A highly regio- and stereoselective synthesis of internal olefins via an elimination of trimethylstannyl group

Internal reaction of secondary alkyltin(IV) compounds having thionium ion gave internal trans olefins with high yield and regio- and stereoselectivity via 1,5- or 1,6-transfer of a hydride β to the trialkylstannyl group.     

Fluorination of 2-alkyl-substituted oxanes. The synthesis and purification of perfluoro(2-alkyl-substituted oxane)s

Five kinds of 2-alkyl-substituted oxanes like 2-ethyloxane, 2-n-propyloxane, 2-iso-propyloxane, 2-n-butyloxane and 2-n-amyloxane were fluorinated electrochemically to give the corresponding perfluoro(2-alkyloxane)s. The perfluoro(2-alkyloxane)s were obtained in good yields from these starting materials together with isomeric perfluoro(2-alkyloxolane)s, perfluoro(2-alkyl-5-methyloxolane)s and perfluoro(dialkyl ether)s. The purification of the perfluoro(2-alkyloxane)s which contained small amounts of isomeric perfluoro(2-alkyloxolane)s was successfully achieved by recovering the former unreacted after treating these mixture with anhydrous aluminum chloride at 150 /sR 160 °C during /sR 48 hrs in order to convert the latter into the easy-separable perfluoro(2,5,5- trichloro-2-alkyloxolane)s. Small quantities of new perfluoro(5,5-dichloroalkanoyl chloride)s were also among the chlorination products. The spectroscopic data as well as the physical properties of these new fluorination products, and perfluoro(2,5,5-trichloro-2-alkyloxolane)s and perfluoro(5,5-dichloroalkanoyl chloride)s are presented.     

Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction

Inorganic-organic hybrid gels were prepared by simultaneous condensation of the liquid mixture of ethyl silicate, ethyl borate and water soluble phenol resin with low molecular weight. The liquid mixtures were changed into lightly colored transparent gels after a catalyst addition and stirring. The obtained gels were crushed, dried and fired in controlled conditions to yield the inorganic precursors. Since the tailored inorganic precursors mainly consisted of SiO2 and carbon, silicon carbide was formed with the heat treatments in an Ar atmosphere beyond 1773 K with carbothermic reduction. The properties and morphology of the formed silicon carbide powders in terms of the starting precursor compositions and the conditions of the carbothermic reduction were investigated with SEM, XRD and TG-DTA analysis.     

Synthetic studies on selective type 4 phosphodiesterase (PDE 4) inhibitors. 1. Structure-activity relationships and pharmacological evaluation of 1,8-naphthyridin-2(1H)-one derivatives

In order to develop novel and orally active phosphodiesterase (PDE) 4 inhibitors, random screening was performed using our chemical library to find YM-10335 possessing the 1,8-naphthyridin-2(1H)-one skeleton which is a completely different structure from rolipram. In this report, the syntheses and structure-activity relationships of the YM-10335 derivatives were described. Some compounds showed selective inhibitory activities for PDE 4 derived from human peripheral blood cells and no effect on the other PDE types (1, 2, 3, 5). The inhibition of the tumor necrosis factor-alpha (TNF-alpha) release in vitro and the carrageenan-induced pleurisy in rats were also described.     

Heterometallic hexanuclear cluster with an S = 8 spin ground state: MnII[MnII(hfac)2]3[NiII(pao)3]2 (hfac- = hexafluoroacetylacetonate,pao- = pyridine-2-aldoximate)

The heterometallic Mn(II)(4)Ni(II)(2) title compound has been synthesized and characterized by X-ray crystallography. The compound consists of a Ni-Mn-Ni linear moiety, [[Ni-(mu-NO)(3)](2)-Mn], linked by oximate bridges and three Mn(II) hfac terminal units attached by oximate oxygens in a di-mu-oxo fashion, forming a novel heterometallic cluster: Mn[Mn(hfac)(2)](3)[Ni(pao)(3)](2) (1). Magnetic measurements reveal the antiferromagnetic nature of the oximate pathway between Mn(II) and Ni(II) metal ions, which imposes an unusual high-spin ground state (S = 8) for 1.     

Stability of a novel hexapeptide, (Me)Arg-Lys-Pro-Trp-tert-Leu-Leu-OEt, with neurotensin activity, in aqueous solution and in the solid state

The stability and some physicochemical properties of a novel hexapeptide, (Me)Arg-Lys-Pro-Trp-tert-Leu-Leu-OEt (I), with neurotensin activity, were investigated. The degradation of I in aqueous solution was observed as a pseudo-first order reaction. By determining the degradation rate of I at various pH values, it was found that I was most stable at around pH 4. The activation energies of the degradation in aqueous solutions at pH 2.2, 6.1, 7.0 and 8.0 were 16.3, 22.2, 23.9 and 24.2 kcal/mol, respectively. The enzymatic hydrolysis of I was studied in vitro with a porcine liver esterase at 37 degrees C. The degradation of I in this system was observed as a pseudo-first order reaction. The degradation rate of I in the presence of the esterase was about 10000 times larger than the rate in a buffer solution. I in the solid state was stable under 65 degrees C and labilized by strong light and/or high humidity. The pKa1, pKa2 and pKa3 of I were 7.1, 10.0 and 11.3, respectively. The partition coefficients between n-octanol and the buffer solution at pH values ranging from 2 to 11 were measured. The partition coefficient increased with the increase of the pH value. But the value at pH 7.0 was 2.10 x 10(-2), which was very low. The solubility of I in aqueous solution was more than 10 mg/ml. From the results of the powder X-ray diffraction pattern, I in the solid state was found to be amorphous. The dissolution rates in the 1st and 2nd fluid of JPXI at 37 degrees C and 100 rpm were 19.4 and 9.0 mg/cm2.min, respectively.     

Rhodium-catalyzed addition of arylboron compounds to nitriles, ketones, and imines

The rhodium-catalyzed addition reactions of sodium tetraphenylborate and arylboronic acids to nitriles, ketones, and imines were examined. The reaction of nitriles could be carried out efficiently in the presence of a catalyst system of [RhCl(cod)]₂-dppp and H₂O to give the corresponding monoarylated products selectively. Although unactivated ketones and imines are known to be poor electrophiles for rhodium-catalyzed arylation, the phenylation of them with use of sodium tetraphenylborate proceeded smoothly in the presence of [RhCl(cod)]₂ and Rh(acac)(cod) as catalysts, respectively. The addition of NH₄Cl was found to be crucial to effectively conduct the reaction of ketones and imines.     

Regioselective conjugate addition of sulfonylallyl carbanions to α, β-unsaturated ketones

Ambident lithium carbanions of allyl phenyl sulfones add 1,4-α to both acyclic and cyclic enones exclusively if HMPA is present in the medium; in contrast, 1,2-α addition to cyclic enone is the major kinetic course in the absence of HMPA, which is followed by rearrangement to the 1,4-γ adduct.     

Contrasteric stereochemical dictation of the cyclobutene ring-opening reaction by a vacant boron p orbital

Cyclobutene, having a pinacolatoboryl group at the 3-position, was prepared by the reaction of trimethyl borate with a cyclobutenyl anion, which was generated by reductive lithiation of 3-(phenylselenyl)cyclobutene. Its thermal ring-opening reaction provided (Z)-1-borylbuta-1,3-diene selectively despite the arising steric congestion. The contrasteric behavior was accounted for by assuming an electron-accepting interaction of the vacant boron p orbital with the distorted breaking sigma orbital in the inward transition state.     

Size distribution and characteristics of chemical components in ambient particulate matter.

Ambient particulate matter and gas in Kyoto were investigated by gravimetric analysis, X-ray fluorescence spectrometry, and ion chromatography in order to clarify their behavior and origin. The size distribution and characteristics of the chemical components in ambient particulates collected on PTFE membrane filters using an Andersen air sampler were examined from August 2001 to April 2004. A four-stage filter pack method was used to sample the atmosphere for the determination of gas (SO2, HNO3, HCl, NH3) and particulate matter (SO42, NO3, Cl-, Na+, K+, Ca2+, Mg2+, NH4+) concentrations from October 2002 to April 2004. The concentration of SPM mass was in the range of 6.7 - 80.2 microg/m3. The size distributions of SPM mass were bimodal, peaking at around 0.65 - 1.1 and 3.3 - 4.7 microm, and 40 - 85% of SPM mass was fine particles (< 2.1 microm). Na, Mg, Al, Si, Ca, Cl, and Fe were mainly present in coarse particles (2.1 to 11.0 microm), while S was present in fine particles. The concentrations of Al, Si, Ca, Mg, and Fe in fine particles increased from March to April in 2002, and those in coarse particulates increased in November 2002 and from March to April in 2004. This may be the effect of the continental yellow sand "Kosa." The differences in the size distributions of Al, Si, Ca, Mg, and Fe in particles may depend on differences in their place of occurrence and course of transport from China to Japan. The concentration of HCl gas was higher than that of particulate chloride ion in summer. Nitric acid gas existed at higher concentrations in summer, but fine particulate nitrate ion was observed in winter. The gaseous-to-fine aerosol nitrate fraction became higher at warmer temperatures. Coarse sulfate was below 10%, and SO2 gas and fine particulate sulfate were above 90%.