Preparation of Polycrystalline Antimonic Acid Films by Electrophoretic Deposition

Cubic antimonic acid (Sb₂O₅·nH₂O) films were successfully prepared on stainless steel and Si(100) substrates by electrophoretic deposition (EPD) using two types of sols. The sols were prepared by reacting an H₂O₂ aqueous solution with Sb(O-i-C₃H₇)₃ or metallic Sb powder. The resulting films were found to consist of fine particles of cubic Sb₂O₅·nH₂O single crystals with uniform particle sizes of 30 nm and 150 nm. The weight of the Sb₂O₅·nH₂O deposit on the anode Si(100) substrate by EPD increased linearly with the current density in the range of 0–0.67 mA cm^–2, when the sol pH was over 7. The proton conductivity of the polycrystalline Sb₂O₅·nH₂O discs, formed from the two types of sols, was evaluated by an ac impedance method at room temperature under controlled levels of relative humidity.     

Development of direct fluorination technology for application to materials for lithium battery

Direct fluorination of 1,3-dioxolan-2-one with elemental fluorine was successfully carried out to provide 4-fluoro-1,3-dioxolan-2-one, which was expected as an additive for lithium ion secondary battery. 4-Fluoro-1,3-dioxolan-2-one was also further fluorinated with elemental fluorine to give three isomers of difluoro derivatives by the same methodology. Another topic is the preparation of trifluoromethanesulfonyl fluoride, an intermediate of lithium battery electrolyte, by the reaction of methanesulfonyl fluoride with elemental fluorine. The use of perfluoro-2-methylpentane as a solvent gave satisfactory selectivity of trifluoromethanesulfonyl fluoride.     

The photochemical synthesis of 4-acyl-1,2-dimethyl-3H-phenothiazin-3-ones

4-Acyl-1,2-dimethyl-3H-phenothiazin-3-ones were prepared by the photochemical reaction of 1,2-dimethyl-3H-phenothiazin-3-one with aldehydes. The structures of the newly prepared compounds were determined by elemental analysis, spectroscopic methods (ir, nmr and ms) and comparison with a sample prepared by an alternate route.     

Purification of enzymes by high-speed gel filtration on TSK-GEL SW columns

The purification of enzymes was investigated by high-speed gel filtration on TSK-GEL G3000SWG columns packed with porous silica gel deactivated by chemically bonded hydrophilic compounds. Crude β-galactosidase from bacterial cells and commercial urease were purified ca. 15-fold in a single gel filtration. These enzymes were eluted within an hour from the column and the recoveries of enzymatic activity were almost 100% although the operation was carried out at room temperature (22°). Samples up to 100 mg could be applied to the column without loss of separation efficiency.     

Aggregated structure analysis of polymer-protected platinum/ruthenium colloidal dispersions using EXAFS, HRTEM, and electron diffraction measurements

Polymer-protected platinum/ruthenium colloidal dispersions were prepared by refluxing mixed solutions of hexachloroplatinic(IV) acid and ruthenium(III) chloride in a mixture of ethanol/water (1/1 v/v) in the presence of poly(N-vinyl-2-pyrrolidone). The electronic spectra and transmission electron micrographs suggested that the colloidal dispersions are almost composed of the mixture of the small monometallic Pt and Ru clusters over all the ratio of Pt/Ru compositions. Extended X-ray absorption fine structure analyses and high resolution electron microprobe analyses indicated that no Pt/Ru alloy clusters exist in the dispersions, and the aggregation occurs between small monometallic Pt clusters (diameter ca. 15 A) and partially oxidized Ru microclusters (diameter less than 10 A). Electron diffraction measurements also suggested that the diffraction pattern of aggregated Pt/Ru cluster particles prepared by the simultaneous reduction of Pt and Ru ions is the same as that of the physical mixture of the small monometallic Pt and Ru clusters separately prepared. Therefore, it can be concluded that the aggregated Pt/Ru cluster particles, with 10 to 60 A in diameter, are built up by small monometallic Pt clusters and partially oxidized Ru microclusters, and that Pt/Ru alloy clusters are not formed.     

Amidase and peptidase activities of polyclonal immunoglobulin G present in the sera of patients with rheumatoid arthritis

Polyclonal Immunoglobulin (Ig) G from patients with rheumatoid arthritis (RA) and healthy subjects hydrolyzed carbobenzoxy−Val−Gly−Arg p-nitroanilide and D−Pro−Phe−Arg p-nitroanilide. RA IgG exhibited higher activity against the former substrate, but not the latter. On the other hand, RA IgG showed reduced activity against D−Pro−Phe−Arg methylcoumarinamide, when compared with those of the healthy controls. These results suggest that RA IgGs differ from normal IgGs in the substrate specificity of amidase activity. Preliminary studies have shown that two out of three RA IgG samples cleaved a pentapeptide—Gln−Arg−Arg−Arg−Ala−Ala— which is assumed to be associated with the risk of developing RA (Gregersen, P. K. et al. (1987), Arthritis Rheum. 30, 1205–1213). By contrast, virtually no cleavage of the same peptide was observed with IgG from healthy controls. A peptide analog, Gln−Arg−Arg−Trp−Ala, was not cleaved at all by any IgGs examined either from RA patients or healthy controls.     

Preparation and properties of aromatic polyamides from 5-t-butylisophthalic acid and various aromatic diamines

Aromatic polyamides (aramids) having pendant t-butyl group were synthesized by the direct polycondensation of 5-t-butylisophthalic acid with various aromatic diamines in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The aramids having inherent viscosities of 0.6–2.4 dL/g were obtained in quantitative yields. These polymers were readily soluble in various solvents such as NMP,N,N-dimethylacetamide, dimethyl sulfoxide, and pyridine, and gave transparent, tough and flexible films by casting from the NMP solutions. The aramids had glass transition temperatures between 250 and 330°C, and started to lose weight around 350°C, with 10% weight loss being recorded at about 450°C in air.     

Distribution pattern of rare earth ions between water and montmorillonite and its relation to the sorbed species of the ions.

REE (rare earth element) distribution coefficients (Kd) between the aqueous phase and montmorillonite surface were obtained to investigate the relation between the REE distribution patterns and the species of REE sorbed on the solid-water interface. It was shown that the features in the REE patterns, such as the slope of the REE patterns, the tetrad effect, and the Y/Ho ratio, were closely related to the REE species at the montmorillonite-water interface. In a binary system (REE-montmorillonite) below pH 5, three features (a larger Kd value for a lighter REE, the absence of the tetrad effect, and the Y/Ho ratio being unchanged from its initial value) suggest that hydrated REE are directly sorbed as an outer-sphere complex at the montmorillonite-water interface. Above pH 5.5, the features in the REE patterns, the larger Kd value for heavier REE, the M-type tetrad effect, and the reduced Y/Ho ratio, showed the formation of an inner-sphere complex of REE with -OH group at the montmorillonite surface. In addition, the REE patterns in the presence of humic acid at pH 5.9 were also studied, where the REE patterns became flat, suggesting that the humate complex is dominant as both dissolved and sorbed species of REE in the ternary system. All of these results were consistent with the spectroscopic data (laser-induced fluorescence spectroscopy) showing the local structure of Eu(III) conducted in the same experimental system. The present results suggest that the features in the REE distribution patterns include information on the REE species at the solid-water interface.     

Preparation and properties of polyarylates from 5-t-butylisophthaloyl chloride and various bisphenols

Polyarylates containing a t-butyl pendant group were prepared from 5-t-butylisophthaloyl chloride and various bisphenols through the phase-transfer catalyzed two-phase polycondensation. The polyarylates having inherent viscosities up to 3.1 dL/g were obtained quantitatively. They were readily soluble in various solvents such as chloroform, m-cresol, and pyridine. Coloreless, transparent, and flexible films could be cast from the chloroform solutions of the polymers. The polyarylates had glass transition temperatures between 210 and 320°C, and did not lose weight below 350°C, with 10% weight loss being recorded at 395–450°C in air.     

Synthesis of aromatic polythioamide-oxothioxoquinazolines from bis(1,3,4-thiadiazoline-5-thione) and aromatic bis-o-amino esters

Aromatic polythioamide-oxothioxoquinazolines were synthesized by the polycondensation of 2,2′-(m-phenylene)bis-1,3,4-thiadiazoline-5-thione with aromatic bis-o-amino esters. The polymerizations were carried out at 160°C in acidic media such as m-cresol, sulfolane, and polyphosphoric acid to produce polymers with reduced viscosities up to 0.5 dL/g. These polymers were soluble in polar aprotic solvents like N-methyl-2-pyrrolidone and some acidic media including m-cresol. The polythioamide-oxothioxoquinazolines showed relatively good thermal stability with 10% weight loss at 344–394°C in air.