Improvement of the Physicochemical Properties of Clotrimazole by Cyclodextrin Complexation

Complex formation between CDs and a very poorly water-soluble antifungal agent, clotrimazole (CLT), was studied. Products containing -CD were prepared in two molecular ratios by four methods. The rates of dissolution ofthe 1 : 1 drug/CD combinations revealed better dissolution properties than thoseof the 1 : 2 products. Drug/CD interactions in both aqueous solution and the solidstate were studied by phase solubility and thermal analysis. The effects of differentauxiliary materials (polymers, hydroxy acids and surfactants) on the aqueous solubilityof CLT were investigated. The aqueous solubility of CLT was increased significantly bythe addition of the auxiliary materials. Particle size distribution, partition coefficient,surface tension, heat of dissolution and wettability studies were also carried out.     

DNA hybridization enhancement using piezoelectric microagitation through a liquid coupling medium

In conventional DNA microarray hybridization, delivery of target cDNAs to surface-bounded probes depends solely on diffusion, which is notoriously slow, and thus typically requires 6-20 h to complete. In this study, piezoelectric microagitation through a liquid coupling medium is employed to enhance DNA hybridization efficiency and the results are compared with the standard static hybridization method. DNA hybridization was performed in a sealed aluminium chamber containing DNA microarray glass chip, coupling medium and piezoelectric transducers. 3×SSC (Saline Sodium Citrate) was used as a coupling medium to prevent overheating of the piezoelectric transducers and to effectively transmit ultrasonic wave to the glass chip. Flow visualization using fluidic dye and velocimetry (PTV) technique was applied to observe fluid transport in the hybridization chamber. It was revealed that the dye solution was homogeneously distributed within 10 min under dynamic agitation while it took over 1 h to reach the same level of homogeneity in static condition. Plasmodium falciparum DNA microarrays and total RNA extracted from parasite cells were used as a model for DNA microarray experiments. It was found that the required hybridization time may be substantially reduced from 16 h to 4 h by the use of dynamic hybridization scheme. With the same hybridization time of 16 h, dynamic hybridization resulted in higher fluorescent signals of ～33% and ～24% compared to static hybridization in Cy3 and Cy5 channels, respectively. Additionally, good/effective spots, some of which were not formed by static method, were enhanced and distributed more uniformly over the microarray. Therefore, the developed dynamic hybridization with integrated piezoelectric microagitation platform is highly promising for DNA analysis in molecular biology and medical applications.     

Photoactive building blocks for coordination complexes: Gilding 2,2′:6′,2″-terpyridine

The alkyne unit of 4′-ethynyl-2,2′:6′,2″-terpyridine has been functionalized with Ph₃PAu, (2-tolyl)₃PAu or Au(dppe)Au units to produce compounds 1-3, respectively. These derivatives have been characterized by electrospray mass spectrometry, solution ¹H and ¹³C NMR, UV-Vis and emission spectroscopies, and single crystal X-ray diffraction. In the solid state, molecules of 1 or 2 pack with separated domains of tpy and R₃PAu units; the tpy units in 2 (but not 1) exhibit face-to-face π-stacking. Compound 3 crystallizes as 2(3)^.CHCl₃, and the folded conformation of the dppe backbone results in a short (2.9470(8) Å) aurophilic interaction. Folded molecule 3 captures CHCl₃, preventing intramolecular face-to-face π-interactions between the tpy units. In CH₂Cl₂ solution, 1-3 are emissive when excited between 230 and 300 nm, but over minutes when λ_ex = 230 nm, the emission bands decay as the compounds photodegrade.     

Fast and simple method for determination of fatty acid methyl esters (FAME) in biodiesel blends using X-ray spectrometry

The determination of fatty acid methyl esters (FAME) in diesel fuel blends is an important aspect of production and blending process as well as quality control of distribution operations. In this study, energy-dispersive X-ray fluorescence spectrometer (EDXRF) is used for the first time for determination of FAME in biodiesel blends. The principle of the method is based on intensity difference of X-ray radiation scattered from hydrocarbons and from FAME. The experiment shows that coherent and incoherent radiation, commonly applied for evaluation of the average atomic number of the sample with light matrix, cannot be applied for FAME determination. However, the application of scattered continuous radiation gives excellent correlation between FAME concentration and intensity of scattered radiation. The best results are obtained if continuum is collected in the range of energy between 10.5 and 15.0 keV for rhodium X-ray tube, operated at 35 kV. Linear relationship between the FAME concentration and the inverse of scattered continuous radiation is obtained with the correlation coefficients of 0.999. Standard deviation of measurement is ca. 0.46% (v/v) of FAME and detection limit is 1.2% (v/v) for 600 s counting time and 50% dead-time loss using Si-PIN detector. The investigation shows that crucial issue in determination of FAME in biodiesel blends using EDXRF spectrometer is the precision of measurements resulting from the counting statistics. Therefore, much better results (0.20% (v/v) standard deviation and 0.52% (v/v) detection limit) can be expected if higher intensity of primary radiation is applied and X-ray spectrum is collected by silicon drift detector of high input count rate. For concentration of FAME from 10 to 100% (v/v), the differences between reference method (Fourier transform infrared spectrometry) and the proposed method usually do not exceed 1% (v/v) of FAME. The proposed method is fast, simple and enables FAME determination in wide range of concentration up to 100% of FAME without any sample treatment.     

Optimization of the Suzuki coupling reaction in the synthesis of 2‐[(2‐substituted)phenyl]pyrrole derivatives

A facile three‐step synthesis of 2‐(2‐aminophenyl)pyrrole ( 1 ) and 2‐[(2‐aminomethyl)phenyl]pyrrole ( 2 ) is reported by use of Suzuki coupling of N‐Boc‐pyrrol‐2‐yl boronic acid ( 3 ) and o‐substituted aryl halogenides, followed by hydrogenation. The Pd‐catalyzed cross‐coupling reaction is optimized to be applicable to a wide range of substitued aryl halogenides, with electron‐donating and electron‐withdrawing substituents, 5a , 5b , 5c , 5d , 5e , 5f , 5g . Moreover, Pd‐catalyzed coupling of o‐bromoaniline and 3 could be applied for the one‐step preparation of pyrrolo[1,2‐c]quinazolin‐5(6H)‐one ( 8 ). J. Heterocyclic Chem., (2011).     

Platinum(IV) coordination compounds containing 5-methyl-1,2,4-triazolo[1,5-a]pyrimidin-7(4H)-one as nonleaving ligand. Molecular and cytotoxicity in vitro characterization

Novel platinum(IV) coordination compounds with 5-methyl-1,2,4-triazolo[1,5-a]pyrimidin-7(4H)-one (HmtpO): cis-trans-[PtCl(2)(OH)(2)(NH(3))(HmtpO)] (1), cis-trans-[PtCl(5)(HmtpO)][(CH(3))(2)NH(2)] (2) have been prepared and structurally characterized by spectroscopic methods ((1)H, IR and X-ray crystallography (2)). The X-ray results indicate that the local geometry around the platinum(IV) centre approximates a typical octahedral arrangement with nitrogen atom N3 of the HmtpO and three chloride atoms in equatorial positions. The remaining two axial positions are occupied by two chlorides. The preliminary assessment of antitumor properties of (1) was performed as an in vitro antiproliferative activity against HL-60 human acute promyelocytic leukemia and HCV29T bladder cancer. The cis-trans-[PtCl(2)(OH)(2)(NH(3))(HmtpO)] (1) exhibits higher cytotoxic activity against HL-60 (IC(50)=6.4 μM) than cisplatin.     

Kinetics of 1H→13C NMR cross-polarization in polymorphs and solvates of the antipsychotic drug olanzapine

The (1)H→(13)C NMR cross-polarization (CP) was studied under magic-angle spinning at 7.5 kHz in various crystal forms of the antipsychotic drug olanzapine: two polymorphs (metastable I and stable II) and eight solvates containing organic solvent and water molecules. The CP kinetics followed the non-classical I-I(*)-S model, in which CP begins in a spin cluster of proximate abundant spins I(*) and rare spins S, then is controlled by spin diffusion of the abundant spins I from bulk to the I(*) spins of the spin cluster and finally is governed by spin-lattice relaxation of the abundant spins in the rotating frame. The corresponding CP kinetics parameters were determined and analyzed. It was demonstrated that the, λ and T(df) values (the CP time constant, the cluster composition parameter and the (1)H spin-diffusion constant, respectively) were very useful to discriminate the functional groups, especially in the 3D parameter space. In order to conveniently analyze the large amount (175) of the collected CP parameters, the number of the observed variables was reduced using the principal component (PC) analysis. The 2D plot of PC2 vs. PC1 showed adequate separation of the CH(3), CH(2), CH and C cases (C stands for carbons without adjacent hydrogens). It was demonstrated that those cases were located along the PC1 axis in the order of increasing (1)H-(13)C dipolar couplings: C相似文献   

Physical properties of two systems with induced antiferroelectric phase

Two ferroelectric three‐ring chiral esters, one with a partially fluorinated alkyl chain and another with a cyano terminal group, were mixed with a structurally similar compound having an alkyl terminal chain. In their mixtures an antiferroelectric phase was induced. The phase behaviour, spontaneous polarisation, tilt angle, smectic layer spacing and helical pitch of both systems were determined. The mechanism of the induction of an antiferroelectric phase is different in both cases, with highly tilted phases in former system and less tilted phases in the latter.     

Thiamacrocyclic lactones: new Ag(I)-ionophores

The syntheses of novel adamantane thialactones 5-12 are reported, and the results of the heavy- and transition-metal cation extraction experiments are described. The results are compared with those obtained with similar thiamacrocyclic ligands that have flexible chains of methylene groups incorporated into the macrocyclic framework as in 13-20. The results show that most of the hosts studied are very good in complexing the Ag(+) ion. The formation of complexes has also been demonstrated using NMR titration experiments for macrocycles 13 and 14 with AgTFA. Introduction of a single polycyclic molecule into the 15- to 18-membered rings increases the rigidity and preorganizes the ligand for complexation. However, two adamantane molecules embedded in the ring usually diminish the complexing ability of the ligand, primarily due to sterical effects of the bulky adamantane moiety that obstructs formation of an optimal geometry for binding the desired metal ion. The structures of macrocycles 5, 7, 9, 11, and 19 were determined by X-ray structure analysis, and their conformational properties are discussed. In the solid state, 7, 11, and 19 are organized into tubular fashion using C-H...O interactions. Also, two silver complexes with thialactone 13, Ag13 and Ag(13)(2), were prepared and characterized. The structure analysis of Ag13 and Ag(13)(2) reveals the formation of mononuclear and binuclear species with silver in ambivalent, tetrahedral coordination via sulfur and oxygen from trifluoroacetate anion.     

Vanadium-based Ziegler-Natta catalyst supported on MgCl2(THF)2 for ethylene polymerization

A supported magnesium-vanadium-aluminium catalyst was prepared by depositing –with the use of a milling technique–VOCl₃ on the MgCl₂(THF)₂ support and subsequent activation with diethylaluminium chloride. Catalytic activity of the obtained system for ethylene polymerization was evaluated as a function of Mg/V and Al/V ratios as well as catalyst ageing time and polymerization temperature. High concentrations of THF in the catalytic system and considerable excess of an organoaluminium co-catalyst were found to have no deactivating action on vanadium active sites. The catalyst obtained is stable and its activity for ethylene polymerization is high. It yields polyethylene with higher molecular weight and higher melting point than offered by the materials produced with the use of a corresponding unsupported vanadium catalyst or a titanium-based system on the same magnesium support. Kinetic investigations confirmed stability of this catalyst irrespective of its concentration in the polymerization medium or of monomer concentration. Moreover, analysis of the kinetic findings revealed that over 80% of vanadium employed forms active polymerization sites.