Thermodynamic properties of the mixtures of some ionic liquids with alcohols using a simple equation of state

In the present work, we have used a simple equation of state called the GMA EoS to calculate the density of three ionic liquid mixtures including 1-butyl-3-methylimidazolum hexafluorophosphate, [BMIM] [PF₆] + methanol, 1-butyl-3-methylimidazolum tetrafluoroborate, [BMIM] [BF₄] + methanol, and [BMIM] [BF₄] + ethanol at different temperatures, pressures, and compositions. The isothermal compressibility, excess molar volumes, and excess Gibbs molar energy of these mixtures have been computed using this equation of state. The values of statistical parameters show that the GMA EoS can predict these thermodynamic properties very well within the experimental errors. The results show that isothermal compressibility of ionic liquids is lower than alcohols and the effect of temperature and pressure on the isothermal compressibility of ionic liquids is lower than alcohols. The excess molar volumes and excess molar Gibbs energy for these ionic liquid mixtures with alcohols are all negative at various temperatures and pressures over the whole composition range. The results have been interpreted in terms of intermolecular interactions and structural factors of the ionic liquids and alcohols.     

Selective surface chemistry of allyl alcohol and allyl aldehyde on Si(1 0 0)2×1: Competition of [2 + 2] CC cycloaddition with O-H dissociation and with [2 + 2] CO cycloaddition in bifunctional molecules

Competition between the CC functional group with the OH group in allyl alcohol and with the CO group in allyl aldehyde in the adsorption and thermal chemistry on Si(1 0 0)2×1 has been studied by X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD), as well as density-functional theory (DFT) calculations. The similarities found in the C 1s and O 1s spectra for both molecules indicate that the O-H dissociation product for allyl alcohol and [2 + 2] CO cycloaddition product for allyl aldehyde are preferred over the corresponding [2 + 2] CC cycloaddition products. Temperature-dependent XPS and TPD studies further show that thermal evolution of these molecules gives rise to the formation of ethylene, acetylene, and propene on Si(1 0 0)2×1, with additional CO evolution only from allyl alcohol. The formation of these desorption products also supports that the [2 + 2] CC cycloaddition reaction does not occur. In addition, the formation of SiC at 1090 K is observed for both allyl alcohol and allyl aldehyde. We propose plausible surface-mediated reaction pathways for the formation of these thermal evolution products. The present work illustrates the crucial role of the Si(1 0 0)2×1 surface in selective reactions of the Si dimers with the O−H group in allyl alcohol and with the CO group in allyl aldehyde over the CC functional group common to both molecules.     

Molecular dynamics simulation of gas adsorption on defected graphene

Gas sensing is one of the most promising applications for graphene. Using molecular dynamics simulation method, adsorption isotherm of xenon (Xe) gas on defected and perfect graphene is studied in order to investigate sensing properties of graphene for Xe gas. In this method, first generation of Brenner many-body potential is used to simulate the interaction of carbon–carbon (C) atoms in graphene, and Lennard–Jones two-body potential is used to simulate interaction of Xe–Xe and Xe–C atoms. In the simulated systems, adsorption coverage, radial distribution function, heat of adsorption, binding energy and specific heat capacity at constant volume are calculated for several temperatures between 90 K and 130 K, and various pressures. It was found that both of the defected and perfect graphene could be introduced as very good candidates for adsorption of Xe gas.     

Calculation of optical and electronic properties of zinc sulfide produced thin layers under different deposition angles

Zinc sulfide nano layers were deposited on glass substrates at 300 K by physical vapor deposition method, under high vacuum conditions and different deposition angles. Thickness of the layers were measured 73 nm, by quartz crystal method. Optical reflectance and transmittance of the layers were measured in the wave length of 300?C1100 nm. Optical constants were calculated by Kramers-Kronig relations. The influence of deposition angle in optical properties of ZnS nano layers are investigated. By using Generalized Gradient Approximations in context of plane wave pseudo-potentials (norm conserving and Ultrasoft) and full-potential linearized augmented plane wave methods, Band structure calculated and compared with experimental results. Possible energy transitions are also reported.     

Determination of H2S,COS, CS2 and SO2 by an aluminium nitride nanocluster: DFT studies

ABSTRACT

Density functional theory calculations were used to investigate the potential application of an AlN nanocluster in the detection of H₂S, COS, CS₂ and SO₂ gases. In overall, the order of strength of interaction of these gases with the nanocluster is as follows: SO₂ (E_ad?=??17.6?kcal/mol)?>?H₂S (E_ad?=??14.0?kcal/mol)?>?COS (E_ad?=??8.4?kcal/mol)?>?CS₂ (E_ad?=??4.5?kcal/mol). This indicates that by increasing the electric dipole moment, the adsorption energy becomes more negative. We found that the Al₁₂N₁₂ nanocluster may be a promising work function-type sensor for SO₂ gas among the studied gases. Also, it is an electronic sensor for both SO₂ and CS₂ gases but selectively acts between them because of their different effects on the electrical conductivity. It is neither work function-type nor electronic sensor for H₂S and COS gases. The AlN nanocluster benefits from a short recovery time about 7.7?s and 18.0?ms for desorption of SO₂ and CS₂ gases from its surface at room temperature, respectively. It is also concluded that this cluster can work at a humid environment.     

Synthesis of Diaryl Ethers Through the Copper-Catalyzed Arylation of Phenols with Aryl Iodides Using KF/Al2O3

An efficient synthesis of diaryl ethers by the copper-catalyzed arylation of phenols with a variety of aryl iodide susing KF/Al₂O₃ as a suitable base and CuI and 1,3 diphenyl-1,3 propandione as the catalyst is described.     

Solid-Phase Microextraction of Phthalate Esters from Aqueous Media by Functionalized Carbon Nanotubes (Graphene Oxide Nanoribbons) and Determination by GC–FID

Multiwalled carbon nanotubes were exposed to hydrothermal treatment for obtaining graphene oxide nanoribbons (GONRs). The fabricated graphene oxide nanoribbons have been morphologically and compositionally characterized via FE-SEM, XRD, and FT-IR techniques. The as-synthesized GONRs have been used as sorbent phase for headspace solid-phase microextraction of phthalate esters (PEs) from aqueous solutions. In this regard, the GC–FID analysis route has been used for quantification of PEs. The new SPME fiber shows remarkable analytical figures of merit including broad dynamic linear ranges, low limits of detection, as well as good stability and reasonable relative standard deviations for evaluation of PEs. The linearity of the method for analysis of PEs including DnBP, DnPP, DEHP, DEHA, BBP, and DMP was between the range of 0.05–100, 0.05–100, 0.1–100, 0.1–100, 0.2–100, and 0.5–100 μg L^?1, respectively. The limits of detection (based on S/N?=?3) and correlation coefficients were found to be in the range of 0.02–0.2 μg L^?1 and 0.9907–0.9952, correspondingly. The prepared GONR-coated SPME fiber shows larger extraction yield in comparison to pristine MWNTs and commercial PDMS SPME fibers. Furthermore, real sample analysis showed that there is no significant matrix effect for evaluation of PEs from environmental water samples and proposed method could be used for evaluation and determination of PEs from aqueous samples in a precise and accurate manner. The existence of functional groups, π–π interactions, as well as hydrogen bonding between adsorbent phase and PE analytes could be the reason for observing such a high extraction yield.

     

Cross-Correlated Motions in Azidolysozyme

The changes in the local and global dynamics of azide-labelled lysozyme compared with that of the wild type protein are quantitatively assessed for all alanine residues along the polypeptide chain. Although attaching -N3 to alanine residues has been considered to be a minimally invasive change in the protein it is found that depending on the location of the alanine residue, the local and global changes in the dynamics differ. For Ala92, the change in the cross-correlated motions are minimal, whereas attaching -N3 to Ala90 leads to pronounced differences in the local and global correlations as quantified by the cross-correlation coefficients of the Cα atoms. We also demonstrate that the spectral region of the asymmetric azide stretch distinguishes between alanine attachment sites, whereas changes in the low frequency, far-infrared region are less characteristic.