Flow injection titration basing on the merging-zone technique

The proposed approach relies on titration of a sample that is gradually diluted in strictly controlled way in the flow injection system developed. On each step of sample dilution equal volumes of the sample and titrant solutions are simultaneously injected into two carrier streams and the zones are merged with each other. Then, they are mixed completely in the mixing chamber, merged with a stream of indicator and directed to a detector. It has been revealed that the method provides the results with accuracy better than ±3.3% (RE) and with mean repeatability lower than 1.0% (RSD). When the analyte concentration in a sample is too low to be determined directly, the procedure of titration with standard addition is exploited. The proposed approach has been successfully applied to the determination of total acidity in vinegars and magnesium and calcium in pharmaceutical products. The results obtained were comparable with those provided by the reference methods. The proposed procedure is characterized by low consumption of sample (usually less than 2 mL), titrant (about 3 mL) and indicator (about 0.6 mL). Average time of a single analysis is similar to time of traditional batch analysis.     

Modern Modelling Methods in Drying

Several modern modelling techniques are presented as tools for drying science and technology, namely pore networks, discrete element method and population balances. After first presenting results from their own research, the authors indicate what future contributions to a better understanding of the drying process at different levels—single porous particles, agitated and fluidised beds—may be expected.     

(Co)polymerization behavior of supported metallocene catalysts. I. Ligand and substituent effect

Ethylene polymerization and its copolymerization with 1‐hexene with a set of supported metallocene catalysts were studied. As a carrier, the complex of magnesium chloride with tetrahydrofuran, which was previously pretreated with a triisobutylaluminium (TIBA), was used. The investigated metallocene compound differs in the metal type (Zr or Ti), the nature of the alkyl substituent in the cyclopentadienyl ring, and the type of ligand (Cp or Ind). The effect of catalyst composition on the anchored metal content, catalyst activity, comonomer reactivity, and polymer properties was investigated. The results obtained with supported catalysts were compared with those obtained with their homogeneous counterparts under the same (co)polymerization conditions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5562–5570, 2005     

Studies of structural composition distribution heterogeneity in ethylene/1-hexene copolymers using thermal fractionation technique (SSA): Effect of catalyst structure

Investigations into the compositional heterogeneity of ethylene/1-hexene copolymers obtained with various zirconocene/MAO catalysts, either homogeneous or supported on inorganic carriers such as a complex of magnesium chloride with tetrahydrofuran or methyl alcohol, were conducted. The dependence between metallocene structure, as well as catalyst immobilization, and the compositional heterogeneity of the related products was investigated. It was found that the heterogeneity of copolymers is determined by the metallocene catalyst structure. The amount of peaks on the DSC thermograms of copolymers and their division increase with the increase of bulkiness of the ligand in the catalytic system. The immobilization of the investigated catalysts on the magnesium carrier leads to an increase of the copolymer's compositional heterogeneity. However, the modification of the MgCl₂ carrier by tetrahydrofuran or methyl alcohol seems to not have any influence on the copolymers’ CCD.     

pH‐Responsive Non‐Ionic Diblock Copolymers: Ionization of Carboxylic Acid End‐Groups Induces an Order–Order Morphological Transition

A carboxylic acid based reversible additionfragmentation transfer (RAFT) agent is used to prepare gels composed of worm‐like diblock copolymers using two non‐ionic monomers, glycerol monomethacrylate (GMA) and 2‐hydroxypropyl methacrylate (HPMA). Ionization of the carboxylic acid end‐group on the PGMA stabilizer block induces a worm‐to‐sphere transition, which in turn causes immediate degelation. This morphological transition is fully reversible as determined by TEM and rheology studies and occurs because of a subtle change in the packing parameter for the copolymer chains. A control experiment where the methyl ester derivative of the RAFT agent is used to prepare the same diblock copolymer confirms that no pH‐responsive behavior occurs in this case. This end‐group ionization approach is important for the design of new pH‐responsive copolymer nano‐objects as, unlike polyacids or polybases, only a minimal amount of added base (or acid) is required to drive the morphological transition.     

Chromogenic macrocyclic derivatives of azoles—synthesis and properties

The synthesis of macrocyclic chromogenic derivatives of pyrrole and imidazole is described. The complexing properties of these compounds with metal cations were investigated spectrophotometrically in acetonitrile. The synthesized crown ethers were also tested as ion carriers in ion-selective membrane electrodes. The X-ray structure of one isomer of 18-membered pyrrole crown ether is reported.     

An automatic system for acidity determination based on sequential injection titration and the monosegmented flow approach

An automatic sequential injection system, combining monosegmented flow analysis, sequential injection analysis and sequential injection titration is proposed for acidity determination. The system enables controllable sample dilution and generation of standards of required concentration in a monosegmented sequential injection manner, sequential injection titration of the prepared solutions, data collecting, and handling. It has been tested on spectrophotometric determination of acetic, citric and phosphoric acids with sodium hydroxide used as a titrant and phenolphthalein or thymolphthalein (in the case of phosphoric acid determination) as indicators. Accuracy better than |4.4|% (RE) and repeatability better than 2.9% (RSD) have been obtained. It has been applied to the determination of total acidity in vinegars and various soft drinks. The system provides low sample (less than 0.3 mL) consumption. On average, analysis of a sample takes several minutes.     

Polypropylene and poly(ethylene‐co‐1‐octene) effective synthesis with diamine‐bis(phenolate) complexes: Effect of complex structure on catalyst activity and product microstructure

A series of group 4 metal complexes bearing amine‐bis(phenolate) ligands with the amino side‐arm donor: (μ‐O)[Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)₂ZrCl]₂ ( 1a ), R₂N(CH₂)₂N(CH₂‐2‐O‐3‐R¹‐5‐R²‐C₆H₂)₂TiCl₂ (R = Me, R¹, R² = tBu ( 2a ), R = iPr, R¹, R² = tBu ( 2b ), R = iPr, R¹ = tBu, R² = OMe ( 2c )), and Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)(CH₂‐2‐O‐C₆H₄)TiCl₂ ( 2d ) are used in ethylene and propylene homopolymerization, and ethylene/1‐octene copolymerization. All complexes, upon their activation with Al(iBu)₃/Ph₃CB(C₆F₅)₄, exhibit reasonable catalytic activity for ethylene homo‐ and copolymerization giving linear polyethylene with high to ultra‐high molecular weight (600·× 10³–3600·× 10³ g/mol). The activity of 1a /Al(iBu)₃/Ph₃CB(C₆F₅)₄ shows a positive comonomer effect, leading to over 400% increase of the polymer yield, while the addition of 1‐octene causes a slight reduction of the activity of the complexes 2a‐2d . The complexes with the NMe₂ donor group ( 2a , 2d , 1a ) display a high ability to incorporate a comonomer (up to 9–22 mol%), and the use of a bulkier donor group, N(iPr)₂ ( 2b , 2c ), results in a lower 1‐octene incorporation. All the produced copolymers reveal a broad chemical composition distribution. In addition, the investigated complexes polymerized propylene with the moderate ( 1a , 2a ) to low ( 2b‐2d ) activity, giving polymers with different microstructures, from purely atactic to isotactically enriched (mmmm = 28%). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2467–2476     

Electro-optic and dielectric properties of new binary ferroelectric and antiferroelectric liquid crystalline mixtures

Several new binary liquid crystalline mixtures have been designed and their properties were studied by complementary methods. It has been shown that even both pure components used for the mixture design possess the ferroelectric behaviour; the induced antiferroelectric smectic phase has been detected for one of the prepared mixtures. The phase diagram has been constructed and the existence of the antiferroelectric phase was confirmed by switching time and dielectric spectroscopy measurements. Some of the resulted mixtures possess very high values of the tilt angle that reaches close below 45° degrees at saturation. Values of spontaneous polarisation were found within 50–200 nC/cm² in dependence of the mixture’s composition. Due to specific properties, the obtained mixtures might be interesting for further design of multicomponent mixtures and formulation of the advanced nanocomposite systems.     

LP and SDP branch-and-cut algorithms for the minimum graph bisection problem: a computational comparison

While semidefinite relaxations are known to deliver good approximations for combinatorial optimization problems like graph bisection, their practical scope is mostly associated with small dense instances. For large sparse instances, cutting plane techniques are considered the method of choice. These are also applicable for semidefinite relaxations via the spectral bundle method, which allows to exploit structural properties like sparsity. In order to evaluate the relative strengths of linear and semidefinite approaches for large sparse instances, we set up a common branch-and-cut framework for linear and semidefinite relaxations of the minimum graph bisection problem. It incorporates separation algorithms for valid inequalities of the bisection cut polytope described in a recent study by the authors. While the problem specific cuts help to strengthen the linear relaxation significantly, the semidefinite bound profits much more from separating the cycle inequalities of the cut polytope on a slightly enlarged support. Extensive numerical experiments show that this semidefinite branch-and-cut approach without problem specific cuts is a superior choice to the classical simplex approach exploiting bisection specific inequalities on a clear majority of our large sparse test instances from VLSI design and numerical optimization.