Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

Adsorption and reactions of NO on clean and CO-precovered Ir(111)

Adsorption and reactions of NO on clean and CO-precovered Ir(111) were investigated by means of X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HR-EELS), infrared reflection absorption spectroscopy (IRAS), and temperature-programmed desorption (TPD). Two NO adsorption states, indicative of fcc-hollow sites and atop sites, were present on the Ir(111) surface at saturation coverage. NO adsorbed on hollow sites dissociated to Na and Oa at temperatures above 283 K. The dissociated Na desorbed to form N2 by recombination of Na at 574 K and by a disproportionation reaction between atop-NO and Na at 471 K. Preadsorbed CO inhibited the adsorption of NO on atop sites, whereas adsorption on hollow sites was not affected by the coexistence of CO. The adsorbed CO reacted with dissociated Oa and desorbed as CO2 at 574 K.     

A novel scheme of heterogeneous polymerization of ethylene

The heterogeneous polymerization of ethylene initiated by radiation in tert-butyl alcohol was studied. The polymerization was carried out in a 100-ml reactor at 25–100°C and pressures of 200–300 kg/cm² in the presence of 50 ml of tert-butyl alcohol containing 7 wt-% water. The amounts of polymerized monomer, the average molecular weight of polymer formed, and the molecular weight distribution of polymer were measured at various stages of reaction and at various temperatures. The molecular weight distribution was found to be very much dependent on the reaction time and temperature. For the polymer formed at 50–60°C in the very early stages of reaction, the molecular weight distribution is unimodal, and in the intermediate stage a shoulder appears at a molecular weight higher than the first peak which increases as the polymerization proceeds; eventually a bimodal curve is formed. The bimodal distribution curves were analyzed to determine the fractions and average molecular weights of the each peak. On the basis of these data for the molecular weight distribution and kinetic behavior, a new scheme for the heterogeneous polymerization is proposed which indicates that the polymerization proceeds via propagating radicals in two different physical states, namely, loose and rigid states.     

Atomic absorption spectrometry of traces of tri- and hexavalent chromium

Summary Atomic absorption spectrometry combined with extraction is described for the determination of tri- and hexavalent chromium. The chromium diethyldithiocarbamate chelate was used for chromium (VI), whereas hydroxyquinolate or thenoyltrifluoroacetonate chelate for chromium(III). The method is rapid and precise.

---

Zusammenfassung Extraktion und darauffolgende Messung der Atomarabsorption wurden zur Bestimmung von drei- und sechswertigem Chrom verwendet. Die Chelatverbindung mit Diäthyldithiocarbamat wurde für Chrom(VI), der Chelatkomplex mit Hydroxychinolin oder Thenoyltrifluoraceton für Chrom(III) verwendet. Das Verfahren ist rasch und genau.

     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.     

The catalytic Mannich reaction of 1,1-difluoro-2-trialkyl(aryl)silyl-2-trimethyl-silyloxyethenes: preparation of beta-amino acid derivatives

[reaction: see text] Catalytic Mannich reactions of 1,1-difluoro-2-trialkyl(aryl)silyl-2-trimethylsilyloxyethenes (3) with a variety of sulfonylimines were utilized for the preparation of alpha,alpha-difluoro-beta-amino acid derivatives (7). The influence of the Lewis acid on the reaction was examined. Methods for the conversion of alpha,alpha-difluoroacylsilanes to alpha,alpha-difluorocarboxylic acids were also explored.     

Stentor coeruleus SHOWS POSITIVE PHOTOKINESIS

Abstract— Stentor coeruleus responds to a sudden increase in light intensity with a step-up photophobic response (avoiding reaction), and to collimated light with negative phototaxis. The peaks of the action spectra for the photophobic response and for the phototaxis are in common, 610 nm.
5. coeruleus showed changes in its steady-state swimming velocity induced with varying intensities of light (photokinesis). The cells swam fast in light regions but slowly in dark ones (positive photokinesis); the mean velocity of swimming was about 0.6 mm/s at 100 lx but reached about 1.0 mm/s at 50000 lx. The peak of the action spectrum for this photokinesis was about 680 nm.
The organism is the first protozoan cell reported to show three types of photoresponse: photophobic response, phototaxis and photokinesis.     

Ionic-conductivity switching of vinyl malachite green leuconitrile copolymers based on photoinduced carrier generation

Copolymers of bis[4-(N,N-dimethylamino)phenyl]-4-vinylphenylmethanenitrile (vinyl Malachite Green leuconitrile) with methyl methacrylate or ω-methoxyoligo(oxyethylene) methacrylate have been synthesized, aiming at designing one-component-type organic polymers for photoswitchable ion-conducting films. The triphenylmethanenitrile copolymers with ω-methoxyoligo(oxyethylene) methacrylate were found to undergo ionic-conductivity switching by turning on and off UV light at ambient temperature, owing to their low glass transition temperature. © 1993 John Wiley & Sons, Inc.     

Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.     

Spectroscopic study of atomization processes and inter-element effects on the flame emission of chromium and iron in an air—acetylene flame

Emission spectroscopy is applied for characterization of reactions occurring in air—acetylene flames normally used for atomic absorption spectrometry. Inter-element effects on the emissions of chromium and iron are discussed. Two atomic emission lines with different upper energies and a molecular emission line of the diatomic oxide MO are compared for determination of the excitation temperature and the degree of atomization in fuel-rich and lean flames. The reductive power of the fuel-rich flame is essential for atomization of chromium salts. Inter-element effects by iron can be attributed to the formation of refractory oxides, and to mutual catalytic oxidation.