Efficient primer strand extension beyond oxadiazole carboxamide nucleobases

Two oxadiazole carboxamide deoxyribonucleoside analogues are described that can be incorporated and efficiently extended by Taq DNA polymerase. The primer strand extension beyond oxadiazole nucleoside analogues occurs at rates similar to the values observed for the canonical Watson-Crick base pairs irrespective of the template nucleobase. These distinctive chemical effects in DNA polymerase extensions are attributed to the smaller size and unique electronic properties of the oxadiazole nucleobase.     

Pyridine-substituted oligopeptides as scaffolds for the assembly of multimetallic complexes: variation of chain length

This paper presents the synthesis and characterization of pyridine-substituted artificial oligopeptides with an aminoethylglycine backbone of varying length, which are designed to act as scaffolds for the self-assembly of multimetallic structures. The identities and purities of the oligopeptides are confirmed with mass spectrometry, (1)H NMR, HPLC, and pH titrations. The acid dissociation constants for the oligopeptides were determined and were found to decrease with increasing pyridine units. Titrations of the oligopeptides with Cu(II) and Pt(II) complexes containing the tridentate ligands 2,2':6',2'-terpyridine and pyridine 2,6-dicarboxylic acid were monitored using UV-visible absorption spectroscopy and showed stoichiometric binding based on the number of pyridines on the peptide strand. Metal titrations performed using an analogous oligopeptide with methyl substituents (in place of the pyridine ligands) showed very weak or no binding. In the case of the oligopeptides containing bound Pt(terpyridine)(2+) complexes, cyclic voltammetry reveals two sequential one-electron reductions at formal potentials that do not vary as a function of oligopeptide length. The measured diffusion coefficients were measured with chronoamperometry and were found to decrease with increasing oliopeptide length.     

Direct N- and C-alkenylation of nitrogen-containing heterocycles with magnesium alkylidene carbenoids

Treatment of magnesium alkylidene carbenoids, which were generated from 1-chlorovinyl p-tolyl sulfoxides with isopropylmagnesium chloride at −78 °C in toluene, with N-lithio nitrogen-containing heterocycles gave N-alkenylated products in moderate to good yields. Also, the reaction of C-lithio indoles, which were generated from N-protected indoles, with magnesium alkylidene carbenoids gave C-2 or C-3 alkenylated products, corresponding to the protective group. The intermediate of these reactions were found to be the alkenyl anion, which could be trapped with electrophiles to give the heterocycles having fully substituted alkenes.     

Forensic classification of ballpoint pen inks using high performance liquid chromatography and infrared spectroscopy with principal components analysis and linear discriminant analysis

Several varieties of blue ballpoint pen inks were analyzed by high performance liquid chromatography (HPLC) and infrared spectroscopy (IR). The chromatographic data extracted at four wavelengths (254, 279, 370 and 400 nm) was analyzed individually and at a combination of these wavelengths by the soft independent modeling of class analogies (SIMCA) technique using principal components analysis (PCA) to estimate the separation between the pen samples. Linear discriminant analysis (LDA) measured the probability with which an observation could be assigned to a pen class. The best resolution was obtained by HPLC using data from all four wavelengths together, differentiating 96.4% pen pairs successfully using PCA and 97.9% pen samples by LDA. PCA separated 60.7% of the pen pairs and LDA provided a correct classification of 62.5% of the pens analyzed by IR. The results of this study indicate that HPLC coupled with chemometrics provided a better discrimination of ballpoint pen inks compared to IR. The need to develop a suitable IR method for analysing blue ballpoint pen inks has been emphasized and it is hoped that the development of such a method would indeed provide a valuable tool for the non-destructive analysis of blue ballpoint pen ink samples for forensic purposes.     

Cross-channel coupling in positron-atom scattering

Coupled-state calculations including positronium channels are reported for positron scattering by atomic hydrogen, lithium and sodium. Integrated cross sections and total cross sections are presented for all three atoms. For lithium differential cross sections are also given. Throughout, comparison is made between results calculated with and without inclusion of the positronium channels. S-wave cross sections for positron scattering by atomic hydrogen in the Ps(1s, 2s, 2p)+H(1s, 2s, 2p) approximation show the high energy resonance first observed by Higgins and Burke in the coupled-static approximation. This resonance has now moved up to 51.05 eV and narrowed in width to 2.92 eV. Other pronounced structure is seen in the S-wave cross sections between 10 and 20 eV; it is tentatively suggested that this structure may be due to the formation of a temporary pseudo-molecular collision complex. Results calculated in the Ps(1s, 2s, , 2p, ,+H(1s, 2s, , 2p, approximation show convergence towards accurate values in the energy region below and in the Ore gap. Contrary to previous work on lithium using only an atomic basis, it is found that coupling to the 3d state of lithium is not so important when positronium channels are included; this is because a mixed basis of atom and positronium states gives a more rapidly convergent approximation than an expansion based on atom states alone. The threshold behaviour of the elastic cross section and the Ps(1s) formation cross section for lithium is investigated. Results in the Ps(1s, 2s, 2p)+Na(3s, 3p) approximation for sodium show good agreement with the total cross section measurements of Kwan et al.     

The formation of cation-ligand complexes of tributylammonium cation with diethyl carbonate,ethylene carbonate,propylene carbonate, 4-butyrolactone,ethyl acetate,and cyclopentanone ino-dichlorobenzene at 25°C

The effects of adding millimolar quantities of a series of compounds containing the carbonyl function on the conductances of solutions (0.2 mM) of tri-n-butylammonium picrate ino-dichlorobenzene solvent at 25°C have been measured. Values of the complex formation constants K ₁ ⁺ for 1:1 cation-ligand complexes are derived from these data. The corresponding values of –G ₁ ⁰ at 25°C are (in kcal-mole ^–1 ): 4-butyrolactone, 4.29; propylene carbonate, 3.87; ethylene carbonate, 3.59; cyclopentanone, 3.42; ethyl acetate, 2.84; and diethyl carbonate, 2.78. These results together with earlier results from this laboratory are discussed in terms of the effects of structure on cation-ligand affinity.     

Synthesis and structure of [(Sn(mu-PCy))3(Na x PMDETA)2], containing an electron-deficient [(Sn(mu-PCy))3]2- dianion

The reaction of CyPHNa with Sn(NMe2)2 in the presence of PMDETA (= (Me2NCH2CH2)2NMe) gives the title compound [(Sn(mu-PCy))3(Na x PMDETA)2] (1), containing an electron-deficient [(Sn(mu-PCy))]3(2-) dianion with a novel two-electron, three centre (2e-3c) bonding arrangement.     

Maximizing the xylitol production from sugar cane bagasse hydrolysate by controlling the aeration rate

Batch fermentations of sugar cane bagasse hemicellulosic hydrolysate treated for removing the inhibitors of the fermentation were performed byCandida guilliermondii FTI20037 for xylitol production. The fermentative parameters agitation and aeration rate were studied aiming the maximization of xylitol production from this agroindustrial residue. The maximal xylitol volumetric productivity (0.87 g/L h) and yield (0.67 g/g) were attained at 400/min and 0.45 v.v.m. (K_La 27/h). According to the results, a suitable control of the oxygen input permitting the xylitol formation from sugar cane bagasse hydrolysate is required for the development of an efficient fermentation process for large-scale applications.     

Characterisation of Sugar Cane Combustion Particles in the Araraquara Region, Southeast Brazil

Biomass burning is an important primary and secondary source of aerosol particles. The presence of carbonaceous particles in the respirable size range makes the study of this fraction important in view of possible health and climatic effects. The annual burning of sugar cane plantations causes emission of huge amounts of pyrogenic particles. Aerosol samples were collected in Araraquara city, São Paulo state, Brazil, during the harvest season for fine and coarse particles and bulk; they were analysed by electron-probe microanalysis, including facilities for low-Z element determination (low-Z EPMA) and by energy-dispersive X-ray fluorescence (EDXRF), in order to investigate the elemental composition of individual particles and bulk samples, respectively. Numerical analysis of the EPMA results by hierarchical clustering shows high contributions of carbonaceous particles that can be distinguished mainly in two different types: biogenic and carbon-rich. Additionally, two significant contributions of aluminosilicate particles were identified: as rather pure aluminosilicates or mixed with carbonaceous species. The EDXRF results are compatible with those of aerosol particles in Amazon, which is nowadays one of the main sources of biogenic particles in the world.     

Solubility of benzil in binary alkane + dibutyl ether solvent mixtures. Comparison of predictive expressions derived from the nearly ideal binary solvent model

Experimental solubilities are reported for benzil dissolved in six binary mixtures containing dibutyl ether with hexane, heptane, octane, cyclohexane, methylcyclohexane, and 2,2,4-trimethylpentane at 25°C. Results of these measurements are compared to the predictions of equations developed previously for solubility in systems of nonspecific interactions. The most successful equation in terms of goodness of fit involved a volume fraction average of the excess Gibbs energies relative to the Flory-Huggins model, and predicted the experimental solubilities in the six systems studied to within an overall average absolute deviation of 3.4% and with a maximum deviation of 6.0%.