Direct reductive amination and selective 1,2-reduction of α,β-unsaturated aldehydes and ketones by NaBH4 using H3PW12O40 as catalyst

A simple and convenient procedure for direct reductive amination of aldehydes and ketones with sodium borohydride is described. The reaction has been carried out in methanol in the presence of a catalytic amount of H₃PW₁₂O₄₀ (0.5 mol %). α,β-Unsaturated aldehydes and ketones can be easily converted into the corresponding allyl alcohols by reaction with H₃PW₁₂O₄₀ (0.5 mol %)/NaBH₄.     

Investigation of the Effect of Various Substituents on the Density of Tetrazolium Nitrate Salts as Green Energetic Materials

The substitution effect of various functional groups such as –NO₂, –CN, –N₃, –NF₂, and –NH₂ on the density of tetrazolium nitrate salts is investigated through multiple linear regression method. The methodology of this work introduces a new model, which related density of tetrazolium nitrate salts to the number of fluorine and nitrogen atoms, the presence of NF₂ groups, NO₂ groups, as well as CH₃ groups in the structural formula. The new reliable correlation shows that the NF₂ and NO₂ group can cause increasing the density of tetrazolium nitrate salts, especially NO₂, whereas the CH₃ group can decrease their density. The new proposed relationship has good reliability and predictability, so it can be used to design new rich nitrogen compounds based on tetrazolium nitrate salts as green energetic materials. These results are also tested for N,N′‐azo‐1,2,4‐triazolium nitrate salts, which is caused to derive another correlation. This correlation shows that the presence of NF₂ functional groups increases the density of N,N′‐azo‐1,2,4‐triazolium nitrate salts as well as the value of n_O/n_C.     

Synthesis and antibacterial activity of Schiff bases of 5-substituted isatins

Based on the existing reports on the bioactive isatin derivatives, a number of Schiff bases were synthesized by reacting 5-substituted isatins with bioactive amines/hydrazides and their structures were confirmed using spectroscopic methods such as NMR, IR and mass spectrometry. Furthermore, Nbenzylation of isatin followed by the Schiff base formation furnished a new series of compounds(11a–13c) which allowed the analysis of the effect of isatin N-substitution on the bioactivity of the resulting compounds. The antibacterial activity of the synthesized derivatives was evaluated using a microtiter plate method on a series of gram positive and gram negative bacterial strains. Compounds 2d, 3b, 5c and 6a were among the most potent derivatives against Pseudomonas aeruginosa(MIC = 6.25 μg/m L).Analysis of the structure–activity relationship showed that the incorporation of(thio)urea-based Schiff bases lead to more potent derivatives with a broader spectrum of antibacterial activity. In addition,highly lipophilic compounds such as 11a–12c did not show any measurable antibacterial activity, which implies that an optimal lipophilicity might be an important requirement for the antibacterial activity of the studied isatins. Finally, the finding that hydantoin derivatives of N-benzylisatins(13a–13c) still exhibit some antibacterial activity prompted us to consider exploring the bioactivity of more diverse derivatives of isatin-aminohydantoin Schiff bases(compounds 1a–1d) in our future studies.     

Simultaneous preconcentration and determination of malachite green and fuchsine dyes in seafood and environmental water samples using nano-alumina-based molecular imprinted polymer solid-phase extraction

Molecular imprinted polymer for determination of malachite green (MG) and fuchsine basic (FU) dyes by spectrophotometry has been used, to develop a novel simultaneous extraction and preconcentration method. Molecularly imprinted layer-coated nano-alumina (MIP@Nano-Al₂O₃) as adsorbent was prepared by surface molecular imprinting technique, and characterised by FTIR spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis (EDAX) and thermogravimetric analysis (TGA). The method is based on simultaneous extraction of MG and FU dyes from aqueous solution by using molecularly imprinted polymer and measuring the absorbance at 617 and 546 nm for MG and FU, respectively. Parameters which affect the extraction efficiency such as pH, volume of eluent and amount of adsorbent were investigated and optimised. Linear calibration curves were obtained in the range of 2–750 ng mL^?1 for MG and 1–240 ng mL^?1 for FU under optimum conditions. Detection limit based on three times the standard deviation of the blank (3S_b) was 0.655 and 0.245 ng mL^?1 (n = 10) for MG and FU, respectively. The relative standard deviation (RSD) for 100 ng mL^?1 of MG and FU was 2.35 and 3.06% (n = 7), respectively. The method was applied to the simultaneous determination of the dyes in different seafood and environmental water samples.     

Structures,Unimolecular Fragmentations,and Reactivities of the Self‐Assembled Multimetallic/Peptide Complexes [Mnn(GlyGly‐H)2n−1]+ and [Mnn+1(GlyGly‐H)2n]2+

Complexes of Mn²⁺ with deprotonated GlyGly are investigated by sustained off‐resonance irradiation collision‐induced dissociation (SORI‐CID), infrared multiple‐photon dissociation spectroscopy, ion–molecule reactions, and computational methods. Singly [Mn_n(GlyGly‐H)_2n?1]⁺ and doubly [Mn_n+1(GlyGly‐H)_2n]²⁺ charged clusters are formed from aqueous solutions of MnCl₂ and GlyGly by electrospray ionization. The most intense ion produced was the singly charged [M₂(GlyGly‐H)₃]⁺ cluster. Singly charged clusters show extensive fragmentations of small neutral molecules such as water and carbon dioxide as well as dissociation pathways related to the loss of NH₂CHCO and GlyGly. For the doubly charged clusters, however, loss of GlyGly is observed as the main dissociation pathway. Structure elucidation of [Mn₃(GlyGly‐H)₄]²⁺ clusters has also been done by IRMPD spectroscopy as well as DFT calculations. It is shown that the lowest energy structure of the [Mn₃(GlyGly‐H)₄]²⁺ cluster is deprotonated at all carboxylic acid groups and metal ions are coordinated with carbonyl oxygen atoms, and that all amine nitrogen atoms are hydrogen bonded to the amide hydrogen. A comparison of the calculated high‐spin (sextet) and low‐spin (quartet) state structures of [Mn₃(GlyGly‐H)₄]²⁺ is provided. IRMPD spectroscopic results are in agreement with the lowest energy high‐spin structure computed. Also, the gas‐phase reactivity of these complexes towards neutral CO and water was investigated. The parent complexes did not add any water or CO, presumably due to saturation at the metal cation. However, once some of the ligand was removed via CO₂ laser IRMPD, water was seen to add to the complex. These results are consistent with high‐spin Mn²⁺ complexes.     

Selective tetrahydropyranylation of alcohols and phenols using titanium(IV) salophen trifluoromethanesulfonate as an efficient catalyst

Titanium(IV) salophen trifluoromethanesulfonate, [Ti^IV(salophen)(OSO₂CF₃)₂], as a catalyst enables selective tetrahydropyranylation of alcohols and phenols with 3,4‐dihydro‐2H‐pyran. Using this catalytic system, primary, secondary and tertiary alcohols, as well as phenols, were converted to their corresponding tetrahydropyranyl ethers in high yields and short reaction times at room temperature. Investigation of the chemoselectivity of this method showed discrimination between the activity of primary alcohols in the presence of secondary and tertiary alcohols and phenols. This heterogenized catalyst could be reused several times without loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Structural characterization of a copper(II) complex containing oxidative cyclization of N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea,new ligands of 4-picolylthiourea derivatives and the precursor molecular structure of oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea

Three new compounds of aryl thiourea derivatives, namely N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea (L1), N-2-(6-picolyl)-N′-(4-methoxyphenyl)thiourea (L2) and N-2-(4-picolyl)-N′-(4-nitrophenyl)thiourea (L3), and the new copper(II) complex [Cu(4PicTz4OMePh)(OAC)(EtOH)] (C1), as a result of oxidative cyclization of the ligand (L1), were synthesized. In addition, pure precursor (P1), as the product of the oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea (L4), was isolated and characterized. Ligands (L1) and (L2) were characterized by ¹H and ¹³C NMR and single crystal X-ray analysis. ¹H NMR spectroscopy showed strong hydrogen bonding interactions between N′H-functionalities and the pyridine nitrogen atoms as well as weak intermolecular hydrogen bonding between the thione sulfur and the NH hydrogen. Structural studies of complex (C1) showed that the copper ion is five-coordinated with a square-pyramidal environment. The oxidative cyclization of ligand (L1) results in an anionic bidentate ligand in complex (C1). Both ligand (L1) and precursor (P1) crystallize as centrosymmetric dimers.     

Molecularly imprinted electrochemical aptasensor for the attomolar detection of bisphenol A

Gold nanoparticles (AuNPs) were electrodeposited on the surface of a glassy carbon electrode (GCE) and then treated with a mixture of a thiolated DNA sequence (p-63; with high affinity for bisphenol A) and free bisphenol A (BPÀ). Pyrrole was then electropolymerizaed on the surface of the GCE to entrap the BPA@p-63 complex. BPA is then extracted with acetic acid solution to obtain MIP cavities where the embedded DNA sequence acts as the binding site for BPA. Scanning electron microscopy, electrochemical impedance spectroscopy, and cyclic voltammetry were employed to characterize the surface of the modified GCE. Under the optimum conditions, the assay has a dynamic range that covers the 0.5 fM to 5 pM BPA concentration range and an 80 aM detection limit. It was applied to the quantitation of BPA in (spiked) milk, milk powder and water samples and gave acceptable recoveries.

Open image in new window

Graphical Abstract Schematic of the procedure for aptamer-based detection of BPA using unique features of the aptamer-based modified electrodes and MIP-based sensors. This assay has high sensitivity and good selectivity. It can presumably be transferred to other detection schemes for small molecules.

     

Heteropolyacid immobilized on polymer/magnetic zeolite nanocomposite as a new and recyclable catalyst for the selective oxidation of alcohols

A new magnetic oxidation catalyst was prepared using immobilization of tungstophosphoric acid on poly(N-vinylimidazole) entrapped magnetic nanozeolite and characterized by FTIR, TGA, XRD, SEM, TEM, EDX, VSM, and ICP-OES. The resulting heterogeneous catalyst displays high catalytic performance for selective oxidation of alcohols compared to the other catalysts. The catalyst could be reused eight times without any loss of catalytic activity.