Solid-state binding of dimethyl sulphoxide involving carboxylic host molecules. X-ray crystal structures of four inclusion species

The crystal structures of four dimethyl sulphoxide (DMSO) inclusion compounds with different carboxylic acid hosts,1–4, have been studied by single crystal X-ray analysis. Crystals of thetrans-9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid inclusion compound (1a), [1 · DMSO (1: 1)] show monoclinic (P2₁/n) symmetry with the unit cell dimensionsa = 11.522(4),b = 18.658(2),c = 8.709(1) Å and = 98.92(2)°. The clathrate of the 9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid (2a), [2 · DMSO (1: 2)] is triclinic (P) with the cell dimensionsa = 15.043(7),b =9.657(4),c = 8.118(7) Å, = 101.81(5), = 96.05(4) and = 100.04(4)°. Triclinic (P) symmetry is shown also by the inclusion compound of 9,10-dihydro-9,10-ethanoanthracene-11-monocarboxylic acid (3a) [3 · DMSO (1:1)] with the cell dimensionsa=6.3132(1),b=7.9846(2),c=17.5314(4) Å, = 96.46(2), = 87.08(2) and = 106.02(2)°. The 9,9-bianthryl-2-monocarboxylic acid clathrate (4a) [4 · DMSO (1:1)] is monoclinic (P2₁/n) and the cell dimensions area = 19.625(18),b = 8.817(1),c = 14.076(8) Å and = 97.92(6)°. In all these structures, the hosts show the same basic recognition pattern for the DMSO guest, involving a strong O-H ... O bond from the COON to the S=O group, and a possible C-H ... O type interaction between the carbonyl O atom of the host and a CH₃ group of the guest. The crystals consist of discrete host-guest aggregates which are mainly held together by weak intermolecular interactions of the Van der Waals' type. The stoichiometries of the aggregates are, however, different.     

New gem-dicyanocyclobutane-containing hydroxyesters

Six new gem-dicyanocyclobutanes containing carbomethoxy and hydroxyl/acetoxy functions were synthesized by cycloaddition of the appropriate vinyl ethers or alkoxystyrenes to methyl β,β-dicyanoacrylate. They proved to be too thermally labile to allow polycondensation to potentially piezoelectric linear polyesters.     

Cu K-edge EXAFS characterisation of copper(I) arenethiolate complexes in both the solid and liquid state: detection of Cu-Cu coordination

Herein we describe a structural characterisation with EXAFS of copper(I) arenethiolate complexes in both the solid and liquid state. Previously noted difficulties in the detection of the Cu-Cu interaction have been attributed to anti-phase behaviour of different Cu-Cu neighbour contributions. A data analysis procedure solely based on EXAFS parameters is presented which resolves these problems. A careful analysis of the individual coordination shells and the use of different k-weightings during the data analysis are shown to be an absolute necessity to obtain reliable results. During R-space fitting, the difference file technique is used to separate, examine and compare the individual contributions. Using this technique their statistical significance and correctness can be determined. Anti-phase behaviour can be detected and accounted for in this way. An additional mixed organocopper aggregate [Cu4(SAr)2(Mes)2] with different Cu sites is analysed, which proves the value of the analysis procedure described above. Moreover, this newly developed EXAFS data analysis procedure is applicable to any other EXAFS spectrum obtained. The structural analysis of these organocopper complexes with EXAFS provides information about their actual structure and dynamic behaviour in solution. The technique can now be used to obtain insights into the reactivity of these complexes and the way in which they form catalytic reaction intermediates.     

Characterisation of Sugar Cane Combustion Particles in the Araraquara Region, Southeast Brazil

Biomass burning is an important primary and secondary source of aerosol particles. The presence of carbonaceous particles in the respirable size range makes the study of this fraction important in view of possible health and climatic effects. The annual burning of sugar cane plantations causes emission of huge amounts of pyrogenic particles. Aerosol samples were collected in Araraquara city, São Paulo state, Brazil, during the harvest season for fine and coarse particles and bulk; they were analysed by electron-probe microanalysis, including facilities for low-Z element determination (low-Z EPMA) and by energy-dispersive X-ray fluorescence (EDXRF), in order to investigate the elemental composition of individual particles and bulk samples, respectively. Numerical analysis of the EPMA results by hierarchical clustering shows high contributions of carbonaceous particles that can be distinguished mainly in two different types: biogenic and carbon-rich. Additionally, two significant contributions of aluminosilicate particles were identified: as rather pure aluminosilicates or mixed with carbonaceous species. The EDXRF results are compatible with those of aerosol particles in Amazon, which is nowadays one of the main sources of biogenic particles in the world.     

Solubility of benzil in binary alkane + dibutyl ether solvent mixtures. Comparison of predictive expressions derived from the nearly ideal binary solvent model

Experimental solubilities are reported for benzil dissolved in six binary mixtures containing dibutyl ether with hexane, heptane, octane, cyclohexane, methylcyclohexane, and 2,2,4-trimethylpentane at 25°C. Results of these measurements are compared to the predictions of equations developed previously for solubility in systems of nonspecific interactions. The most successful equation in terms of goodness of fit involved a volume fraction average of the excess Gibbs energies relative to the Flory-Huggins model, and predicted the experimental solubilities in the six systems studied to within an overall average absolute deviation of 3.4% and with a maximum deviation of 6.0%.     

Pervaporative transport modelling in a ternary system: ethyltertiarybutylether/ethanol/polyurethaneimide

The study deals with the analysis of diffusion and mass transfer modelling during pervaporation in a true ternary system involving a polar liquid mixture (ETBE/EtOH) and a polar block copolymer (polyurethaneimide or PUI). A survey of methods of pervaporative transfer modelling in ternary systems is first developed. From differential permeation experiments carried out with both pure liquids, it appears that both permeants obey a Fickian law. Moreover, the diffusional behaviour is consistent with Long's model, which has thus been assumed for the related ternary system. An extension of the Brun's model is then derived, which takes into account the diffusion coupling as well the significant deviation from sorption ideality. From a practical point of view, the calculated values of fluxes show generally good agreement with the experimental results, although a small deviation occurs for mixtures of low ethanol content. Diffusion coefficients of both pure solvents corresponding to transient or steady state are compared. A very good agreement is found for the aprotic permeant (ETBE). whereas the diffusion coefficient of ethanol in transient state is only the quarter of the value corresponding to steady state. The results are discussed in comparison with related investigations in the literature, involving specific liquid-polymer interactions.     

Activation analysis of alkaline rocks. A comparison between destructive and non-destructive methods

The United States Geological Survey reference sample AGV-1 andesite, and three alkaline rocks from the apatite mine of Jacupiranga, Brasil, were analyzed by thermal neutron activation analysis using destructive and non-destructive methods, and high resolution Ge(Li) gamma-ray detectors. One of the rocks, a carbonatite, was also analyzed by instrumental activation analysis with epithermal neutrons. A greater number of elements can be determined using the radiochemical separation, but the precision and accuracy attained by INAA and RNAA were of the same order for most of the elements analyzed. Epithermal activation was more advantageous for tantalum, terbium and holmium. Comparison of the analytical results for USGS reference sample (AGV-1) with the data published by others gave good agreement. Statistical tests used for comparison of the results of destructive and non-destructive methods, as well as other results are presented.     

A study of method robustness for arsenic speciation in drinking water samples by anion exchange HPLC-ICP-MS

Regulating arsenic species in drinking waters is a reasonable objective, since the various species have different toxicological impacts. However, developing robust and sensitive speciation methods is mandatory prior to any such regulations. Numerous arsenic speciation publications exist, but the question of robustness or ruggedness for a regulatory method has not been fully explored. The present work illustrates the use of anion exchange chromatography coupled to ICP-MS with a commercially available "speciation kit" option. The mobile phase containing 2 mM NaH(2)PO(4) and 0.2 mM EDTA at pH 6 allowed adequate separation of four As species (As(III), As(V), MMAA, DMAA) in less than 10 min. The analytical performance characteristics studied, including method detection limits (lower than 100 ng L(-1) for all the species evaluated), proved the suitability of the method to fulfill the current regulation. Other parameters evaluated such as laboratory fortified blanks, spiked recoveries, and reproducibility over a certain period of time produced adequate results. The samples analyzed were taken from water utilities in different areas of the United States and were provided by the U.S. EPA. The data suggests the speciation setup performs to U.S. EPA specifications but sample treatment and chemistry are also important factors for achieving good recoveries for samples spiked with As(III) as arsenite and As(V) as arsenate.     

A new approach for the sequential injection spectrophotometric determination of the total antioxidant activity

A sequential injection system based on the ABTS (2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulphonic-acid) methodology was developed. The proposed method, incorporating a mixing chamber in the side port of the selection valve, was evaluated to measure the total antioxidant activity of several beverages and foods.The ABTS⁺ is generated by oxidation of ABTS with potassium persulfate and is reduced in presence of hydrogen-donating antioxidants converting into a colourless product. The applicability of the developed method was tested by measurement of the antioxidant activity of pure compounds as well as by analysing complex food and beverage samples. The antioxidant activity was presented as l(+) ascorbic acid equivalence. The values obtained by this methodology were not significantly different from the results obtained by the original spectrophotometric ABTS assay. For most of the studied antioxidants, antioxidant activity varied with pH and dilution. The proposed SIA system is suitable for screening direct or diluted total antioxidant activity of pure compounds or food samples.     

Electrochemical behavior of ellipticine derivatives: Part III. Reduction of 2-methyl-ellipticinium cations and their conjugated bases

In neutral DMF, ellipticinium cations 9 R—E⁺H—2 CH₃ undergo a reversible 1 e addition (standard potential ca. ?1.35 V) to yield a neutral radical which rapidly dimerizes (dimerization rate constant ca. 10⁷ mol^?1 1 s^?1). In basic DMF or in the presence of superoxide anion, the corresponding conjugated bases undergo a reversible 1 e addition accompanied by a fast and reversible proton addition (standard potential at pH_DMF 0 ca. ?0.52 V) to yield the same neutral radical. R being H, OCH₃ or OH, there is no effect of the substituent at the C-9 position on the electrochemical process.