The synthesis of 5,8-difluoronaphtho[2,3-c]thiophene-4,9-dione and its facile conversion to 2-[2-(dimethylamino)ethyl]- 5-[2-(dimethylamino)ethylamino]-8-fluoro-naphtho[2,3-c] pyrrole-4,9-dione

The synthesis of 5,8-difluoronaphtho[2,3-c]thiophene-4,9-dione ( 2a ) has been accomplished. Treatment of 2a with 2,2-dimethylaminoethylamine leads to 2-[2-(dimethylamino)ethyl]-5-[2-(dimethylamino)ethylamino]-8-fluoronaphtho[2,3-c]pyrrole-4,9-dione ( 6 ).     

Characterisation and proposed origin of mass spectrometric ions observed 30 Th above the ionised molecules of per-O-methylated carbohydrates

Derivatisation of carbohydrates by permethylation significantly improves the mass spectrometric intensity of carbohydrate-derived ions and allows more readily interpretable fragmentation; in addition, samples are conveniently separated from salts, and larger oligosaccharides are more readily ionised. It has previously been recognised that, in the mass spectra of permethylated carbohydrates, a series of ions indicating species 30 Da larger than the fully methylated carbohydrate molecules are also observed. These species have not been characterised in the literature despite their apparently ubiquitous occurrence in the mass spectra of permethylated carbohydrates. Tandem mass spectrometry (MS/MS) experiments were performed on permethylated carbohydrates and reduced permethylated carbohydrates that exhibit the artefact, demonstrating that the artefact is not reducing terminal specific, and that the artefact can be introduced at any hydroxyl residue. It was further demonstrated through the use of different alkylation reagents that the origin of this artefact group is the alkylating reagent itself. It is proposed that side reactions that occur between the permethylation reagents allow the production of small amounts of iodomethyl methyl ether. This reagent can then compete with methyl iodide for reaction with the carbohydrate -OH groups. The result is partial incorporation of a methoxymethyl moiety instead of a methyl group, detected as '+30' artefact ions.     

Insight into the reactivity of olefins in the Pauson-Khand reaction

The reactivity of different Co(2)(CO)(6)-acetylene complexes in the Pauson-Khand reaction is strongly dependent on the nature of the olefin. Theoretical calculations at both the DFT and ONIOM levels are concordant with experimental observations and suggest how the olefin-cobalt interactions in the complex could have a major effect on the relative reactivity of the olefins. This study rationalizes for the first time the experimentally observed reactivity differences of cyclohexene, cyclopentene, and norbornene.     

A multitechnique surface analytical study of a segmented block copolymer poly(ether-urethane) modified through an H2O radio frequency glow discharge

Recent work in our laboratories has fully characterized the surface region of a segmented poly(ether-urethane) (PEU) extending from the air/polymer interfacial region through bulk depths in the micron range. This characterization utilized energy and angle dependent Electron Spectroscopy for Chemical Analysis (ESCA), Attenuated Total Reflectance–Fourier Transform Infrared Spectroscopy (ATR–FTIR), and Comprehensive Wettability Profiling (contact angle using a homologous series of liquids) as defined by Zisman. In this study this same multi-analytical-technique approach is used to elucidate changes in these PEU surfaces induced through an H₂O Radio Frequency Glow Discharge (RFGD) plasma. This investigation reports both qualitative and quantitative changes due to the modification treatments as well as the permanency of the changes effected on these surfaces through the plasma treatment. From our analyses, the amount of surface residing polyurethane (hard segment) is observed to increase due to a proposed plasma etching mechanism. Further, the addition of oxygen containing functionality is detected at the modified surfaces unique with respect to the unmodified PEU. These surface modifications which show large increases in wettability, are finally observed to be semi-permanent over a time period of 6 months.     

On the determination of crystallinity and cellulose content in plant fibres

A comparative study of cellulose crystallinity based on the sample crystallinity and the cellulose content in plant fibres was performed for samples of different origin. Strong acid hydrolysis was found superior to agricultural fibre analysis and comprehensive plant fibre analysis for a consistent determination of the cellulose content. Crystallinity determinations were based on X-ray powder diffraction methods using side-loaded samples in reflection (Bragg-Brentano) mode. Rietveld refinements based on the recently published crystal structure of cellulose Iβ followed by integration of the crystalline and amorphous (background) parts were performed. This was shown to be straightforward to use and in many ways advantageous to traditional crystallinity determinations using the Segal or the Ruland–Vonk methods. The determined cellulose crystallinities were 90–100 g/100 g cellulose in plant-based fibres and 60–70 g/100 g cellulose in wood based fibres. These findings are significant in relation to strong fibre composites and bio-ethanol production.     

Simultaneous determinations of a monofluorinated imidazo[1, 5-a] [1, 4] benzodiazepine and the corresponding benzophenone as a function of pH and in aqueous formulations by 19F nuclear magnetic resonance spectrometry

8-Chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1, 5-a] [1, 4 ]benzodiazepine (called “midazolam”) exists in equilibrium with the corresponding benzophenone (the“open-Mng form”). The two compounds were determined simultaneously as a function of pH with ¹⁹F-n.m.r. spectrometry. In a unique application of ¹⁹F-n.m.r. spectrometry, the compounds are determined simultaneously in aqueous dosage forms without the need for sample preparation. The optimum signal-to-noise ratio for the major compound for the lowest concentration of sample used (≈ 1 mg ml^-1) was 200:1 for 3000 scans. This was obtained by partial proton decoupling and exponential multiplication of the free induction decay with a line-broadening parameter of 12 Hz. Quantitative results are presented with a standard deviation of < 2.0% in the mean ratio of the two compounds. The results are also compared with those obtained by the spectrophotometric fluorescamine method. Advantages of the ¹⁹F-n.m.r. technique in this determination are discussed.     

INHIBITION OF PHOTOTAXIS IN Volvox aureus BY NATURAL AND SIMULATED SOLAR ULTRAVIOLET LIGHT

Exposure to artificial UV wavelengths and the UV component of sunlight delays positive phototaxis in the green alga Volvox aureus. Broad band wavelength filters were used to modify the output from UV-B sources (280-320 nm) and natural sunlight. The delay in phototaxis by artificial UV is increased with exposure to shorter UV-B wavelengths. Natural sunlight experiments were performed with exposure to full sunlight and to its UV component only. The UV component present in summer sunlight produced long periods of inhibition in phototaxis and even lethality, while exposure to the total spectrum of sunlight had no significant effects on movement or survival. The data indicate that although this species of alga is well equipped to deal with present levels of UV exposure, increases in the short UV-B wavelengths in sunlight may force an alteration in patterns of photomovement.     

A general organocatalyst for direct alpha-functionalization of aldehydes: stereoselective C-C, C-N, C-F, C-Br, and C-S bond-forming reactions. Scope and mechanistic insights

The development of a general organocatalyst for the alpha-functionalization of aldehydes, via an enamine intermediate, is presented. Based on optically active alpha,alpha-diarylprolinol silyl ethers, the scope and applications of this catalyst for the stereogenic formation of C-C, C-N, C-F, C-Br, and C-S bonds are outlined. The reactions all proceed in good to high yields and with excellent enantioselectivities. Furthermore, we will present mechanistic insight into the reaction course applying nonlinear effect studies, kinetic resolution, and computational investigations leading to an understanding of the properties of the alpha,alpha-diarylprolinol silyl ether catalysts.     

Disorder effects in Mn12–acetate at 83 K

The structure of hexadeca‐μ‐acetato‐tetra­aqua­dodeca‐μ₃‐oxo‐dodecamanganese bis(acetic acid) tetrahydrate, [Mn₁₂O₁₂(CH₃COO)₁₆(H₂O)₄]·2CH₃COOH·4H₂O, known as Mn₁₂–acetate, has been determined at 83 (2) K by X‐ray diffraction methods. The fourfold (S₄) molecular symmetry is disrupted by a strong hydrogen‐bonding interaction with the disordered acetic acid mol­ecule of solvation, which displaces one of the acetate ligands in the cluster. Up to six Mn₁₂ isomers are potentially present in the crystal lattice, which differ in the number and arrangement of hydrogen‐bonded acetic acid mol­ecules. These results considerably improve the structural information available on this molecular nanomagnet, which was first synthesized and characterized by Lis [Acta Cryst. (1980), B 36 , 2042–2046].     

In situ determination of adsorption kinetics of proteins in a finite bath

A method for fast in situ measurement of adsorption kinetics based on a finite bath was developed. We modified the conventional finite bath by replacing the external loop by a dip probe which enables in situ measurement of the concentration change in the contactor. Deposition of adsorbent particles on the reflection surface of the dip probe compromised measurements. Different membranes, a polyamide, a polypropylene and a nylon membrane were tested to protect the internal reflection surface of the dip probe from fouling with adsorbent particles. The nylon membrane provided efficient protection and high mass transfer evaluated by response time experiments. Unspecific adsorption of the model protein on the membrane could also be excluded. To corroborate the measurements of the dip probe the results were compared to a conventional finite bath and to a shallow-bed. The uptake curves for human polyclonal IgG at different concentrationes (0.1-3 g/l) on rProtein A Sepharose FF and MabSelect were used as model system. The effective diffusion coefficients were determined using a pore diffusion model. These values were in good agreement for all methods.