Viability of the antigen determines whether DNA or urocanic acid act as initiator molecules for UV-induced suppression of delayed-type hypersensitivity

UV radiation suppresses the immune response, and UV-induced immune suppression contributes to UV-induced photocarcinogenesis. For UV-induced immune suppression to occur, electromagnetic energy (i.e. UV radiation) must be converted to a biological signal. Two photoreceptors have been identified in the skin that serves this purpose, epidermal DNA and trans-urocanic acid (UCA). Although compelling evidence exists to support a role for each pathway (UV-induced DNA damage or photoisomerization of UCA) in UV-induced immune suppression, it is not clear what determines which photoreceptor pathway is activated. To address this question, we injected UV-irradiated mice with a monoclonal antibody with specificity for cis-UCA or applied liposomes containing DNA repair enzymes to the skin of UV-irradiated mice. The effect that each had on UV-induced suppression of delayed-type hypersensitivity was measured. We asked whether the light source used (FS-40 sunlamps vs solar-simulated UV radiation) altered whichever pathway of immune suppression was activated. Different doses of UV radiation and the viability of the antigen were also considered. Neither the dose of UV nor the light source had any influence on determining which pathway was activated. Rather, we found that the viability of the antigen was the critical determinant. When live antigens were used, UV-induced immune suppression was blocked with monoclonal anti-cis-UCA but not with T4 endonuclease V-containing liposomes. The reverse was observed when formalin-fixed or killed antigens were used. Our findings indicate that antigen viability dictates which photoreceptor pathway predominates after UV exposure.     

Direct determination of the complete set of iron normal modes in a porphyrin-imidazole model for carbonmonoxy-heme proteins: [Fe(TPP)(CO)(1-MeIm)

Detailed Fe vibrational spectra have been obtained for the heme model complex [Fe(TPP)(CO)(1-MeIm)] using a new, highly selective and quantitative technique, Nuclear Resonance Vibrational Spectroscopy (NRVS). This spectroscopy measures the complete vibrational density of states for iron atoms, from which normal modes can be calculated via refinement of the force constants. These data and mode assignments can reveal previously undetected vibrations and are useful for validating predictions based on optical spectroscopies and density functional theory, for example. Vibrational modes of the iron porphyrin-imidazole compound [Fe(TPP)(CO)(1-MeIm)] have been determined by refining normal mode calculations to NRVS data obtained at an X-ray synchrotron source. Iron dynamics of this compound, which serves as a useful model for the active site in the six-coordinate heme protein, carbonmonoxy-myoglobin, are discussed in relation to recently determined dynamics of a five-coordinate deoxy-myoglobin model, [Fe(TPP)(2-MeHIm)]. For the first time in a six-coordinate heme system, the iron-imidazole stretch mode has been observed, at 226 cm(-)(1). The heme in-plane modes with large contributions from the nu(42), nu(49), nu(50), and nu(53) modes of the core porphyrin are identified. In general, the iron modes can be attributed to coupling with the porphyrin core, the CO ligand, the imidazole ring, and/or the phenyl rings. Other significant findings are the observation that the porphyrin ring peripheral substituents are strongly coupled to the iron doming mode and that the Fe-C-O tilting and bending modes are related by a negative interaction force constant.     

A comparison of crystalline- and graft polymer-based chemosensors

Herein, we report a highly sensitive luminescent thin film chemosensor constructed out of a small-molecule donor/acceptor system. Two types of films were compared: one using a small-molecule crystalline donor/acceptor pair and the other using a donor-graft polymer/small-molecule acceptor pair. The acceptor selected for this proof of concept responds to acid, causing its absorption and emission bands to red-shift, which increases spectral overlap with the donor. This increase in overlap greatly enhances energy transfer from the acceptor to the donor. Signal amplification was ascertained by measuring the ratio of acceptor fluorescence when the donor was excited versus direct excitation of the acceptor. Both types of films exhibited large amplification. For the polymeric system, the mechanism of energy migration was investigated by the use of steady-state fluorescence spectroscopy. The mechanism was determined to be dominated by an exciton-hopping process.     

Channel flow cell studies on the evaluation of surface pretreatments using phosphoric acid or polymaleic acid for calcite stone protection

The dissolution kinetics of surface-pretreated and weathered calcite was investigated in dilute acid using a channel flow cell with microdisk detection. Two pretreatments were studied, polymaleic acid and phosphoric acid. Treatment with polymaleic acid was shown to significantly passivate calcite but to a lesser extent than the phosphoric acid and the former coating was found to be less effective for protection of calcite from acid attack. However, treatment of calcite with phosphoric acid resulted in the passivation of calcite from acid attack which strongly inhibited dissolution, an effect that was enhanced even further after exposure to the environment.     

Insulator–metal transition in Nd0.8Na0.2Mn(1−x)CoxO3 perovskites

The electric and magnetic properties of the perovskites Nd_0.8Na_0.2Mn_(1−x)Co_xO₃ (0x0.2) prepared by the usual ceramic procedure were investigated. The insulator-to-metal-like (IM) transition, closely related to a ferromagnetic arrangement, was revealed for the composition of x=0.04 and a similar tendency was detected for x=0. The insulating behavior persists down to low temperatures for higher contents of cobalt ions in spite of the transition to the bulk ferromagnetism. The properties are interpreted in terms of the steric distortion, tilting of the Mn(Co)O₆ octahedra and the double-exchange interactions of the type Mn³⁺–O²⁻–Mn⁴⁺and Mn^3.5+δ–O²⁻–Co²⁺, respectively. Presence of antiferromagnetic domains in the ferromagnetic matrix for the most of cobalt-substituted samples is supposed.     

S-pixyl analogues as photocleavable protecting groups for nucleosides

Several analogues of the 9-phenylthioxanthyl (S-pixyl) photocleavable protecting group have been synthesized, containing substituents on the 9-aryl ring and on the thioxanthyl backbone. Each analogue protected the 5'-hydroxy moiety of thymidine in good to excellent yield. The protected substrates were deprotected in 1:1 water:acetonitrile with irradiation at 300 nm, resulting in recovered thymidine in excellent yield, except for the nitro-substituted analogues which gave substantially lower yields. Substrates with 2,7-dibromo or 3-methoxy substitution on the thioxanthyl backbone were also deprotected efficiently with irradiation at 350 nm. Shorter irradiation times were observed in the less nucleophilic solvent mixture of 1:9 trifluoroethanol:acetonitrile, with no formation of secondary photooxidation products. Photodeprotection with high yields was also achieved in the absence of solvent, with no secondary photoproducts.     

Field evaluations of the VDmax approach for substantiation of a 25 kGy sterilization dose and its application to other preselected doses

The International and European standards for radiation sterilization require evidence of the effectiveness of a minimum sterilization dose of 25 kGy but do not provide detailed guidance on how this evidence can be generated. An approach, designated VD_max, has recently been described and computer evaluated to provide safe and unambiguous substantiation of a 25 kGy sterilization dose. The approach has been further developed into a practical method, which has been subjected to field evaluations at three manufacturing facilities which produce different types of medical devices. The three facilities each used a different overall evaluation strategy: Facility A used VD_max for quarterly dose audits; Facility B compared VD_max and Method 1 in side-by-side parallel experiments; and Facility C, a new facility at start-up, used VD_max for initial substantiation of 25 kGy and subsequent quarterly dose audits. A common element at all three facilities was the use of 10 product units for irradiation in the verification dose experiment.

The field evaluations of the VD_max method were successful at all three facilities; they included many different types of medical devices/product families with a wide range of average bioburden and sample item portion values used in the verification dose experiments. Overall, around 500 verification dose experiments were performed and no failures were observed. In the side-by-side parallel experiments, the outcomes of the VD_max experiments were consistent with the outcomes observed with Method 1.

The VD_max approach has been extended to sterilization doses >25 and <25 kGy; verification doses have been derived for sterilization doses of 15, 20, 30, and 35 kGy. Widespread application of the VD_max method for doses other than 25 kGy must await controlled field evaluations and the development of appropriate specifications/standards.     

Synthesis of a deca-lithium cage containing an [(RN)2As(mu-NR)As(NR)2]4- tetraanion; a homologue of group 15 trianions of the type [E(NR)3]3-

The novel, deca-lithium cage [(mtaNHLi)(As2(Nmta)5)-Li(4).2thf]2 (1) (mtaN = 5-methylthiazolyl, C4H4N2S) contains an imido-bridged tetraanion [(mtaN)2As(mu-Nmta)-As(Nmta)2]4-, which represents a new type of multi-functional imido group 15 ligand framework (homologous with group 15 anions of the type [As(NR)3]3-).     

Toward a microchip-based solid-phase extraction method for isolation of nucleic acids

A silica-based solid-phase extraction system suitable for incorporation into a microchip platform (nu-total analytical system; nu-TAS) would find utility in a variety of genetic analysis protocols, including DNA sequencing. The extraction procedure utilized is based on adsorption of the DNA onto bare silica. The procedure involves three steps: (i) DNA adsorption in the presence of a chaotropic salt, (ii) removal of contaminants with an alcohol/water solution, and (iii) elution of the adsorbed DNA in a small volume of buffer suitable for polymerase chain reaction (PCR) amplification. Multiple approaches for incorporation of this protocol into a microchip were examined with regard to extraction efficiency, reproducibility, stability, and the potential to provide PCR-amplifiable DNA. These included packing microchannels with silica beads only, generating a continuous silica network via sol-gel chemistry, and combinations of these. The optimal approach was found to involve immobilizing silica beads packed into the channel using a sol-gel network. This method allowed for successful extraction and elution of nanogram quantities of DNA in less than 25 min, with the DNA obtained in the elution buffer fraction. Evaluation of the eluted DNA indicated that it was of suitable quality for subsequent amplification by PCR.