Continuous separation of particles using a microfluidic device equipped with flow rate control valves

We propose herein an improved microfluidic system for continuous and precise particle separation. We have previously proposed a method for particle separation called "pinched flow fractionation." Using the previously reported method, particles can be continuously separated according to differences in their diameters, simply by introducing liquid flows with and without particles into a specific microchannel structure. In this study, we incorporated PDMS membrane microvalves for flow rate control into the microfluidic device to improve the separation accuracy. By adjusting the flow rates distributed to each outlet, target particles could be precisely collected from the desired outlet. We succeeded in separating micron and submicron-size polymer particles. This method can be used widely for continuous and precise separation of various kinds of particles, and can function as an important part of microfluidic systems.     

Low-melting zwitterion: effect of oxyethylene units on thermal properties and conductivity

An imidazolium-based zwitterion containing two oxyethylene units was obtained as a colorless liquid at room temperature. The equimolar mixture of the liquid zwitterion and lithium bis(trifluoromethylsulfonyl)amide showed an ionic conductivity of over 10(-4) S cm(-1) at 80 °C, which was higher than those of mixtures composed of analogous solid zwitterions.     

Photoinduced ionic polymerization. III. Cationic polymerization and copolymerization of cyclohexene oxide and α-methylstyrene in the presence of pyromellitic dianhydride

The photoinduced ionic polymerization of cyclohexene oxide was studied in the presence of pyromellitic dianhydride. The polymerization is initiated by the excited chargetransfer complex between cyclohexene oxide and the electron-acceptor and proceeds by a cationic mechanism. Photoinduced cationic polymerization of α-methylstyrene was also observed in the presence of pyromellitic dianhydride. The initiation mechanism of the polymerization was elucidated by means of electron spin resonance measurements. The concentration of pyromellitic dianhydride anion-radicals measured in this way was found to be proportional to the rate of polymerization. This result shows clearly that the photopolymerization is initiated by cation-radicals formed from photoexcited donoracceptor complexes. The attempted photocopolymerization of cyclohexene oxide and α-methylstyrene gave a mixture of homopolymers. The composition of the product depends on the wavelength of the light used.     

Optimized conditions for high-performance liquid chromatography analysis of oligosaccharides using 7-amino-4-methylcoumarin as a reductive amination reagent

Reductive amination reaction using 7-amino-4-methylcoumarin (AMC) as a fluorescent probe enabled analyses of glycoproteins' monosaccharides and N-linked oligosaccharides. Reductive amination of N-acetylhexosamines and AMC using sodium cyanoborohydride or dimethylamine-borane complex indicated slight recovery of derivatives, but pyridine-borane achieved better recoveries. Reversed-phase high-performance liquid chromatography (HPLC) analyses of monosaccharides constituting glycoprotein glycans using fluorimetric detection revealed linearity for 0.2fmol to 1pmol, with less than 5% RSD quantitation reproducibility. Reversed-phase HPLC analyses of glycoprotein glycans, combined with negative-ion electrospray ionization mass spectrometry (LC-ESI-MS), enabled their structural determination. Using this highly hydrophobic reagent, AMC-labeled oligosaccharides displayed one-order to two-order higher ESI-MS intensity than derivatives labeled using other reagents.     

Ring expansion of isopropenyldihydrofuran derivatives

Lactonization of 2‐(hydroxymethyl)‐5‐isopropenyl‐4,5‐dihydrofuran‐3‐carboxylic acids 1a,b,c with dicyclohexylcarbodiimide gave the corresponding furano‐lactones, 5‐isopropenyl‐5,6‐dihydro‐1(3H)‐furo[3,4‐b]furanone 2a,b,c , which were readily converted to the corresponding oxepino‐lactones, 6‐methyl‐5,8‐dihydro‐1(3H)‐furo[3,4‐b]oxepinone 3a,b,c by respective thermal ring expansions.     

One-pot synthesis of optically active allyl esters via lipase-vanadium combo catalysis

The combination of vanadium-oxo compounds (3 or 4) with a lipase produced the regio- and enantioconvergent transformation of racemic allyl alcohols (1 or 2) into optically active allyl esters. In this system, the vanadium compounds catalyzed the continuous racemization of the alcohols along with the transposition of the hydroxyl group, while the lipase effected the chemo- and enantioselective esterification to achieve the dynamic kinetic resolution.     

Direct observation of adduct formation of alkyl and aromatic iodides with cl atoms using cavity ring-down spectroscopy

The reactions of Cl atoms with RI (R = n-C3H7, n-C4H9, cyclo-C6H11, C6H5, C6F5, and p-CH3C6H4) have been studied using cavity ring-down spectroscopy at a temperature range of 233-313 K and at 100 Torr total pressure of N2 diluent. Visible absorption spectra of the RI-Cl adducts were recorded at 440-520 nm at 263 K. The yields of the adducts were temperature-dependent. There was no discernible reaction of the adducts in the presence of 100 Torr of O2 at 263 K. Theoretical calculations were performed for C4H9I-Cl and C6H5I-Cl for quantitative explanation of the absorption spectra and the strength of the I-Cl bonds in the charge-transfer complexes. Evidence for the adduct formation following the reaction of Cl with C6H5Br was sought but not found at 440 and 520 nm.     

How Is the Local-scale Gravitational Instability Influenced by the Surrounding Large-scale Structure Formation?

We develop the formalism to investigate therelation between the evolution of the large-scale(quasi) linear structure and that of the small-scalenonlinear structure in Newtonian cosmology within theLagrangian framework. In doing so, we first derive thestandard Friedmann expansion law using the averagingprocedure over the present horizon scale. Then thelarge-scale (quasi) linear flow is defined by averaging the full trajectory field over a large-scaledomain, but much smaller then the horizon scale. Therest of the full trajectory field is supposed todescribe small-scale nonlinear dynamics. We obtain the evolution equations for the large-scale andsmall-scale part of the trajectory field. These arecoupled each other in most general situations. It isshown that if the shear deformation of fluid elements is ignored in the averaged large-scaledynamics, the small-scale dynamics is described byNewtonian dynamics in an effectiveFriedmann-Robertson-Walker (FRW) background with a localscale factor. The local scale factor is defined by the sum of theglobal scale factor and the expansion deformation of theaveraged large-scale displacement field. This means thatthe evolution of small-scale fluctuations is influenced by the surrounding large-scale structurethrough the modification of FRW scale factor. The effectmight play an important role in the structure formationscenario.     

An optical system for measuring the eccentricity of glass wool pipe — for industrial use

An optical system for measuring the eccentricity of the glass wool pipe has been developed for an industrial use. The system consists of a contact sensor, a photo light sensor and a signal processing system with a logic circuit. The system is simple, fast and efficient for practical use; it allows implementation of on-line process monitoring and alarm warning signals for unacceptable pipe eccentricity during manufacturing.     

Three Dimensional Laser Simulation Code on a Desktop Personal Computer

We present a new simulation code able to simulate the entire propagation of laser pulse, from the amplifiers level up to the focusing stage. This algorithm has some new characteristics that we intend to present. It computes the three-dimensional optical propagation equation using no approximation other than its picosecond expression. The stability has been carefully studied so that it can be applied to any geometry. This is a great improvement since, up to now only cylindrical geometry was accessible for accuracy. In this paper we also present a method using Fast Fourier Transform able to evaluate with a high accuracy, Fresnel’s distribution of a focused laser pulse. The advantages provided by our algorithm are its rapidity and its high physical understanding of the focusing phenomena.