Efficient synthesis of functionalized spiro-2,5-dihydro-1,2-λ-oxaphospholes

The reaction of ethyl propiolate with triphenylphosphine (Ph₃P) in the presence of N-alkylisatins led to ethyl 2,2,2-triphenyl-2,5-dihydro-1,2-λ⁵-oxaphosphole-4-carboxylate-spiro-1-alkyl-1,3-dihydro-2H-indol-2-ones in good yield. The reaction of dialkyl acetylenedicarboxylates with Ph₃P in the presence of N-alkylisatins led to dialkyl 2,2,2-triphenyl-2,5-dihydro-1,2-λ⁵-oxaphosphole-3,4-dicarboxylate-spiro-1-alkyl-1,3-dihydro-2H-indol-2-ones and alkyl 4-(alkoxy)-5-oxo-2,5-dihydro-3-furancarboxylate-spiro-1-alkyl-1,3-dihydro-2H-indol-2-ones.     

Synthesis and Characterization of [Zn2(4,4′‐bipy)n(AcO)4] – One‐dimensional Chain (n = 1) and One‐dimensional Double‐Chain (n = 2) Coordination Polymers

Two new Zn^II(μ‐4,4′‐bipy) coordination polymers with acetate anions, [Zn(4,4′‐bipy)(AcO)₂] ( 1 ) and [Zn₂(4,4′‐bipy)(AcO)₄] ( 2 ), have been synthesized. The compounds were characterized with elemental analysis, IR‐, ¹H NMR‐, ¹³C NMR spectroscopy and studied by thermal analysis, fluorescence measurements and x‐ray crystallography. The structural studies of compound 1 suggest the structure is a coordination polymer of zinc(II) consisting of linear double chains formed by bridging 4,4′‐bipy ligand and connection of the acetate‐bridged centrosymmetric [Zn₂(OAc)₂]²⁺ nodes.     

Second-order standard addition for deconvolution and quantification of fatty acids of fish oil using GC-MS

In the present work two second-order calibration methods, generalized rank annihilation method (GRAM) and multivariate curve resolution-alternating least square (MCR-ALS) have been applied on standard addition data matrices obtained by gas chromatography-mass spectrometry (GC-MS) to characterize and quantify four unsaturated fatty acids cis-9-hexadecenoic acid (C16:1ω7c), cis-9-octadecenoic acid (C18:1ω9c), cis-11-eicosenoic acid (C20:1ω9) and cis-13-docosenoic acid (C22:1ω9) in fish oil considering matrix interferences. With these methods, the area does not need to be directly measured and predictions are more accurate. Because of non-trilinear conditions of GC-MS data matrices, at first MCR-ALS and GRAM have been used on uncorrected data matrices. In comparison to MCR-ALS, biased and imprecise concentrations (%R.S.D. = 27.3) were obtained using GRAM without correcting the retention time-shift. As trilinearity is the essential requirement for implementing GRAM, the data need to be corrected. Multivariate rank alignment objectively corrects the run-to-run retention time variations between sample GC-MS data matrix and a standard addition GC-MS data matrix. Then, two second-order algorithms have been compared with each other. The above algorithms provided similar mean predictions, pure concentrations and spectral profiles. The results validated using standard mass spectra of target compounds. In addition, some of the quantification results were compared with the concentration values obtained using the selected mass chromatograms. As in the case of strong peak-overlap and the matrix effect, the classical univariate method of determination of the area of the peaks of the analytes will fail, the “second-order advantage” has solved this problem successfully.     

Indirect determination of free cyanide in water and industrial waste water by flow injection-atomic absorption spectrometry

A simple and rapid flow injection system is proposed for indirect determination of cyanide by flame atomic absorption spectrometry. It consists of a microcolumn of immobilized salen (N,N′-bis(salicylidene)ethylenediamine) on sodium dodecyl sulfate (SDS)-coated alumina saturated with silver ion and a carrier of dilute solution of sodium hydroxide (10⁻⁵ mol L⁻¹). The micro-column was located between the injection valve and nebulizer of atomic absorption spectrometry. Injection of 250 μL of aqueous cyanide standard or sample solution at pH range of 9–11 cause elution of silver as silver cyanide complexes, which was then measured by flame atomic absorption spectrometry. The absorbance was proportional to the concentration of cyanide in the sample. The graph of absorbance (as peak height) vs. cyanide concentration was linear over the concentration range of 0.1–10 mg L⁻¹ of cyanide, and the detection limit was 0.06 mg L⁻¹. The relative standard deviation at 1 and 3 mg L⁻¹ of cyanide concentration were 4.1 and 4.7%, respectively. The method was successfully applied to determination of cyanide in water and industrial waste waters, and the accuracy was examined through independent analysis by accepted method of pyridine-barbituric acid.     

Oxalic Acid: An Efficient and Cost-Effective Organic Catalyst for the Friedländer Quinoline Synthesis under Solvent-Free Conditions

Summary. Oxalic acid is used as an efficient catalyst in the condensation of 2-aminoaryl ketones with carbonyl compounds leading to the formation of quinolines in excellent yields under solvent-free conditions. This methodology offers significant improvements for the synthesis of quinolines with regard to the yield of products, simplicity in operation, inexpensive reagents, and green aspects by avoiding toxic catalysts and solvents.     

Complex Formation of 1,10-Dibenzyl-1,10-diaza-18-crown-6 with Ni2+, Cu2+, Ag+ and Cd2+ Metal Cations in Acetonitrile–dimethylformamide Binary Solutions

Conductance measurements are reported for nickel(II), cupper(II), silver(I) and cadmium(II), salts in acetonitrile (AN)–dimethylformamide (DMF) binary solvents containing macrocyclic ligand, 1,10-dibenzyl-1,10-diaza-18-crown-6 (DBDA18C6) at different temperatures. The changes in molar conductance caused by addition of DBDA18C6 to solutions were analyzed by non-linear least squares to give stability constants of 1:1 metal cation–DBDA18C6 complexes. The results show that the stabilities of the complexes are sensitive to solvent composition and in some cases the sequence of stabilities is changed with changing the composition of the mixed solvents. The values of thermodynamic quantities (ΔH°c and ΔS°c) for formation of DBDA18C6-Ni²⁺, DBDA18C6-Cu²⁺, DBDA18C6-Ag⁺ and DBDA18C6-Cd²⁺ complexes were obtained from temperature dependence of the stability constants and the results show that the values of ΔH°c and ΔS°c for these complexes are sensitive to the nature and composition of AN–DMF binary solutions, but they do not vary monotonically with the solvent composition.     

Thermal and photochemical isomerization of exocyclic 1,3-dienes: 1,1-diphenyl-3,4-bis(trimethylsilylmethylene)-1-silacyclopentane s-cis(E,E)

This paper describes the photochemical and the thermal isomerization of s-cis(E,E) 1,1-diphenly-3,4-bis(trimethylsilylmethylene)-1-silacyclopentane (1a). Under thermal conditions a 1,3-sigmatropic of the methylene hydrogen occurs, yielding the s-trans isomer (1b). The photochemical irradiation of (1a) at 300 nm for 1 h in deoxygenated benzene gives the corresponding s-cis(E,Z) isomer (1c) and then the s-cis(Z,Z) isomer (1d) after prolonged irradiation (3 h). There was no evidence for the formation of the corresponding cyclobutene resulting from the ring closure of the exocylic diene.     

Nitration of Aromatic Compounds Catalyzed by Divanadium-Substituted Molybdophosphoric Acid,H<Subscript>5</Subscript>[PMo<Subscript>10</Subscript>V<Subscript>2</Subscript>O<Subscript>40</Subscript>]

Summary. The nitration of aromatic compounds was carried out in the presence of divanadium-substituted molybdophosphoric acid, H₅PMo₁₀V₂O₄₀, as catalyst and a mixture of nitric acid and acetic anhydride as nitrating agent. In the presence of this heteropolyacid the ortho- and para-nitro compounds were obtained in good to excellent yields under mild reaction conditions.     

Destructive effect of solar light on morphology of colloidal silver nanocubes

Colloidal silver nanocubes (NCs) were successfully synthesized by reduction of silver nitrate with ethylene glycol and polyvinylpyrrolidon as capping agent. The effect of solar light irradiation on the formation and morphology of silver NCs was investigated. Moreover, altering the amount of sodium sulfide was used to control the morphology and shape of primary silver seeds. Scanning electron microscopy, transmitting electron microscopy, X-ray diffraction and UV-vis spectroscopy were used to characterize silver NCs. The samples prepared under the solar light irradiation do not possess cubic shape while highly monodispersed silver NCs were obtained in dark room conditions. For dark room synthesis, a decrease of the amount of Na₂S by only 10 μL resulted in formation of mixture of silver nanospheres and nanowires in addition to NCs instead of the monodispersed silver NCs. However, similar increase of the amount of sodium sulfide results in distortion of cubic geometry of particles. The results suggest that solar light has a negative effect on the shape evolution of the primary silver seeds.