Design and Development of Imprinted Polymer Inclusion Membrane‐Based Field Monitoring Device for Trace Determination of Phorate (O,O‐Diethyl S‐Ethyl Thiomethyl Phophorodithioate) in Natural Waters

A biomimetic potentiometric field monitoring device was developed for the trace determination of phorate (O,O‐diethyl S‐ethyl thiomethyl phophorodithioate) in natural waters. The sensing element was fabricated by the inclusion of phorate imprinted polymer materials in the polyvinyl chloride (PVC) matrix. The sensor surface can be reused without conditioning unlike most other conventional sensors. Operational parameters such as amount and nature of plasticizers sensing material, pH and response time were optimized. The response characteristics of the non‐imprinted (NIPIM) and imprinted polymer inclusion membrane (IPIM) sensors for phorate were compared under optimum conditions. The IPIM sensor responds linearly to phorate in the concentration in the ranges 1×10^?9 to 1×10^?6 M and 1×10^?6 to 1×10^?5 M of different slopes with a detection limit of 1×10^?9 M. The selectivity was tested with various common organophosphorous (OP) pesticides and herbicides. In addition to superior sensitivity and selectivity of IPIM over NIPIM‐based sensor, IPIM‐based phorate sensor was found to be stable for 3 months and can be used for more than 40 times without any loss in sensitivity. The applicability for analyzing ground, river and tap‐water samples was successfully demonstrated via recovery studies.     

The crystal and molecular structure of phenothiazine-10-propionic acid

The crystal structure of phenothiazine-10-propionic acid, C₁₂H₈SNC₂H₄COOH, was determined from three-dimensional X-ray diffraction data collected with a manual diffractomer using MoKα (λ 0.71069 Å) radiation. The space group is P2₁/c with a = 7.888 (2)Å, b = 8.703 (2)Å, c = 19.700 (8)Å, β = 101.42 (1)°, Z = 4, D_meas = 1.35(2) g. cm^?3 and D_calc = 1.36 g. cm^?3 at 23°. The structure was determined by the direct method and refined with 500 observed reflections by full-matrix least squares to an R of 0.072. The molecule is folded along the S-N axis and the dihedral angle is 136.5°. The C-S-C angle is 98.5(7)° and the average C-S bond is 1.77(2)Å. The shortening of the C-S bond, the small value of the C-S-C angle and the folding of the molecule are typical of the phenothiazine class of compounds and are assumed to be due to sulfur d orbital participation in ring bonding.     

Intrinsic defects in irradiated and annealed GaAs detected by FTIR

GaAs has been subjected to fast neutron or electron irradiations up to doses of 2×10¹⁹ n cm^–2 and 10¹⁹ e^– cm^–2 respectively and subsequently annealed to temperatures of 500°C. Infrared absorption spectra (20–700 cm^–1), measured at 20 K, show that the induced one-phonon absorption depends on the nature of the radiation. Resonant modes, at 45 cm^–1 and 119 cm^–1, and a broad line at 328 cm^–1 were found in neutron irradiated material, whereas in electron irradiated material only the 45 cm^–1 feature was detected. These spectroscopic features are interpreted as vibrational modes arising from intrinsic defect centres.     

Electrochemistry of unfolded cytochrome c in neutral and acidic urea solutions

The present investigation reports the first experimental measurements of the reorganization energy of unfolded metalloprotein in urea solution. Horse heart cytochrome c (cyt c) has been found to undergo reversible one-electron transfer reactions at pH 2 in the presence of 9 M urea. In contrast, the protein is electrochemically inactive at pH 2 under low-ionic strength conditions in the absence of urea. Urea is shown to induce ligation changes at the heme iron and lead to practically complete loss of the alpha-helical content of the protein. Despite being unfolded, the electron-transfer (ET) kinetics of cyt c on a 2-mercaptoethanol-modified Ag(111) electrode remain unusually fast and diffusion controlled. Acid titration of ferric cyt c in 9 M urea down to pH 2 is accompanied by protonation of one of the axial ligands, water binding to the heme iron (pK(a) = 5.2), and a sudden protein collapse (pH < 4). The formal redox potential of the urea-unfolded six-coordinate His18-Fe(III)-H(2)O/five-coordinate His18-Fe(II) couple at pH 2 is estimated to be -0.083 V vs NHE, about 130 mV more positive than seen for bis-His-ligated urea-denatured cyt c at pH 7. The unusually fast ET kinetics are assigned to low reorganization energy of acid/urea-unfolded cyt c at pH 2 (0.41 +/- 0.01 eV), which is actually lower than that of the native cyt c at pH 7 (0.6 +/- 0.02 eV), but closer to that of native bis-His-ligated cyt b(5) (0.44 +/- 0.02 eV). The roles of electronic coupling and heme-flattening on the rate of heterogeneous ET reactions are discussed.     

Speciation and bioavailability of selenium in yeast-based intervention agents used in cancer chemoprevention studies

This study investigated the speciation and bioavailability of selenium in yeast-based intervention agents from multiple manufacturers from several time points. Sources of selenized yeast included Nutrition 21 (San Diego, CA), which supplied the Nutritional Prevention of Cancer (NPC) Trial from 1981-1996; Cypress Systems (Fresno, CA; 1997-1999); and Pharma Nord (Vejle, Denmark; 1999-2000), which supplied the Prevention of Cancer by Intervention by Selenium (PRECISE) Trial pilot studies. The low-molecular-selenium species were liberated from the samples by proteolytic hydrolysis followed by separation by ion exchange liquid chromatography and detection by inductively coupled plasma-mass spectrometry. The results for the NPC tablets showed that selenomethionine, together with 3 unidentified selenium compounds, were predominant in the sample hydrolysates. The relative amounts of the 4 selenium species varied (p < 0.05) among several of the 7 tablet batches used during the course of the NPC Trial. In comparison, 5 batches of more recently produced selenized yeasts, which were used as a source of selenium in the PRECISE and other trials, contained less of the unknown compounds and more selenomethionine at 54-60% of the total selenium in the yeasts. One batch of yeast, however (from 1985), which originated from the same producer as the yeast used in the NPC tablets, contained only 27% of selenium in the sample as selenomethionine. Human subjects receiving 200 microg selenium/day in the UK PRECISE Pilot Trial showed a higher concentration (p < 0.01) and higher increase from baseline in plasma selenium than did the same dosage used in the NPC Trial. Differences in intake, speciation, or bioavailability of selenium from the yeast-based supplements in the population groups studied may explain this. Furthermore, the selenium concentration in whole blood from the Danish PRECISE Pilot Trial was higher (p < 0.001) than that obtained with synthetic L-selenomethionine in a comparable group of Danes, both groups having been treated with 300 microg selenium/day.     

Localized orbitals for the oxygen and nitric oxide molecules

Localized orbitals are derived for the ground states of the oxygen and nitric oxide molecules by applying localization methods separately to the orbitals containing electrons of alpha- and betaspin. Both the intrinsic energy localization and the uniform localization methods are used. The resulting localized orbitals are in good agreement with the formulae suggested by Linnett.

---

Zusammenfassung Für die Grundzustände der Moleküle O₂ und NO werden lokalisierte Orbitale abgeleitet, indem die Lokalisierungsmethoden getrennt für die Orbitale mit- und-Spin angewendet werden. Dabei werden sowohl die eigentlichen Energielokalisierungsmethoden als auch die gleichförmigen Lokalisierungsmethoden benutzt. Die erhaltenen lokalisierten Orbitale stimmen gut mit den von Linnett vorgeschlagenen Formeln überein.

---

Résumé Obtention d'orbitales localisées pour l'état fondamental des molécules d'oxygène et d'oxyde nitreux par localisation indépendante des orbitales de spin et des orbitales de spin. Emploi simultané de la localisation selon l'énergie intrinsèque et de la localisation uniforme. Les orbitales localisées résultantes sont en bon accord avec les formules suggérées par Linnett.

     

Variable pi-bonding in iron(II) porphyrinates with nitrite, CO, and tert-butyl isocyanide: characterization of [Fe(TpivPP)(NO2)(CO)]-

The addition of the strongly pi-bonding ligands CO or tert-butyl isocyanide to the low-spin five-coordinate iron(II) nitrite species [Fe(TpivPP)(NO2)]- (TpivPP = picket fence porphyrin) gives two new six-coordinate species [Fe(TpivPP)(NO2)(CO)]- and [Fe(TpivPP)(NO2)(t-BuNC)]-. These species have been characterized by single-crystal structure determinations and by UV-vis, IR, and M?ssbauer spectroscopies. All evidence shows that in the mixed-ligand iron(II) porphyrin species, [Fe(TpivPP)(NO2)(CO)]-, the two trans, pi-accepting ligands CO and nitrite compete for pi density. The CO ligand however dominates the bonding. The Fe-N(NO2) bond lengths for the two independent anions in the unit cell at 2.006(4) and 2.009(4) A are lengthened compared to other nitrite species with either no trans ligands or non-pi-accepting trans ligands to nitrite. The Fe-C(CO) bond lengths are 1.782(4) A and 1.789(5) A for the two anions. The two Fe-C-O angles at 175.5(4) and 177.5(4) degrees are essentially linear in both anions. The quadrupole splitting for [Fe(TpivPP)(NO2)(CO)]- was determined to be 0.32 mm/s, and the isomer shift was 0.18 mm/s at room temperature in zero applied field. Both of the M?ssbauer parameters are much smaller than those found for six-coordinate low-spin iron(II) porphyrinates with neutral nitrogen-donating ligands as well as iron(II) nitro complexes. However, the M?ssbauer parameters are typical of other six-coordinate CO porphyrinates signifying that CO is the more dominant ligand. The CO stretching frequency of 1974 cm(-1) is shifted only slightly to higher energy compared to six-coordinate CO complexes with neutral nitrogen-donor ligands trans to CO. Crystal data for [K(222)][Fe(TpivPP)(NO2)(CO)].1/2C6H5Cl: monoclinic, space group P2(1)/c, Z = 8, a = 33.548(6) A, b = 18.8172(15) A, c = 27.187(2) A, beta = 95.240(7) degrees, V = 17091(4) A3.     

The amide rotational barriers in picolinamide and nicotinamide: NMR and ab initio studies

Pyridine carboxamides are a class of medicinal agents with activity that includes the reduction of iron-induced renal damage, the regulation of nicotinamidase activity, and radio- and chemosensitization. Such pharmacological activities, and the prevalence of the carboxamide moiety and the importance of amide rotations in biology, motivate detailed investigation of energetics in these systems. In this study, we report the use of dynamic nuclear magnetic resonance to measure the amide rotational barriers in the pyridine carboxamides picolinamide and nicotinamide. The activation enthalpies and entropies of DeltaH++ = 12.9 +/- 0.3 kcal/mol and DeltaS++ = -7.7 +/- 0.9 cal/mol K for nicotinamide and DeltaH++ = 18.3 +/- 0.4 kcal/mol and DeltaS++ = +1.3 +/- 1.0 cal/mol K for picolinamide report a substantial energetic difference for these regioisomers. Ab initio calculations of the rotational barriers are in good agreement with the experimentally determined values and help partition the 5.4 kcal/mol enthalpy difference into its major contributions. Of principal importance are the variations in steric interactions in the ground states of picolinamide and nicotinamide, superior pi electron donation from the pyridine ring in the transition state of nicotinamide, and an intramolecular hydrogen bond in the ground state of picolinamide.     

High-throughput purification of combinatorial libraries II: Automated separation of single diastereomers from a 4-amido-pyrrolidone library containing intentional diastereomer pairs

A 4-amido-pyrrolidone library that was intentionally synthesized as pairs of diastereomers was produced by solution-phase parallel syntheses and purified by an automated high-throughput purification system. A total of 2592 4-amido-pyrrolidinones were ultimately isolated as single diastereomers from a matrix of 1920 syntheses. After the four-step synthesis and HPLC purification, the average yield of a single diastereomer was 36.6%. The average chemical purity was >90%, and the average diastereomeric purity was >87%. The choice of chiral amines used to make amides with heterocyclic acid chlorides had a dramatic effect on success. Analysis of the relationship between amines used for synthesis and the diastereomeric separation showed that amides made from chiral 1,2-amino alcohols gave superior separation to amides from chiral morpholines. The presence of a hydrogen bond donor on the amide side chain seems to be required for a better diastereomeric separation.     

Silver-phosphine complexes of the highly methylated carborane monoanion [closo-1-H-CB11Me11]-

The synthesis of the silver(I) salt of the highly methylated carborane anion [closo-1-H-CB(11)Me(11)](-) is described, Ag[closo-1-H-CB(11)Me(11)] 1, which in the solid state shows close intermolecular Ag...H(3)C contacts. Addition of various monodentate phosphines to 1 results in the formation of the complexes (R(3)P)Ag[closo-1-H-CB(11)Me(11)] [R = Ph, 2; cyclohexyl (C(6)H(11)), 3; (3,5-Me(2)-C(6)H(3)), 4]. All these complexes show close intermolecular Ag.H(3)C contacts in the solid state that are considerably shorter than the sum of the van der Waals radius of methyl (2.00 A) and the ionic radius of silver(I) (1.29 A). For 2 and 3 there are other close intermolecular Ag...H(3)C contacts in the solid state, arising from proximate carborane anions in the crystal lattice. Addition of methyl groups to the periphery of the phosphine ligand (complex 4) switches off the majority of these interactions, leaving essentially a single cage interacting with the cationic silver-phosphine fragment through three CH(3) groups. In solution (CD(2)Cl(2)) Ag...H(3)C contacts remain, as evidenced by both the downfield chemical shift change and the significant line-broadening observed for the cage methyl signals. These studies also show that the metal fragment is fluxional over the surface of the cage. The Ag...H(3)C interactions in solution may be switched off by addition of a stronger Lewis base than [closo-1-H-CB(11)Me(11)](-). Thus, addition of [NBu(4)][closo-1-H-CB(11)H(5)Br(6)] to 2 affords (Ph(3)P)Ag[closo-1-H-CB(11)H(5)Br(6)], while adding Et(2)O or PPh(3) affords the well-separated ion-pairs [(Ph(3)P)(L)Ag][closo-1-H-CB(11)Me(11)] (L = OEt(2) 5, PPh(3) 6,) both of which have been crystallographically characterized. DFT calculations on 2 (at the B3LYP/DZVP level) show small energy differences between the possible coordination isomers of this compound, with the favored geometry being one in which the [(Ph(3)P)Ag](+) fragment interacts with three of the [BCH(3)] vertices on the lower surface of the cage, similar to the experimentally observed structure of 4.