New Strategies for the Simple and Sensitive Voltammetric Direct Quantification of Se(IV) in Environmental Waters Employing Bismuth Film Modified Glassy Carbon Electrode and Amberlite Resin

An analytical procedure regarding the determination of selenium(IV) by anodic stripping voltammetry exploiting the in situ plated bismuth film electrode is described. Since organics are commonly present in untreated natural water samples, the use of Amberlite XAD-7 resin turns out to be quite important to avoid problems such as the adsorption of these compounds on the working electrode. The optimum circumstances for the detection of selenium in water using differential pulse voltammetry techniques were found to be as follows: 0.1 mol L⁻¹ acetic acid, 1.9 × 10⁻⁵ mol L⁻¹ Bi(III), 0.1 g Amberlite XAD-7 resin, and successive potentials of −1.6 V for 5 s and −0.4 V for 60 s, during which the in situ formation of the bismuth film on glassy carbon and the accumulation of selenium took place. The current of the anodic peak varies linearly with the selenium concentration ranging from 3 × 10⁻⁹ mol L⁻¹ to 3 × 10⁻⁶ mol L⁻¹ (r = 0.9995), with a detection limit of 8 × 10⁻¹⁰ mol L⁻¹. The proposed procedure was used for Se(IV) determination in certified reference materials and natural water samples, and acceptable results and recoveries were obtained.     

Field effect transistors for terahertz detection - silicon versus III–V material issue

Resonant frequencies of the two-dimensional plasma in FETs reach the THz range for nanometer transistor channels. Non-linear properties of the electron plasma are responsible for detection of THz radiation with FETs. Resonant excitation of plasma waves with sub-THz and THz radiation was demonstrated for short gate transistors at cryogenic temperatures. At room temperature, plasma oscillations are usually over-damped, but the FETs can still operate as efficient broadband THz detectors. The paper presents the main theoretical and experimental results on detection with FETs stressing their possible THz imaging applications. We discuss advantages and disadvantages of application of III–V GaAs and GaN HEMTs and silicon MOSFETs.     

Copolymerization of ethylene with 1‐hexene over metallocene catalyst supported on complex of magnesium chloride with tetrahydrofuran

The study of ethylene/1‐hexene copolymerization with the zirconocene catalyst, bis(cyclopentadienyl)zirconium dichloride (Cp₂ZrCl₂)/methylaluminoxane (MAO), anchored on a MgCl₂(THF)₂ support was carried out. The influence of 1‐hexene concentration in the feed on catalyst productivity and comonomer reactivity as well as other properties was investigated. Additionally, the effect of support modification by the organoaluminum compounds [(MAO, trimethlaluminum (AlMe₃), or diethylaluminum chloride (Et₂AlCl)] on the behavior of the MgCl₂(THF)₂/Cp₂ZrCl₂/MAO catalyst in the copolymerization process and on the properties of the copolymers was explored. Immobilization of the Cp₂ZrCl₂ compound on the complex magnesium support MgCl₂(THF)₂ resulted in an effective system for the copolymerization of ethylene with 1‐hexene. The modification of the support as well as the kind of organoaluminum compound used as a modifier influenced the activity of the examined catalyst system. Additionally, the profitable influence of immobilization of the homogeneous catalyst as well as modification of the support applied on the molecular weight and molecular weight distribution of the copolymers was established. Finally, with the successive self‐nucleation/annealing procedure, the copolymers obtained over both homogeneous and heterogeneous metallocene catalysts were heterogeneous with respect to their chemical composition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2512–2519, 2004     

Effect of the Structure of Selected Metalloporphyrins on their Chromatographic Properties

JPC – Journal of Planar Chromatography – Modern TLC - We have determined the effect of the structure of selected metallo-porphyrins on their chromatographic properties. Separations of...     

Chemical conjugation of an mRNA cap analogue with a cell-penetrating peptide as a potential membrane permeable translation inhibitor

We present a versatile method for chemical conjugation of a dinucleotide cap analogue with a cell-penetrating peptide. The final coupling reaction is between an azide-modified peptide (MPS-N₃)—a fragment that is responsible for transport of the conjugate through the cell membrane, with a biologically active compound—and an alkynylated cap structure, using the Cu(I)-catalyzed click reaction.     

Development of a High Performance Liquid Chromatography with Diode Array Detector (HPLC-DAD) Method for Determination of Biogenic Amines in Ripened Cheeses

Biogenic amines (BAs) are organic, basic nitrogenous compounds formed during the decarboxylation of amino acids. A method for the determination of eight biogenic amines (tryptamine, 2-phenyletylamine, putrescine, cadaverine, histamine, tyramine, spermidine, spermine) in ripened cheeses was developed and validated. Cheese samples with the addition of internal standards were extracted with 0.2 M perchloric acid and pre-column derivatized with dansyl chloride at 60 °C for 15 min, purified with toluene and dried under a stream of nitrogen. The samples were analyzed using high performance liquid chromatography with diode array detector (HPLC-DAD). The method was validated with the BAs at three concentration levels: 50, 100, and 200 mg/kg, respectively. The obtained values of correlation coefficient (R²) ranged at 0.9997–0.9998 for all of compounds. The limits of detection (LOD) and quantification (LOQ) were in ranges 1.53–1.88 and 5.13–6.28 mg/kg, respectively. The recovery for all of biogenic amines ranged from 70 to 120% and the precision (RSDr) value were <20%. The validated method was applied to analysis of 35 real ripened cheese samples purchased in Poland.     

Dichlorovanadium (IV) complexes with salen‐type ligands for ethylene polymerization

Vanadium complexes with tetradentate salen‐type ligands were first time explored in ethylene polymerizations. The effects of the vanadium complex structure, the alkyl aluminum cocatalysts type (EtAlCl₂, Et₂AlCl, Et₃Al, and MAO), and the polymerization conditions (Al/V molar ratio, temperature) on polyethylene yield were explored. It was found that EtAlCl₂ in conjunction with investigated vanadium complexes produced the most efficient catalytic systems. It was shown, moreover, that the structural changes of the tetradentate salen ligand (type of bridge which bond donor nitrogen atoms and type of substituent on aryl rings) affected activity of the catalytic system. The complexes containing ligands with cyclohexylene bridges were more active than those with ethylene bridges. Furthermore, the presence of electron‐withdrawing groups at the para position and electron‐donating substituents at the ortho position on the aryl rings of the ligands resulted in improved activity in relation to the systems with no substituents (with the exception of bulky t‐Bu group). The results presented also revealed that all vanadium complexes activated by common organoaluminum compounds gave linear polyethylenes with high melting points (134.8–137.6 °C), high molecular weights, and broad molecular weight distribution. The polymer produced in the presence of MAO possesses clearly lower melting point (131.4 °C) and some side groups (around 9/1000 C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6940–6949, 2008     

Bits and brains: Information flow in the nervous system

Until recently there have been no convincing quantitative measurements on the rates of information transmission in real neurons. Here we review the theoretical basis for making such measurements, together with the data which demonstrate remarkably high information rates in a variety of systems. In fact these rates are within a factor of two of the absolute physical limits set by the entropy of neural spike trains. Theses observations lead to sharp theoretical questions about the structure of the code and the strategy for adapting the code to different ensembles of input signals.     

From CCSD(T)/aug-cc-pVTZ-J to CCSD(T) complete basis set limit isotropic nuclear magnetic shieldings via affordable DFT/CBS calculations

It is shown that a linear correlation exists between nuclear shielding constants for nine small inorganic and organic molecules (N(2), CO, CO(2), NH(3), CH(4), C(2)H(2), C(2)H(4), C(2)H(6) and C(6)H(6)) calculated with 47 methods (42 DFT methods, RHF, MP2, SOPPA, SOPPA(CCSD), CCSD(T)) and the aug-cc-pVTZ-J basis set and corresponding complete basis set results, estimated from calculations with the family of polarization-consistent pcS-n basis sets. This implies that the remaining basis set error of the aug-cc-pVTZ-J basis set is very similar in DFT and CCSD(T) calculations. As the aug-cc-pVTZ-J basis set is significantly smaller, CCSD(T)/aug-cc-pVTZ-J calculations allow in combination with affordable DFT/pcS-n complete basis set calculations the prediction of nuclear shieldings at the CCSD(T) level of nearly similar accuracy as those, obtained by fitting results obtained from computationally demanding pcS-n calculations at the CCSD(T) limit. A significant saving of computational efforts can thus be achieved by scaling inexpensive CCSD(T)/aug-cc-pVTZ-J calculations of nuclear isotropic shieldings with affordable DFT complete basis set limit corrections.     

Cold crystallization from chiral smectic phase

Cold crystallization of liquid crystalline (S)-4’-(1-methylheptyloxycarbonyl) biphenyl-4-yl 4-[7-(2,2,3,3,4,4,4-heptafluorobutoxy) heptyl-1-oxy]-2-fluorobenzoate (3F7HPhF) was studied in isothermal as well as non-isothermal conditions. For isothermal conditions at temperatures between 233 and 250?K X-ray diffraction and differential scanning calorimetry were used. The crystallization kinetics was described by the Avrami–Avramov model, and the values of Avrami exponent, characteristic time and activation energy were determined. The kinetics of the cold crystallization in non-isothermal conditions for chosen heating rates up to 0.5?K/s was studied by differential scanning calorimetry and analyzed using Ozawa, Mo and Augis–Bennett models. Cold crystallization was found to be three-dimensional and controlled by diffusion both in the isothermal and non-isothermal process, however the activation energy determined in the non-isothermal process is about two times smaller than in the isothermal one.