Evaluation of immobilized-lysozyme by means of TOF-SIMS

Evaluation of immobilized-proteins on bio-devices is important for the development of sophisticated devices. Lysozyme molecules immobilized on substrates were evaluated by means of time-of-flight secondary ion mass spectrometry (TOF-SIMS). Two types of the lysozyme-immobilized samples were prepared by controlling the binding parts, i.e., the amino groups or carboxyl groups, of the protein. The TOF-SIMS spectra of each sample were analyzed with mutual information to select fragment ions specific to each sample. According to the results, differences between the samples being immobilized in the different ways are suggested, and the surface structure of the lysozyme molecule immobilized at amino groups is determined based on three-dimensional structure of lysozyme in the Protein Data Bank.     

Pressure loading of detonation waves through 90-degree bend in high pressure H2–O2–N2 mixtures

Detonation experiments are conducted to investigate the detonation wave behavior in steam pipelines of boiling water reactors. Accumulated gases in BWRs are stoichiometric hydrogen/oxygen mixtures diluted with steam at 7 MPa. In the experiment, flammable gas mixture diluted with nitrogen at room temperature and up to 5 MPa is used to achieve equivalent detonation condition. Two test pieces are used, one is straight tube and the other is 90-degree bend. No initial pressure dependency in detonation wave behavior is observed in the experiments. However, in the straight tube tests, detonation velocities higher than theoretical values are measured when the initial pressures are greater than 2.3 MPa. This result is considered as attribution of real gas effect. In the 90-degree bend experiments, pressure time histories reveal pressure loads greater than the straight tube portion at two locations. One is a high pressure peak at the extrados of the bend and the other is a double pressure peak just downstream of the bend outlet. Second pressure peak just downstream of the bend outlet is due to transverse wave propagation. Additionally, the largest impulse is observed not at the extrados of the bend but at the intrados of bend outlet. These results show the importance of more investigations on transverse wave behaviors in failure potential evaluation.     

Physico-chemical properties and possible photocatalytic applications of titanate nanotubes synthesized via hydrothermal method

Titanate nanotubes (TNTs) were prepared from TiO₂ P25 via hydrothermal method. The reaction temperature was 130 or 140 °C and the reaction time was 24 or 48 h. The samples were characterized by transmission electron microscopy, X-ray diffraction, thermogravimetry and N₂ adsorption as well as Raman, FTIR-DRS and UV-vis/DR spectroscopy. The obtained samples exhibited similar properties, regardless of the preparation temperature and time. The most notable difference between properties of TNTs prepared under different conditions was observed in case of BET surface area, which was increasing from 386 to 478 m²/g along with increasing the reaction time and temperature. Based on TEM, XRD and TG measurements we have suggested that the structure of TNTs was H₂Ti₂O₄(OH)₂. The TEM and Raman spectroscopy measurements showed that the obtained products contained also low amount of anatase phase. The TNTs exhibited no photoactivity towards degradation of model azo dye Acid Red 18. However, TNTs were successfully applied for photocatalytic generation of CH₄ and H₂ in a solution of acetic acid. The amount of methane produced with application of TNTs synthesized at 140 °C was about 2.5 times higher than that generated with use of TiO₂ P25. To the best of our knowledge this is a first report on the photocatalytic generation of hydrocarbons using TNTs in the current state of the art.     

Improved sound absorption performance of three-dimensional MPP space sound absorbers by filling with porous materials

Because microperforated panels (MPPs), which can be made from various materials, provide wide-band sound absorption, they are recognized as one of the next-generation absorption materials. Although MPPs are typically placed in front of rigid walls, MPP space sound absorbers without a backing structure, including three-dimensional cylindrical MPP space absorbers (CMSAs) and rectangular MPP space absorbers (RMSAs), are proposed to extend their design flexibility and easy-to-use properties. On the other hand, improving the absorption performance by filling the back cavity of typical MPP absorbers with porous materials has been shown theoretically, and three-dimensional MPP space absorbers should display similar improvements. Herein the effects of porous materials inserted into the cavities of CMSAs and RMSAs are experimentally investigated and a numerical prediction method using the two-dimensional boundary element method is proposed. Consequently, CMSAs and RMSAs with improved absorption performances are illustrated based on the experimental results, and the applicability of the proposed prediction method as a design tool is confirmed by comparing the experimental and numerical results.     

Fabrication and transport properties of multiwall carbon nanotube crossroads

A multiwall carbon nanotube crossroads has been fabricated by a manipulation technique using a glass microcapillary, and the low temperature transport properties investigated. The two-terminal conductance of an individual tube shows Tomonaga–Luttinger liquid behavior G∝T^α at high temperature and dI/dV ∝V ^α at low temperature. However, no evidence of such a power-law behavior is obtained in the four-terminal conductance at the junction, where the conductance shows an almost metallic behavior ‘corrected’ by weak localization. Weak localization would essentially appear in electron states at the junctions of MWNTs.     

Exceeding the classical capacity limit in a quantum optical channel

The amount of information transmissible through a communications channel is determined by the noise characteristics of the channel and by the quantities of available transmission resources. In classical information theory, the amount of transmissible information can be increased twice at most when the transmission resource is doubled for fixed noise characteristics. In quantum information theory, however, the amount of information transmitted can increase even more than twice. We present a proof-of-principle demonstration of this superadditivity of classical capacity of a quantum channel by using the ternary symmetric states of a single photon, and by event selection from a weak coherent light source. We also show how the superadditive coding gain, even in a small code length, can boost the communication performance of the conventional coding technique.     

Color Conversion Method for Multiprimary Display Using Matrix Switching

The range of reproducible color, i.e., color gamut, of conventional three-primary display devices is sometimes insufficient for reproducing the natural color of an object through color imaging systems. A multiprimary display is being developed for the purpose of reproducing an expanded color gamut using more than three primary colors. In this paper, a color conversion method is proposed to reproduce the natural color by additive mixture of multiprimary colors. The multiprimary color signal in this conversion method is calculated from the three-dimensional color coordinates CIE-XYZ, considering the dynamic range of each primary color. Divided into some linear elements from the polyhedral color solid of the multiprimary display, the conversion considering the constraint of the dynamic range can be performed by simple calculation without iterative calculation or a huge three-dimensional look up table. A fast computation method with a two-dimensional look-up-table is also presented. Using the proposed method, the result of the color reproduction is experimentally demonstrated by a six-primary projection display.     

Characterization of a laser-plasma extreme-ultraviolet source using a rotating cryogenic Xe target

A laser-plasma source for extreme-ultraviolet (EUV) light that uses a rotating cryogenic solid-state Xe target has been characterized. We focused on parameters at the wavelength of 13.5 nm with 2% bandwidth required for an EUV lithography source and investigated improvements of the conversion efficiency (CE). With the drum rotating, there was an increase in CE and less fast ions compared with the case for the drum at rest. It is considered that the Xe gas on the target surface can produce optimal-scale plasma, and satellite emission lines in Xe plasma effectively increase the EUV intensity, and the ion number is decreased by the gas curtain effect. The dependence of CE on the laser wavelength, laser energy and intensity also studied. As a result, the maximum CE was 0.9% at 13.5 nm with 2% bandwidth under the optimal condition. By continuous irradiation of a Nd:YAG slab laser at a repetition rate of 320 Hz and an average power of 110 W, the target continuously generated EUV light with an average power of 1 W at 13.5 nm with 2% bandwidth. The achieved performances provide valuable information for the design of a future EUV lithography source.     

Structural characteristics of polysaccharide-based thermotropic liquid crystals

Main mesomorphic properties of cellulose and cello- and chito-oligosaccharide derivatives are overviewed, and their structuring principles are briefly discussed with some new analyses incorporated.