Application of 1,2,3,5,6,7-hexahydropyrrolizinium perchlorate in the synthesis of 7a-substituted hexahydro-1h-pyrrolizines

The method for preparing 7a-substituted hexahydro-1H-pyrrolizines 2 from 1,2,3,5,6,7-hexahydropyrrol-izinium Perchlorate (3) was investigated, by which introduction of a wide variety of functionalities on C(7a) could be achieved easily.     

Ion-Pair Solvent Extraction of EDTA Anions with Tetraalkylammonium Ions in Various Organic Solvents

Summary.  The ion-pair solvent extraction behavior of ethylenediaminetetraacetate (EDTA) anion by various tetraalkylammonium ions was investigated at 25.0 ± 0.1°C. The extraction of EDTA exceeded 90% from the basic aqueous solution into the organic solvents such as n-hexane and benzene derivatives containing tri-n-octylmethylammonium chloride, but EDTA was hardly extracted from acidic solution. Among the chemical species of EDTA in aqueous solution, edta ⁴⁻ is the most extractable one. On the other hand, the extraction of EDTA was less than 1% into chloroform and 1,2-dichloroethane even from the basic aqueous solution. The effect of the structure of alkylammonium ion was also examined. Tetra-n-hexylammonium and tetra-n-octylammonium ions could not extract EDTA even from the basic aqueous solution, while the use of tri-n-octylmethylammonium and di-n-lauryldimethylammonium ions enhances the extraction of EDTA. These results suggest that the steric hindrance in the ion-pair of alkylammonium and EDTA anion in the organic phase affects the extractability of EDTA containing ion-pair. The solution structure of ion-pair in the organic phase was calculated by MMFF force field and the steric effect in the ion-pair was also suggested. From the extraction constants obtained, the possibility of the extraction separation of EDTA has been shown. Present address: Chemistry Department, Heilongjiang University, Harbin, China     

alpha-Aminoallylation of aldehydes with ammonia: stereoselective synthesis of homoallylic primary amines

Three-component reactions of aldehydes, ammonia, and allylboronates were found to provide homoallylic primary amines in high yields with high chemo- and stereoselectivities. A two-step, one-pot, stereoselective synthesis of an uncommon alpha-amino acid, alloisoleucine, was achieved utilizing this reaction.     

Indium triflate-catalyzed vinylation of beta-ketoesters with acetylene gas

[reaction: see text]. An In(OTf)(3)-catalyzed addition of a beta-ketoester to acetylene in the presence of molecular sieves produces a alpha-vinylated ketoester in good to excellent yield. The vinylation reaction proceeds without any loss of elements in starting molecules under solvent-free conditions and allows the use of welding-grade acetylene, providing a practical method for synthetic utilization of acetylene gas.     

Effects of diazepam administration on melatonin synthesis in the rat pineal gland in vivo.

The effect of diazepam (DZP) on melatonin synthesis in rat pineal gland was investigated in vivo. Subcutaneous injection of DZP (3 mg/kg) 1 h before the start of darkness significantly suppressed nocturnal elevations of pineal N-acetylserotonin (NAS) and melatonin contents in rats, and caused a 2-h delay in reaching the maximum melatonin level in the dark phase. DZP treatment also markedly suppressed the dark-induced increase of pineal N-acetyltransferase activity, which catalyzes the rate-limiting step in melatonin synthesis, but had no effect on hydroxyindole-O-methyltransferase activity, which catalyzes the final step of melatonin formation. Pineal norepinephrine and dopamine contents, in contrast, were not altered by DZP injection. The distribution rate of DZP to the brain reached the highest level 30 min after a single injection, while that to the pineal gland was observed 5 h later (i.e., 4 h after the start of darkness). It is clear that the inhibitory effect of DZP on melatonin synthesis in rat pineal gland appears concomitantly with the increase in the distribution volume of DZP into this gland. These results suggest that the inhibitory effect of DZP on melatonin synthesis results from the drug's direct action on the rat pineal gland.     

Novel canonical coding method for representation of three-dimensional structures

A new canonical coding method for representation of three-dimensional structures, CAST (CAnonical representation of STereochemistry), is described. CAST canonically codes stereochemistry around an atom in a molecule. The same CAST notations are given for atoms of molecules in the same conformation. The CAST code is based on the dihedral angles of four atoms that are uniquely defined by a molecular tree structure. CAST has successfully represented similarities and differences between several conformers.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Structure of Aqueous Gallium(III) Bromide Solutions Over a Temperature Range 80–333 K by Raman Spectroscopy, X-ray Absorption Fine Structure, and X-ray Diffraction

The structure and complex formation of concentrated aqueous gallium(III) bromide (GaBr₃) solutions have been investigated over a temperature range 80–333 K by Raman spectroscopy, X-ray absorption fine structure (XAFS), and X-ray diffraction. The Raman spectra obtained at various [Br^?]/[Ga³⁺] molar ratios and temperatures have shown that complex formation between Ga³⁺ and Br^? occurs as a predominant species, with [GaBr₄]^? at [Ga³⁺] as high as 1～2 M (M = mol?dm ^?3) and [Br^?]/[Ga³⁺] ratios > ～2, and that cooling of the solutions favors the formation of the aqua Ga³⁺. The intermediate species were not seen in the Raman spectra. The XAFS data have revealed that the aqua complex has a sixfold coordination as [Ga(H₂O)₆]³⁺ with a Ga³⁺–H₂O distance of (1.96 ± 0.02) Å, whereas the [GaBr₄]^? complex has a Ga³⁺–Br^? distance of (2.33± 0.02) Å, and that vitrification of the aqueous GaBr₃ solution at liquid nitrogen temperature shifts the equilibrium toward the aqua complex. The X-ray diffraction data at different subzero temperatures have shown a tendency of decreasing Ga³⁺–Br^? and increasing Ga³⁺–H₂O interactions with lowering temperature, confirming the preference of aqua Ga³⁺ in the supercooled liquid state as well as in the glassy state. The Ga³⁺–H₂O distance of ～1.8 Å for the tetrahedral coordination was found in a 2.01 M gallium(III) bromide solution with a [Br^?]/[Ga³⁺] ratio of 3.7 and gradually increased to a value of 1.92 Å for octahedral geometry with decreasing temperature, suggesting that equilibrium shifts from [GaBr₄]^? to [Ga(H₂O)₆]³⁺ through intermediate species, [GaBr _n ]^(3?n)+ (n = 2 and 3). The Ga³⁺–Br^? and Br^?–Br^? distances within [GaBr₄]^? with an almost tetrahedral symmetry are (2.35± 0.02) and (3.82± 0.03) Å, respectively. The Ga³⁺ has the second hydration shell at (4.03± 0.03) Å and the hydration of Br^? is characterized with a Br^?–H₂O distance of (3.35± 0.02) Å at all temperatures investigated.     

Preparative two-dimensional gel electrophoresis with agarose gels in the first dimension for high molecular mass proteins

A two-dimensional gel electrophoresis (2-DE) method that uses an agarose isoelectric focusing (IEF) gel in the first dimension (agarose 2-DE) was compared with an immobilized pH gradient 2-DE method (IPG-Dalt). The former method was shown to produce significant improvements in the 2-D electrophoretic separation of high molecular mass proteins larger than 150 kDa, up to 500 kDa, and to have a higher loading capacity, as much as 1.5 mg proteins in total for micropreparative runs. The extraction medium found best in this study for agarose 2-DE of mammal tissues was 6 M urea, 1 M thiourea, 0.5% 2-mercaptoethanol, protease inhibitor cocktail (Complete Mini EDTA-free), 1% Triton X-100 and 3% 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS). Trichloroacetic acid (TCA) treatment of the agarose gel after IEF is to be carefully weighed beforehand, because some high molecular mass proteins were less likely to enter the second-dimensional polyacrylamide gel after TCA fixation, and proteins such as mouse skeletal muscle actin gave pseudospots in the agarose 2-DE patterns without TCA fixation. As a good compromise we suggest fixation of proteins in the agarose gel with TCA for one hour or less. The first-dimensional agarose IEF gel containing Pharmalyte as a carrier ampholyte was 180 mm in length and 2.5-4.8 mm in diameter. The gel diameter was shown to determine the loading capacity of the agarose 2-DE, and 1.5 mg liver proteins in total were successfully separated by the use of a 4.8 mm diameter agarose gel.     

Electrodeposition of manganese and molybdenum mixed oxide thin films and their charge storage properties

Manganese and molybdenum mixed oxides in a thin film form were deposited anodically on a platinum substrate by cycling the electrode potential between 0 and +1.0 V vs Ag/AgCl in aqueous manganese(II) solutions containing molybdate anion (MoO(4)2-). A possible mechanism for the film formation is as follows. First, electrooxidation of Mn2+ ions with H2O yields Mn oxide and protons. Then, the protons being accumulated near the electrode surface react with MoO(4)2- to form polyoxomolybdate through a dehydrated condensation reaction (by protonation and dehydration). The condensed product coprecipitates with the Mn oxide. Cyclic voltammetry of the Mn/Mo oxide film-coated electrode in aqueous 0.5 M Na2SO4 solution exhibited a pseudocapacitive behavior with higher capacitance and better rate capability than that of the pure Mn oxide prepared similarly, most likely as a result of an increase in electrical conductivity of the film. Electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy clearly demonstrated that the observed pseudocapacitive behavior results from reversible extraction/insertion of hydrated protons to balance the charge upon oxidation/reduction of Mn3+/Mn4+ in the film.