Surfactants having polyfluoroalkyl chains. II. Syntheses of anionic surfactants having two polyfluoroalkyl chains including a trifluoromethyl group at each tail and their flocculation-redispersion ability for dispersed magnetite particles in water

Anionic surfactants having two polyfluoroalkyl chains per molecule, i.e. the sodium salt of bis(1H, 1H, 2H,2H-heptadeca-fluorodecyl)-2-sulfosuccinate, CF₃(CF₂)₇(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₇CF₃, the sodium salt of bis(1H, 1H, 2H, 2H-tridecafluoro-octyl)-2-sulfosuccinate, CF₃(CF₂)₅(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₅CF₃, and the sodium salt of bis(1H, 1H, 2H, 2H-nonafluorohexyl)-2-sulfosuccinate, CF₃(CF₂)₃(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₃CF₃, have been prepared from maleic anhydride, the corresponding alcohols possessing a polyfluoroalkyl chain and sodium hydrogen sulfite. The flocculation and redispersion abilities of these surfactants for dispersed magnetic particles in water have been examined to investigate the effect of the chain length. It was found that this ability was enhanced by an increase in the chain length. The contact angles for water for pelleted surface-modified magnetite have been measured. In order to compare this ability and the contact angles, data for other fluorinated surfactant have been obtained. The Kraff point, the surface tension and the pNa of the aqueous surfactant solutions have also been measured.     

Hydroxylated surface of GaAs as a scaffold for a heterogeneous Pd catalyst

A novel use of GaAs, namely, as a scaffold for a heterogeneous palladium catalyst, is proposed. Hydroxy groups on the GaAs surface play important roles. During the adsorption of Pd(OAc)(2) on the GaAs surface, the hydroxy groups attract Pd(ii) species by anion exchange. A subsequent redox reaction proceeds to generate Pd(0) nanoparticles, which are stabilized on the GaAs surface. This process is confirmed by surface-sensitive measurements: diffuse reflection IR spectroscopy and X-ray photoelectron spectroscopy. Moreover, a more bulk-sensitive measurement, hard X-ray photoemission spectroscopy with synchrotron radiation, also supported our considerations. The amounts of Pd(0) nanoparticles on the surface were evaluated by catalytic activity, yield, and recyclability in the Heck reaction, in addition to the deposit test.     

Synthesis of novel glycopeptide-polyoxazoline block copolymers by direct coupling between living anionic and cationic polymerization systems

A novel glycopeptide-containing block copolymer, poly[O-(tetra-O-acetyl-β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 5 ), was synthesized by mutual termination of living polymerizations of a sugar-substituted α-amino acid N-carboxyanhydride (NCA) ( 1 ) and 2-methyl-2-oxazoline ( 3 ). 5 was deacetylated to provide the glycopeptide-polyoxazoline block copolymer, poly[O-(β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 6 ).     

Mechanism underlying bioinertness of self-assembled monolayers of oligo(ethyleneglycol)-terminated alkanethiols on gold: protein adsorption, platelet adhesion, and surface forces

The mechanism underlying the bioinertness of the self-assembled monolayers of oligo(ethylene glycol)-terminated alkanethiol (OEG-SAM) was investigated with protein adsorption experiments, platelet adhesion tests, and surface force measurements with an atomic force microscope (AFM). In this work, we performed systematic analysis with SAMs having various terminal groups (-OEG, -OH, -COOH, -NH(2), and -CH(3)). The results of the protein adsorption experiment by the quartz crystal microbalance (QCM) method suggested that having one EG unit and the neutrality of total charges of the terminal groups are essential for protein-resistance. In particular, QCM with energy dissipation analyses indicated that proteins absorb onto the OEG-SAM via a very weak interaction compared with other SAMs. Contrary to the protein resistance, at least three EG units as well as the charge neutrality of the SAM are found to be required for anti-platelet adhesion. When the identical SAMs were formed on both AFM probe and substrate, our force measurements revealed that only the OEG-SAMs possessing more than two EG units showed strong repulsion in the range of 4 to 6 nm. In addition, we found that the SAMs with other terminal groups did not exhibit such repulsion. The repulsion between OEG-SAMs was always observed independent of solution conditions [NaCl concentration (between 0 and 1 M) and pH (between 3 and 11)] and was not observed in solution mixed with ethanol, which disrupts the three-dimensional network of the water molecules. We therefore concluded that the repulsion originated from structured interfacial water molecules. Considering the correlation between the above results, we propose that the layer of the structured interfacial water with a thickness of 2 to 3 nm (half of the range of the repulsion observed in the surface force measurements) plays an important role in deterring proteins and platelets from adsorption or adhesion.     

Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Synthesis,Structure, and Reactivity of Lewis Base Stabilized Plumbacyclopentadienylidenes

Plumbacyclopentadienylidenes, in which the lead atoms have divalent states and are coordinated by THF, pyridine and N‐heterocyclic carbene, were synthesized and characterized. The THF‐ and pyridine‐stabilized compounds can be regarded as rare examples of hypervalent 10‐X‐4 species. The equilibrium between the THF adduct and the free plumbacyclopentadienylidene was evidenced by spectroscopic analysis and theoretical calculations. The THF adduct in benzene converted into a plumbylene dimer, where one of the lead centers is coordinated by THF and the other lead atom is coordinated by a divalent lead atom, the dimer gradually decomposing into spiroplumbole. The THF adduct unexpectedly reacted with trifluoroborane and trichlorogallane to afford fluoroborole and chlorogallole, which are the first examples of non‐annulated fluoroborole and gallole, respectively.     

Reactions of 1,2‐dihydro‐4H‐3,1‐benzothiazine‐2,4‐dithiones (trithioisatoic anhydrides) with N‐substituted benzylamines and trialkyl phosphites

Reactions of 1,2‐dihydro‐4H‐3,1‐benzothiazine‐2,4‐dithiones (trithioisatoic anhydrides) 3 with N‐substi‐tuted benzylamines 9 gave 1,2‐dihydroquinazoline‐4‐thiones 10 , o‐thioureidodithiobenzoic acid 11 , o‐aminothiobenzamides 12 , 2‐amino‐3,1‐benzothiazine‐4‐thiones 13 , or quinazoline‐2,4‐dithiones 14 , depending on the kinds of amine and the reaction solvent. On the other hand, reaction of 3 with trialkyl phosphites afforded dialkyl (1,2‐dihydro‐2‐thioxo‐4H‐3,1‐benzothiazin‐4‐yl)phosphonates 18 .     

Simultaneous application of two or more supported liquid-phase organometallic catalysts: heterogeneous multifunctional reaction systems

Using the form of supported liquid-phase catalysts, two or more homogeneous catalysts can simultaneously be used with retaining their own activities and taking the advantage of catalyst-product separation and catalyst recycling.     

Laser photolysis studies of the photochemical reactions of chromium(III) octaethylporphyrin and tetramesitylporphyrin complexes in toluene solution

A nanosecond laser photolysis study was carried out for the Cr(III) porphyrin complexes of 2,3,7,8,12,13,17,18-octaethylporphyrin, [Cr(OEP)(Cl)(L)], and of 5,10,15,20-tetramesitylporphyrin, [Cr(TMP)(Cl)(L)], in toluene containing water and an excess amount of L (L = axial ligand). The laser photolysis generates the triplet excited state of the parent complex as well as a five-coordinate complex, [Cr(porphyrin)(Cl)], produced by the photodissociation of the axial ligand L. The yields for the formation of the triplet state and the photodissociation of L are found to markedly depend on the nature of both L and porphyrin ligand. The five-coordinate [Cr(porphyrin)(Cl)] readily reacts with both H(2)O and L in the bulk solution to give [Cr(porphyrin)(Cl)(H(2)O)] and [Cr(porphyrin)(Cl)(L)], respectively. The axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] is then substituted by the ligand L to regenerate the original complex [Cr(porphyrin)(Cl)(L)]. In principle, the substitution reaction takes place by the dissociative mechanism: the first step is the dissociation of H(2)O from [Cr(porphyrin)(Cl)(H(2)O)], followed by the reaction of the five-coordinate [Cr(porphyrin)(Cl)] with the ligand L to regenerate [Cr(porphyrin)(Cl)(L)]. The rate constants for this ligand substitution reaction are found to exhibit bell-shaped ligand concentration dependence. The detailed kinetic analysis revealed that both ligands L and H(2)O in toluene make a hydrogen bond with the axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] to yield dead-end complexes for the substitution reaction. The reaction mechanisms are discussed on the basis of the substituent effects of the porphyrin peripheral groups and the kinetic parameters determined from the temperature dependence of the rate constants.