Intramolecular dimers: a new design strategy for fluorescence-quenched probes

Fluorogenic probes dual-labeled with reporter and quencher dyes use a change in fluorescence to monitor biochemical events (e.g., substrate binding or enzyme digestion). Such events change the reporter-quencher distance, which affects fluorescence. Recently, it is has been shown that static quenching through intramolecular dimers is an important mechanism that can sometimes be more efficient than F?rster resonance energy transfer (FRET).     

Physico-chemical characterization of nanofiltration membranes.

This study presents a methodology for an in-depth characterization of six representative commercial nanofiltration membranes. Laboratory-made polyethersulfone membranes are included for reference. Besides the physical characterization [molecular weight cut-off (MWCO), surface charge, roughness and hydrophobicity], the membranes are also studied for their chemical composition [attenuated total reflectance Fourier spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS)] and porosity [positron annihilation spectroscopy (PAS)]. The chemical characterization indicates that all membranes are composed of at least two different layers. The presence of an additional third layer is proved and studied for membranes with a polyamide top layer. PAS experiments, in combination with FIB (focused ion beam) images, show that these membranes also have a thinner and a less porous skin layer (upper part of the top layer). In the skin layer, two different pore sizes are observed for all commercial membranes: a pore size of 1.25-1.55 angstroms as well as a pore size of 3.20-3.95 angstroms (both depending on the membrane type). Thus, the pore size distribution in nanofiltration membranes is bimodal, in contrast to the generally accepted log-normal distribution. Although the pore sizes are rather similar for all commercial membranes, their pore volume fraction and hence their porosity differ significantly.     

Reactions of the ionized enol tautomer of acetanilide: elimination of HNCO via a novel rearrangement

The reactions of ionised acetanilide, C(6)H(5)NH(=O)CH(3)(.+), and its enol, C(6)H(5)NH(OH)=CH(2)(.+), have been studied by a combination of tandem mass spectrometric and computational methods. These two isomeric radical cations have distinct chemistries at low internal energies. The keto tautomer eliminates exclusively CH(2)=C=O to give ionised aniline. In contrast, the enol tautomer loses H-N=C=O, via an unusual skeletal rearrangement, to form predominantly ionised methylene cyclohexadiene. Hydrogen atom loss also occurs from the enol tautomer, with the formation of protonated oxindole. The mechanisms for H-N=C=O and hydrogen atom loss both involve cyclisation; the former proceeds via a spiro transition state formed by attachment of the methylene group to the ipso position, whereas the latter entails the formation of a five-membered ring by attachment to the ortho position. The behaviour of labelled analogues reveals that these two processes have different site selectivities. Hydrogen atom loss involves a reverse critical energy and is subject to an isotope effect. Surprisingly, attempts to promote the enolisation of ionised acetanilide by proton-transport catalysis were unsuccessful. In a reversal of the usual situation for ionised carbonyl compounds, ionised acetanilide is actually more stable than its enol tautomer. The enol tautomer was resistant to proton-transport catalysed ketonisation to ionised acetanilide, possibly because the favoured geometry of the encounter complex with the base molecule is inappropriate for facilitating tautomerisation.     

Speciation and biosynthetic variation in four dictyoceratid sponges and their cyanobacterial symbiont, Oscillatoria spongeliae

Four species of marine sponges (Phylum Porifera, Order Dictyoceratida), which contain the filamentous cyanobacterial symbiont Oscillatoria spongeliae, were collected from four locations in Palau. The halogenated natural products associated with the symbiont were characterized from each sample, revealing that each species contained either chlorinated peptides, brominated diphenyl ethers, or no halogenated compounds. Analysis of the host sponges and the symbionts indicated that each species of sponge contained a distinct strain of morphologically similar cyanobacteria. Although cospeciation may be present in this group, we have identified that at least one host switching event has occurred in this symbiosis. Only the strain of O. spongeliae in the sponge containing the chlorinated compounds possessed genes involved in the biosynthesis of chlorinated leucine precursors, indicating that the chemical variation observed in these animals has a genetic foundation.     

Anionic-initiated polymerization of β-nitrostyrenes

β-Nitrostyrene and many of its derivatives have been shown to yield high polymers via anionic initiation with alkoxide ions in protic solvents, e.g., alcohols. A study was conducted to determine the effect of certain substituents on the polymerization characteristics of representative monomers of this series and the properties of their polymers. A kinetic study was conducted and the relative rates of propagation were unexpectedly found to correlate well with brown's σ⁺ values. The rates of initiation of two representative monomers, β-nitrostyrene and p-methoxy-β-nitrostyrene, with sodium ethoxide were found to be 3.51 and 2.86 liter/mole sec, respectively. The rate of chain transfer in ethanol was studied qualitatively by using gel-permeation chromatography (GPC) to obtain molecular weight distribution (MWD) curves. The low values of the M _w/M _n ratios indicated little chain transfer in the protic solvent.     

Analysis of CL-20 in environmental matrices: water and soil

Analytical techniques for the detection of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazatetracyclo(5.5.0.05,9.03,11)dodecane (CL-20) in water and soil are developed by adapting methods traditionally used for the analysis of nitroaromatics. CL-20 (a new explosives compound) is thermally labile, exhibits high polarity, and has low solubility in water. These constraints make the use of specialized sample handling, preparation, extraction, and analysis necessary. The ability to determine the concentrations of this new explosive compound in environmental matrices is helpful in understanding the environmental fate and effects of CL-20; understanding the physical, chemical, and biological fate of CL-20; and can be used in developing remediation technologies and determining their efficiency. The toxicity and mobility of new explosives in soil and groundwater are also of interest, and analytical techniques for quantitating CL-20 and its degradation products in soil and natural waters make these investigations possible.     

d-xylose transport by Candida succiphila and Kluyveromyces marxianus

The kinetics and regulation of d-xylose uptake were investigated in the efficient pentose fermentor Candida succiphila, and in Kluyveromyces marxianus, which assimilate but do not ferment pentose sugars. Active high-affinity (K _m ∼ 3.8 mM; V _max ∼ 15 nmol/[mg·min]) and putative facilitated diffusion low-affinity (K _m ∼ 140 mM; V _max ∼ 130 nmol/[mg·min]) transport activities were found in C. succiphila grown, respectively, on xylose or glucose. K. marxianus showed facilitated diffusion low-affinity (K _m ∼ 103 mM; V _max ∼ 190 nmol/[mg·min]) transport activity when grown on xylose under microaerobic conditions, and both a low-affinity and an active high-affinity (K _m ∼ 0.2 mM; V _max ∼ 10 nmol/[mg·min]) transport activity when grown on xylose under fully aerobic conditions.     

Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.     

Evaluation of the immobilized artificial membrane phosphatidylcholine: Drug discovery column for high-performance liquid chromatographic screening of drug–membrane interactions

Chromatographic retention factors (k′) of a series of eight β-adrenoceptor antagonist compounds (β-adrenolytic drugs) were determined employing an immobilized artificial membrane column (IAM.PC.DD). The influence of mobile phase pH, ionic strength, and organic modifier composition was studied in order to examine column performance. After the IAM.PC.DD columns were exposed to approximately 7000 column volumes of a 0.01 M PBS mobile phase, five out of six columns tested showed significant peak broadening and decreased k′ values indicative of premature column failure. The data suggested that the immobilized phospholipids stationary phase was removed by the 0.01 M PBS mobile phase. The β-adrenolytic drug's log k′_IAM values obtained with an IAM.PC.DD column were compared to an ^esterIAM.PC.MG column for predicting drug membrane interactions. For the linear regression analysis between log k′_IAM and the logarithm of the n-octanol–water partition coefficients (r_IAM.PC.DD=0.8710 vs. r_IAM.PC.MG=0.9538), the C₁₈ HPLC retention factors (r_IAM.PC.DD=0.8408 vs. r_IAM.PC.MG=0.9380), the liposome partition coefficients (r_IAM.PC.DD=0.8887 vs. r_IAM.PC.MG=0.9187), and various pharmacokinetic parameters, significantly better correlations were obtained with the ^esterIAM.PC.MG column than the IAM.PC.DD column.