290 to 400 nm) of 2 microW/cm2 and can store UV dose data for 128 days. It allows easy measurement of four orders of magnitude of ambient UV intensity and dose from indoor light to direct solar radiation in summer. Trial use of the UV monitor by five xeroderma pigmentosum patients started in June 2000 and was carried out for 1 year. It was demonstrated that the UV monitor was useful in improving their quality of life.     

Novel family of low molecular weight hydrogelators based on L-lysine derivatives

New L-lysine derivatives with a positively charged terminal can gel water below 1 wt%; particularly, 1a and 2a form a hydrogel at 0.3 wt% corresponding to approximately 12,300 and 12,500 waters/gelator molecule, respectively.     

Photocatalytic Activity and Photo-Induced Wettability Conversion of TiO2 Thin Film Prepared by Sol-Gel Process on a Soda-Lime Glass

We have developed the transparent photoactive TiO₂ thin film coated on soda lime glass (SLG) by sol-gel process. Titanium dioxide thin films coated on SLG exhibit lower photocatalytic activity due to the thermal diffusion of Na ion from the SLG substrate. Thin SiO₂ film precoating is very effective to prevent the thermal diffusion of Na ion. We have evaluated the photocatalytic decomposition of gaseous acetaldehyde and the photo-induced surface wettability of TiO₂ films with and without SiO₂ precoating layer. As expected, the TiO₂ film on SiO₂/SLG is more photoactive to decompose acetaldehyde than that on SLG. However, as for wettability conversion, there was little difference in the conversion rate between TiO₂ film without SiO₂, and TiO₂ film with SiO₂. Different dependence of Na ion diffusion on two kinds of photo-induced reaction on TiO₂ is discussed based on the difference of the photo-induced reaction mechanism.     

Preparation and Characterization of Highly Proton-Conductive Composites Composed of Phosphoric Acid-Doped Silica Gel and Styrene-Ethylene-Butylene-Styrene Elastomer

Highly proton-conductive elastic composites have been successfully prepared from H₃PO₄-doped silica gel and a styrene-ethylene-butylene-styrene (SEBS) block elastic copolymer. Ionic conductivities of the composites depended on the concentration of H₃PO₄ and the heat treatment temperature of the H₃PO₄-doped silica gel. It was found that H₃PO₄ added is present mainly as free orthophosphoric acid in the silica gel. The composite composed of H₃PO₄-doped silica gel with a molar ratio of H₃PO₄/SiO₂ = 0.5 heat-treated at temperatures below 200°C and SEBS elastomer in 5 mass% showed a high conductivity of 10^–5 S cm^–1 at 25°C in an dry N₂ atmosphere. The water adsorption during a storage in 25% relative humidity at room temperature for 1 day enhanced the ionic conductivities of composites by about one order of magnitude. Lower conductivities obtained in the composite with the H₃PO₄-doped silica gel heat-treated at 250°C for 1 h were due to the formation of crystalline Si₃(PO₄)₄. The temperature dependence of conductivity of the composites was the Vogel-Tamman-Fulcher type, indicating that proton was transferred through a liquidlike phase formed in micropores of the H₃PO₄-doped silica gels. The temperature dependence of the modulus of the composite was similar to that of the SEBS elastomer. The thermoplastically deforming temperature of the composite was around 100°C, which was higher by 30°C than that of the SEBS elastomer.     

Synthesis and properties of polyfluoro(silyl)acetylene nanoparticles by reaction of fluoro(silyl)acetylenes with triethylamine

Fluoro(silyl)acetylenes, which were prepared by reaction of 1,1-difluoroethylene with silyl chlorides, reacted with triethylamine to give dark-brown colored polyfluoro(silyl)acetylene powders in excellent to moderate isolated yields. In contrast, the corresponding nonfluorinated acetylene was unable to react with triethylamine at all to afford poly(silyl)acetylene under similar conditions. Polyfluoro(silyl)acetylenes thus obtained were nanometer size-controlled cubic fine particles with a good dispersibility and stability in a variety of solvents. These polyfluoro(silyl)acetylene nanoparticles exhibited clear absorption and emission spectra related to the conjugated units in polymer main chain. Furthermore, these polyfluoro(silyl)acetylene nanoparticles were applied to the surface modification of poly(methyl methacrylate) [PMMA] film to exhibit a higher oleophobicity imparted by fluorine on their surface, compared to that on the reverse side.