Building a Simple Model of a Pulse-Frequency-Modulation Photosensor and Demonstration of a 128 x 128-pixel Pulse-Frequency-Modulation Image Sensor Fabricated in a Standard 0.35-$mUm Complementary Metal-Oxide Semiconductor Technology

We present a simple model of the pulse-frequency-modulation (PFM) photosensor that provides explicit relationships between circuit parameters and output characteristics. The model treats the PFM photosensor with a feedback loop as an open loop circuit. Several characteristics such as output pulse frequency for light intensity and photosensitivity are expressed by device parameters of a photodiode, reset transistor, and chain of inverters. The relationships derived from the proposed model help us to comprehend the results by simulation program with integrated circuit emphasis (SPICE) or experiments. We design and fabricate a 128 x 128-pixel PFM image sensor with photosensitivity of 0.15 Hz/lux. As a demonstration, a figure of a dinosaur is captured using the fabricated image sensor to discuss its operation. Characteristics of a normal pixel and white and black defect pixels are measured and discussed based on the results of formulations.     

Heck coupling reaction of iodobenzene and styrene using supercritical water in the absence of a catalyst

Heck coupling reaction of iodobenzene and styrene proceeds rapidly and selectively in supercritical water even without any catalyst in the presence of base. Both the choice of base and the reaction conditions had a significant effect on the conversion and the selectivity of the coupling products. The addition of a relatively mild base such as potassium acetate facilitated the cross-coupling reaction, while the hydrolysis of phenyl halide was favored in the presence of a strong base. The conversion and the yields of coupling products increased with increasing temperature, reaching a maximum at 650 K near the critical temperature of water, and then decreased as the temperature was further increased. Water density had a significant influence on the reaction rate, showing nearly 30% augmentation with a slight increase in density from 0.45 to 0.56 g cm(-3), but had less effect on the product selectivity. Two possibilities of the role of water responsible for the noncatalytic Heck coupling reaction in supercritical water, that is, ion and water-catalyzed mechanisms have been considered.     

Clove oil prevents glycyrrhizin gel formation in aqueous solution

One persistent problem with using therapeutic concentrations of glycyrrhizin (GZ) is that, at these high concentrations, it forms a gel in an aqueous solution. We previously solved this problem by dissolving GZ in a highly concentrated phosphate buffer. Unfortunately, the resulting GZ solution has a hyperosmotic pressure that renders it unsuitable for use in patients. The aim of this study was to prepare a highly concentrated GZ solution having an osmotic pressure ratio of 1 and a pH of 7.4. By adding small amounts of oil and using a 100 mM phosphate buffer, we achieved an emulsified GZ solution that is stable at room temperature and has a physiological osmotic pressure and pH. When clove oil was used as an emulsifier, the gel formation temperature of GZ solution decreased appreciably compared to that of GZ solution without clove oil. Using scanning electron microscopy (SEM), we examined the detailed characteristics of GZ gels prepared from solutions with or without clove oil. SEM of cross sections of GZ gels revealed an irregular structure in gels prepared with clove oil, indicating that clove oil prevented the formation of the intermolecular GZ networks typically characterized by gels derived from pure GZ solutions.     

In situ organogelation at room temperature: direct synthesis of gelators in organic solvents

Organogels are formed through a conventional organogelation involving a heating process and an in situ organogelation at room temperature. The conventional organogelation is carried out by dissolution of gelators by heating, while the in situ organogelation is performed by mixing of highly reactive methyl 2,6-diisocyanatohexanoate (LDI) or 2-isocyanatoethyl 2,6-diisocyanatohexanoate (LTI) and alkylamines. The in situ organogelation produced the organogels within several seconds after mixing. The organogels prepared by the in situ organogelation showed quite similar FT-IR spectra and SEM photographs to those formed by conventional organogelation. Moreover, the in situ organogelation using LTI and octylamine as well as dodecylamine produced organogels of acetone, ethyl acetate, and acetonitrile that gelators 5 and 6 cannot gel through conventional organogelation.     

Magnetization-induced second harmonic generation in a polar ferromagnet

Second harmonic generation (SHG) induced by spontaneous magnetization has been investigated for a polar ferromagnetic crystal of GaFeO3. The Kerr rotation of the second harmonic light becomes gigantic with decreasing temperature below the magnetic transition temperature (approximately =205 K), e.g., as large as 73 degrees at 100 K. The magnetic domains can be visualized by using that large nonlinear Kerr rotation. The spectrum of the magnetization-induced SHG as measured indicates the two-photon resonant electronic process on a Fe3+ ion in the crystal.     

Aminoboranes as "compatible" iminium ion generators in aminative C-C bond formations

Aminoboranes have been shown to be highly efficient and mild iminium ion generators in the Mannich-type aminative coupling of aldehydes with silyl ketene acetals. By using aminoboranes bearing bulky amino groups, such as a diisopropylamino group, free secondary amines can be successfully used as the amino component in a three-component Mannich reaction with aldehydes and silyl ketene acetals.     

Electron localization and a confined electron gas in nanoporous inorganic electrides

The nanoporous main group oxide 12CaO.7Al(2)O3 (C12A7) can be transformed from a wide-gap insulator to an electride where electrons substitute anions in cages constituting a positive frame. Our ab initio calculations of the electronic structure of this novel material give a consistent explanation of its high conductivity and optical properties. They show that the electrons confined in the inert positive frame are localized in cages and undergo hopping between neighboring cages. The results are useful for the understanding of behavior of confined electron gas of different topology and electron-phonon coupling, and for designing new transparent conductors, electron emitters, and electrides.     

Exceeding the classical capacity limit in a quantum optical channel

The amount of information transmissible through a communications channel is determined by the noise characteristics of the channel and by the quantities of available transmission resources. In classical information theory, the amount of transmissible information can be increased twice at most when the transmission resource is doubled for fixed noise characteristics. In quantum information theory, however, the amount of information transmitted can increase even more than twice. We present a proof-of-principle demonstration of this superadditivity of classical capacity of a quantum channel by using the ternary symmetric states of a single photon, and by event selection from a weak coherent light source. We also show how the superadditive coding gain, even in a small code length, can boost the communication performance of the conventional coding technique.     

Adsorbed water for the electro-oxidation of methanol at Pt-Ru alloy

Adsorbed water molecules which promote the methanol oxidation reaction (MOR) at Pt-Ru alloy electrode are clearly detected by in-situ FTIR spectroscopy with the attenuated total reflection configuration, which directly supports the "bi-functional mechanism" for the MOR.     

Highly proton conductive polyimide electrolytes containing fluorenyl groups

Novel sulfonated polyimides containing fluorenyl groups show good thermal and oxidative stability as well as a high proton conductivity of 1.67 S cm(-1) at 120 degrees C and 100% RH.