Enantiomeric purity determination of malic acid in apple juices by multi-beam circular dichroism detection

A multi-beam circular dichroism (CD) detector which is easily constructed by inserting inexpensive optics into a conventional photo-diode array detector has an advantage of simultaneous detection of the absorbance and CD. The enantiomeric purity determination of malic acid in beverages was performed by this detection system. Malic acid when complexed with Cu(II) was found to have an absorbance maximum at around 750 nm. The L-malic acid-Cu(II) complex showed a positive Cotton effect in its absorbance band and its anisotropy factor (delta epsilon/epsilon) was relatively large at about 1/170. This complex was retained on a reversed-phase column with the addition of racemic 2-hydroxy-3-methylbutyric acid to the mobile phase as the ligand. A plot of the relative peak areas between the CD and the absorption (delta abs/abs) versus optical purity showed good linearity with a correlation coefficient of 0.999, and the precision expressed as the relative standard deviation of the errors from the regression line was +/-2.7% (2sigma). The accuracy of the proposed method was assessed by capillary electrophoresis. Eight commercially available juice products were analyzed using this method. Five of them were thought to be adulterated with synthetic malic acid.     

Ab initio calculations of isomerization reaction of diphosphene 1-sulfide to thiadiphosphirane

Ab initio Calculations of the isomerization reaction of diphosphene 1-sulfide (2′) to thiadiphosphirane (3′) suggest that the energy barrier of the reaction in the ground state is 25 kcal/mol and that 2′ lies 21 kcal/mol above 3′, while the calculations show that there exists one local minimum on the lowest triplet energy surface.     

Spin-lattice relaxation time as a useful indicator for the 13CNMR assignment of terminal cis- and trans-methyls in 2-methyl-1-propenyl moiety

T₁ gives a clue to assign cis- and trans-methyl carbons in 2-methyl-1-propenyl moiety.     

Ruthenium(II)-catalyzed hydrogenation of carbon dioxide to formic acid. Theoretical study of real catalyst, ligand effects, and solvation effects

Ruthenium-catalyzed hydrogenation of carbon dioxide to formic acid was theoretically investigated with DFT and MP4(SDQ) methods, where a real catalyst, cis-Ru(H)2(PMe3)3, was employed in calculations and compared with a model catalyst, cis-Ru(H)2(PH3)3. Significant differences between the real and model systems are observed in CO2 insertion into the Ru(II)-H bond, isomerization of a ruthenium(II) eta1-formate intermediate, and metathesis of the eta1-formate intermediate with a dihydrogen molecule. All these reactions more easily occur in the real system than in the model system. The differences are interpreted in terms that PMe3 is more donating than PH3 and the trans-influence of PMe3 is stronger than that of PH3. The rate-determining step is the CO2 insertion into the Ru(II)-H bond. Its deltaG(o++) value is 16.8 (6.8) kcal/mol, where the value without parentheses is calculated with the MP4(SDQ) method and that in parentheses is calculated with the DFT method. Because this insertion is considerably endothermic, the coordination of the dihydrogen molecule with the ruthenium(II)-eta1-formate intermediate must necessarily occur to suppress the deinsertion. This means that the reaction rate increases with increase in the pressure of dihydrogen molecule, which is consistent with the experimental results. Solvent effects were investigated with the DPCM method. The activation barrier and reaction energy of the CO2 insertion reaction moderately decrease in the order gas phase > n-heptane > THF, while the activation barrier of the metathesis considerably increases in the order gas phase < n-heptane < THF. Thus, a polar solvent should be used because the insertion reaction is the rate-determining step.     

Synthesis of new axially dissymmetric ligand with large perfluoroalkyl groups

A new axially dissymmetric ligand with large perfluoroalkyl groups, 2,2′-bis(1-hydroxy-1H-perfluorooctyl)biphenyl (1c), which could not be obtained by the coupling reaction of the aryl bromide using copper powder, was synthesized successfully by the coupling reaction using Ni(COD)₂. This ligand showed much higher asymmetric induction in the reaction of diethylzinc with benzaldehyde than the trifluoromethyl (1a) or pentafluoroethyl (1b) analogues.     

Amino acid end-group in commercial heparin. III. Determination of the number of amino groups of amino acid and hexosamine residues per heparin molecule

The reactions of heparin with 2,4,6-trinitrobenzenesulfonic acid (TNBS) were studied spectrometrically. Seven different commercial heparins were used in this study. The amino groups react with TNBS to form equimolar amounts of trinitrophenylated (TNP) amino groups and bisulfite ions. The TNP-amino groups further react with bisulfite ions to form the monosubstituted anionic sigma complex. The absorption spectrum with two maxima at approximately 350 nm and approximately 420 nm, characteristic of either the TNP-amino groups or the complex, was analyzed for the reaction of TNBS with heparin. It was shown that the reactivities of TNBS with amino groups from α-amino acid and hexosamine residues are greatly different. By combining the results of the reaction kinetics and the reaction of heparin with Sanger's reagent, the number of the α-amino groups and the free amino groups in hexosamine residues were determined. These data have been performed with a range of heparins from different commercial sources, of different activities and physical characteristics. No correlation was found between the free amino contents of these heparins and biological potency. © 1993 John Wiley & Sons, Inc.     

Acidity distribution of carboxyl groups in Loy Yang brown coal: its analysis and the change by heat treatment

Brown coals have a considerable number of acidic functional groups of which the main component is carboxyl groups, and the acidity has a wide distribution. In this paper, changes of the acidity distribution were examined by aqueous titration when brown coal was heat-treated to control its acidity distribution. For Loy Yang brown coal from Australia dried at 50 degrees C under vacuum (LY50), the acid dissociation constant, Ka, was distributed over a wide pKa range between 2 and 9. Then, using Gaussian functions, the acidity distribution was divided into four groups, which were characterized by average pKa values: average pKa value of 3.8 (hereafter referred to as Group A), 5.2 (Group B), 6.8 (Group C), and 8.3 (Group D). Among them, Groups A, B, and C were assigned to carboxyl groups. From the changes of the number of carboxyl groups when brown coal was heat-treated up to 400 degrees C, it was found that the way of decrease was different among these acidic groups. The decrease of the amount of carboxyl groups in Group C was significant, and at 325 degrees C most of them disappeared. On the other hand, the carboxyl groups in Group A remained even at a high temperature of 400 degrees C. We estimated approximately the structures around carboxyl groups for LY50 and their structural changes by heat treatment using the known pKa values for simple carboxylic acids and the pKa values calculated by the MOPAC program for complicated carboxylic acids.     

Basic evaluation of highly sensitive thyroid stimulating hormone immunoradiometric assay kits

Usefulness of three kinds of TSH kits by immunoradiometric assay (IRMA) was evaluated. They were able to measure low levels (less than 0.1 microIU/ml) in serum thyroid stimulating hormone (TSH) with incubation of short time (4 hours). In particular, RIABEAD II kit had a highly specific affinity for TSH and the normal range (+/- 2 S.D.) using it showed from 0.20 to 3.50 microIU/ml in 150 normal subjects. In patients with hyperthyroidism and in patients with hypothyroidism, the values of TSH were lower and higher than those of normal subjects, respectively. Another kits showed similar results. These results indicate that these TSH-IRMA kits are useful to evaluate serum TSH levels exactly.