Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction

Inorganic-organic hybrid gels were prepared by simultaneous condensation of the liquid mixture of ethyl silicate, ethyl borate and water soluble phenol resin with low molecular weight. The liquid mixtures were changed into lightly colored transparent gels after a catalyst addition and stirring. The obtained gels were crushed, dried and fired in controlled conditions to yield the inorganic precursors. Since the tailored inorganic precursors mainly consisted of SiO2 and carbon, silicon carbide was formed with the heat treatments in an Ar atmosphere beyond 1773 K with carbothermic reduction. The properties and morphology of the formed silicon carbide powders in terms of the starting precursor compositions and the conditions of the carbothermic reduction were investigated with SEM, XRD and TG-DTA analysis.     

Unexpected, drastic effect of triflic acid on oxidative diacetoxylation of iodoarenes by sodium perborate. A facile and efficient one-pot synthesis of (diacetoxyiodo)arenes

An easy, safe, and effective method for preparing (diacetoxyiodo)arenes from iodoarenes is presented. Addition of trifluoromethanesulfonic acid (triflic acid) as a promoter causes a drastic increase in the yield of (diacetoxyiodo)arenes in the reaction of iodoarenes with sodium perborate. The reaction of the iodoarenes with sodium perborate in acetic acid in the presence of triflic acid at 40-45 degrees C efficiently generates the corresponding (diacetoxyiodo)arenes in high yields within short time.     

Computer simulation for the cooligomerization system

In order to clarify the kinetic features of the styrene (A)–methyl methacrylate (B)–CCl₄(S) cooligomerization system, a computer simulation was carried out. The experimental data on the degree of polymerization and the deviation of the cooligomer composition from the statistical steady-state composition were comparatively well explained by calculations based on the kinetic equations derived from the assumed reaction scheme and the values of the velocity coefficients, although the values of the four velocity coefficients in the initiation step and the velocity coefficient of the termination by the coupling of two solvent radicals were estimated. The results of the calculation of the rate of each component reaction show that the following two reactions are the most important in the initiation and in the transfer and termination steps when the [S]/([A] + [B]) ratio is large: where, A, A*, and P are styrene, polystyryl radical, and the cooligomer, respectively. Moreover, it was concluded that the deviation of the cooligomer composition from the statistical steady-state composition was caused by these two reactions.     

Rhodium-catalyzed addition of arylboron compounds to nitriles, ketones, and imines

The rhodium-catalyzed addition reactions of sodium tetraphenylborate and arylboronic acids to nitriles, ketones, and imines were examined. The reaction of nitriles could be carried out efficiently in the presence of a catalyst system of [RhCl(cod)]₂-dppp and H₂O to give the corresponding monoarylated products selectively. Although unactivated ketones and imines are known to be poor electrophiles for rhodium-catalyzed arylation, the phenylation of them with use of sodium tetraphenylborate proceeded smoothly in the presence of [RhCl(cod)]₂ and Rh(acac)(cod) as catalysts, respectively. The addition of NH₄Cl was found to be crucial to effectively conduct the reaction of ketones and imines.     

Regioselective conjugate addition of sulfonylallyl carbanions to α, β-unsaturated ketones

Ambident lithium carbanions of allyl phenyl sulfones add 1,4-α to both acyclic and cyclic enones exclusively if HMPA is present in the medium; in contrast, 1,2-α addition to cyclic enone is the major kinetic course in the absence of HMPA, which is followed by rearrangement to the 1,4-γ adduct.     

Contrasteric stereochemical dictation of the cyclobutene ring-opening reaction by a vacant boron p orbital

Cyclobutene, having a pinacolatoboryl group at the 3-position, was prepared by the reaction of trimethyl borate with a cyclobutenyl anion, which was generated by reductive lithiation of 3-(phenylselenyl)cyclobutene. Its thermal ring-opening reaction provided (Z)-1-borylbuta-1,3-diene selectively despite the arising steric congestion. The contrasteric behavior was accounted for by assuming an electron-accepting interaction of the vacant boron p orbital with the distorted breaking sigma orbital in the inward transition state.     

Effects of the intramolecular NH...S hydrogen bond in mononuclear platinum(II) and palladium(II) complexes with 2,2'-bipyridine and benzenethiol derivatives

A series of complexes, [M(bpy)(SAr)2] (M = platinum(II) or palladium(II), bpy = 2,2'-bipyridine, SAr = 2- or 4-(acylamino)benzenethiolate, or 2-(alkylcarbamoyl)benzenethiolate), were synthesized and characterized on the basis of 1H NMR, IR, and electrochemical properties. The structures of [Pt(bpy)(S-2-Ph3CCONHC6H4)2] (1) and [Pt(bpy)(S-2-t-BuNHCOC6H4)2] (3) were determined by X-ray analysis. The complexes have intramolecular NH...S hydrogen bonds between the amide NH group and the sulfur atom. A weak NH...S hydrogen bond in these complexes and [Pd(bpy)(S-2-Ph3CCONHC6H4)2] (4) is detected from the 1H NMR spectra and the IR spectra in chloroform and in the solid state. [Pt(bpy)(S-2-Ph3CCONHC6H4)2] (1) exhibits a remarkably high-energy-shifted lowest-energy band in UV-visible spectra and has a positively shifted oxidation potential. The blue-shift of 42 nm and the positive shift of +0.24 V, as compared to those of [Pt(bpy)(SC6H5)2), are due to the effect of the NH...S hydrogen bond.     

A Dodecalanthanide Wheel Supported by p‐tert‐Butylsulfonylcalix[4]arene

A dodecaholmium wheel of [Ho₁₂(L)₆(mal)₄(AcO)₄(H₂O)₁₄] ( 1 ; mal=malonate) was synthesized by using p‐tert‐butylsulfonylcalix[4]arene (H₄L) as a cluster‐forming ligand. The wheel consists of three fragments of mononuclear A^3? ([Ho(L)(mal)(H₂O)]^3?), trinuclear B^3? ([Ho(H₂O)₂(mal)(Ho(L)(AcO))₂]^3?), and C³⁺ ([Ho(H₂O)₂]³⁺), and an alternate arrangement of these fragments (A^3?? C³⁺? B^3?? C³⁺? A^3?? C³⁺? B^3?? C³⁺? ) results in a wheel structure. The longest and shortest diameters of the core were estimated to be 17.7562(16) and 13.6810(13) Å, respectively, and the saddle‐shaped molecule possesses a pocketlike cavity inside.     

Novel evaluation method of biodegradabilities for oil-based polycaprolactone by naturally occurring radiocarbon-14 concentration using accelerator mass spectrometry based on ISO 14855-2 in controlled compost

The biodegradabilities of poly(?-caprolactone) (PCL) powders (av. size = 180.7 μm) in controlled compost at 58 °C have been studied using the microbial oxidative degradation analyzer (MODA) based on ISO 14855-2 entitled “Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test”. The biodegradability of the PCL powders was 101.4% in a 56-day test period by the ISO method. The biodegradabilities of PCL powders have been studied using percent modern carbon (pMC) measured by accelerated mass spectrometry (AMS). Trapped CO₂ was analyzed by AMS to determine the pMC (sample) using ¹⁴C radiocarbon concentration. By using the theory that the pMC (sample) was the sum of pMC (compost) (104.88%) and pMC (PCL) (0%) as the respective ratios in the determined period, CO₂ (respiration) was calculated only from one reaction vessel. The biodegradability of PCL powders was 79.9% in a 56-day test period by the AMS method. It was found that respiration activities in the sample vessel including PCL, compost and sea sand were the same as that in the blank vessel including compost and sea sand without PCL during the active biodegradation period (0-33 day) at 58 °C. It was confirmed that respiration activities in the sample vessel were slightly higher than that in the blank vessel after active biodegradation due to the propagation of microorganisms using energy and metabolites by PCL biodegradation during those periods.     

A study of molecular vibrational relaxation mechanism in condensed phase based upon mixed quantum-classical molecular dynamics. II. Noncollisional mechanism for the relaxation of a polar solute in supercritical water

Mixed quantum-classical molecular dynamics method has been applied to vibrational relaxation of a hydrophilic model NO in supercritical water at various densities along an isotherm above the critical temperature. The relaxation rate was determined based on Fermi's golden rule at each state point and showed an inverse S-shaped curve as a function of bulk density. The hydration number was also calculated as a function of bulk density based on the calculated radial distribution function, which showed a good correlation with the relaxation rate. Change of the survival probability of the solute vibrational state was analyzed as a function of time together with the trajectory of the solvent water and the interaction with it. We will show that the solvent molecule resides near the solute molecule for a while and the solvent contributes to the relaxation by the random-noiselike Coulombic interaction only when it stays near the solute. After the solvent leaves the solute, it shows no contribution to the relaxation. The relaxation mechanism for this system is significantly different from the collisional one found for a nonpolar solute in nonpolar solvent in Paper I. Then, the relaxation rate is determined, on average, by the hydration number or local density of the solvent. Thus, the density dependence of the relaxation rate for the polar solute in supercritical water is apparently similar to that found for the nonpolar solute in nonpolar solvent, although the molecular process is quite different from each other.