Phytochemical Investigation of New Algerian Lichen Species: Physcia Mediterranea Nimis

The present study provides new data concerning the chemical characterisation of Physcia mediterranea Nimis, a rare Mediterranean species belonging to the family Physciaceae. The phytochemical screening was carried out using GC-MS, HPLC-ESI-MS-MS, and NMR techniques. Hot extraction of n-hexane was carried out, followed by separation of the part insoluble in methanol: wax (WA-hex), from the part soluble in methanol (ME-hex). GC-MS analysis of the ME-hex part revealed the presence of methylbenzoic acids such as sparassol and atraric acid and a diterpene with a kaurene skeleton which has never been detected before in lichen species. Out of all the compounds identified by HPLC-ESI-MS-MS, sixteen compounds are common between WA-hex and ME-hex. Most are aliphatic fatty acids, phenolic compounds and depsides. The wax part is characterised by the presence of atranorin, a depside of high biological value. Proton 1H and carbon 13C NMR have confirmed its identification. Atranol, chloroatranol (depsides compound), Ffukinanolide (sesquiterpene lactones), leprolomin (diphenyl ether), muronic acid (triterpenes), and ursolic acid (triterpenes) have also been identified in ME-hex. The results suggested that Physcia mediterranea Nimis is a valuable source of bioactive compounds that could be useful for several applications as functional foods, cosmetics, and pharmaceuticals.     

Synthesis and anticancer activity of novel quinazolinone and benzamide derivatives

Research on Chemical Intermediates - In trying to develop new anticancer agents, a series of quinazolinone and benzamide derivatives were synthesized via reaction of...     

Biochar of Spent Coffee Grounds as Per Se and Impregnated with TiO2: Promising Waste-Derived Adsorbents for Balofloxacin

Biochars (BC) of spent coffee grounds, both pristine (SCBC) and impregnated with titanium oxide (TiO₂@SCBC) were exploited as environmentally friendly and economical sorbents for the fluroquinolone antibiotic balofloxacin (BALX). Surface morphology, functional moieties, and thermal stabilities of both adsorbents were scrutinized using SEM, EDS, TEM, BET, FTIR, Raman, and TG/dT analyses. BET analysis indicated that the impregnation with TiO₂ has increased the surface area (50.54 m²/g) and decreased the pore size and volume. Batch adsorption experiments were completed in lights of the experimental set-up of Plackett-Burman design (PBD). Two responses were maximized; the % removal (%R) and the adsorption capacity (q_e, mg/g) as a function of four variables: pH, adsorbent dosage (AD), BALX concentration ([BALX]), and contact time (CT). %R of 68.34% and 91.78% were accomplished using the pristine and TiO₂@SCBC, respectively. Equilibrium isotherms indicated that Freundlich model was of a perfect fit for adsorption of BALX onto both adsorbents. Maximum adsorption capacity (q_max) of 142.55 mg/g for SCBC and 196.73 mg/g for the TiO₂@SCBC. Kinetics of the adsorption process were best demonstrated using the pseudo-second order (PSO) model. The adsorption-desorption studies showed that both adsorbents could be restored with the adsorption efficiency being conserved up to 66.32% after the fifth cycles.     

Poly(ester-amide)s Derived From Adipic Acid, 1,4-Butanediol and β-Alanine: Synthesis and Characterization

A series of polyesteramides (PEAs) differing in their amide/ester ratio, within a range of molar composition from 90/10 to 10/90, have been synthesized by a direct melt polycondensation of 1,4-butanediol, adipic acid and β-alanine. Their structure was fully characterized by FTIR and NMR spectroscopy. The resulting copolymers are amorphous, they are thermally stable to temperatures up to 330°C, and present increasing glass transition temperatures at increasing amide content.     

Synthesis,structure elucidation,DNA binding and molecular docking studies of novel copper(II) complexes of two 1,3,4-thiadiazolethiosemicarbazone derivatives

Four novel Cu(II) chelates were synthesized by reacting hydrated CuCl₂ and Cu(CH₃COO)₂ with two derivatives of 1,3,4-thiadiazolethiosemicarbazone. The structures and geometries of the synthesized complexes were deduced applying the alternative analytical and spectral tools confirming the complexes to have the formulae [(LH)Cu(Cl)]•0.5H₂O, [(LH)Cu(OAc)(H₂O)₂]•0.5H₂O, [(LCl)Cu(Cl)(H₂O)₂]•H₂O and [(LCl)Cu(OAc)]; where LH and LCl are phenyl and p-chlorophenyl derivatives of 1,3,4-thiadiazolethiosemicarbazone ligands, respectively (deprotonated form). IR spectral data confirmed the coordination of the ligands to the copper center as monobasic tridentate in the thiol form. Thermal analysis, UV–Vis spectra and magnetic moment assured the geometry around the copper center to be square planar, trigonal bipyramid and octahedral which have been confirmed by the computational studies. The two ligand derivatives and their copper complexes were applied to evaluate their binding modes with SS-DNA via UV–Vis spectral titration and viscosity measurements. The DNA-binding constant (k_b) values of the investigated derivatives were calculated and compared with ethidium bromide in order to assess their mode of binding with DNA. Moreover, docking study of these complexes was carried out to recognize the drug–DNA interactions and to calculate their binding energies.     

Multiple-reaction monitoring liquid chromatography mass spectrometry for monosaccharide compositional analysis of glycoproteins

A simple, sensitive, and rapid quantitative LC-MS/MS assay was designed for the simultaneous quantification of free and glycoprotein bound monosaccharides using a multiple reaction monitoring (MRM) approach. This study represents the first example of using LC-MS/MS methods to simultaneously quantify all common glycoprotein monosaccharides, including neutral and acidic monosaccharides. Sialic acids and reduced forms of neutral monosaccharides are efficiently separated using a porous graphitized carbon column. Neutral monosaccharide molecules are detected as their alditol acetate anion adducts [M + CH₃CO₂]⁻ using electrospray ionization in negative ion MRM mode, while sialic acids are detected as deprotonated ions [M − H]⁻. The new method exhibits very high sensitivity to carbohydrates with limits of detection as low as 1 pg for glucose, galactose, and mannose, and below 10 pg for other monosaccharides. The linearity of the described approach spans over three orders of magnitudes (pg to ng). The method effectively quantified monosaccharides originating from as little as 1 μg of fetuin, ribonuclease B, peroxidase, and α ₁-acid glycoprotein human (AGP) with results consistent with literature values and with independent CE-LIF measurements. The method is robust, rapid, and highly sensitive. It does not require derivatization or postcolumn addition of reagents.     

Polarographic chemometric determination of zinc and nickel in aqueous samples

Polarographic chemometric methods were applied to the determination of zinc and nickel in aqueous solutions previously acidified with 0.1 M acetate buffer (pH 4.2). The studied methods are multivariate methods including classical least squares (CLS), principal component regression (PCR) and partial least squares (PLS); derivative ratio methods (first, ¹D and second, ²D derivative ratio). A comparative study was considered. The studied chemometric methods do not need the presence of any reduction potential shift reagent in spite of the great overlap between the two metals polarograms. A training set consisting of 10 binary mixture solutions in the possible combinations containing 0.13–9.30 μg/ml Zn(II) and 0.20–12.25 μg/ml Ni(II) was used to develop the chemometric calibrations (CLS, PCR and PLS). A validation set containing the synthetic mixtures in the range of 0.29–9.00 μg/ml for Zn(II) and 0.30–11.60 μg/ml for Ni(II) was used to validate the multivariate calibrations. Same mixtures were used to develop the derivative ratio methods. The polarograms were recorded and their current values were measured within the potential range −920 to −1052 mV at 2 mV intervals. The mean percentage recoveries obtained using CLS, PCR and PLS were found to be 99.5 ± 1.5%, 100.0 ± 1.1% and 100.0 ± 1.0% for Zn(II) and 99.4 ± 1.3%, 99.7 ± 1.2% and 99.9 ± 1.0% for Ni(II), respectively. The mean percentage recoveries obtained using ¹D at −950 mV, ¹D at −1010 mV, ¹D at −950 mV–¹D at −1010 mV and ²D at −986 mV for Zn(II) were found to be 99.7 ± 1.2%, 99.2 ± 1.6%, 99.4 ± 1.4% and 99.4 ± 1.4%; and using ¹D at −1030 mV and ²D at −1010 mV for Ni(II) were found to be 100.5 ± 1.3% and 100.4 ± 1.3%, respectively. Interferences due to the presence of Cd, Co, Pb, Fe, Mn, Ca, Mg, Cu and Al were studied. The applicability of the proposed methods was assessed through the determination of both metals in tap drinking-water. Samples were subjected if required up to a 20-fold preconcentration step by microwaving in pyrex vessels. The results were compared with those obtained using the zincon and the heptoxime colorimetric reference methods for the determination of zinc and nickel, respectively.     

Synthesis and Reactions of Some New Benzo[a]phenothiazine‐3,4‐dione Derivatives

The reaction of 2,3‐dihydro‐2,3‐epoxy‐1,4‐naphthoquinone ( 4 ) with substituted anilines furnished the corresponding benzo[fused]heterocyclic derivatives 5 , 6 , 6a , 6b , 7 , 8 . Furthermore, treatment of benzo[a]phenothiazine derivative 7 with halo compounds, namely, ethyl bromoacetate, phenacyl bromide, dibromoethane, or chloroacetone afforded ether derivatives 11 , 12 , 13 , 14 , respectively. Moreover, the reaction of 11 with o‐substituted aniline gave the corresponding benzo[a]phenothiazin‐5‐one derivatives 15 , 16 , 17 and benzo[d][1,3]oxazin‐4‐one 18 , respectively. Finally, the chromenone derivative 19 was synthesized via the reaction of ester derivative 11 with salicyaldhyde in refluxing pyridine. The newly synthesized compounds were characterized by spectroscopic measurements (IR, ¹H NMR, ¹³C NMR, and mass spectra).     

A novel lophine-based fluorescence probe and its binding to human serum albumin

The binding of a lophine-based fluorescence probe, 4-[4-(4-dimethylaminophenyl)-5-phenyl-1H-imidazol-2-yl]benzoic acid methyl ester (DAPIM) with human serum albumin (HSA) was investigated by fluorescence spectroscopy under physiological conditions. While DAPIM shows extreme low fluorescence in aqueous solution, DAPIM binding with HSA emits strong fluorescence at 510 nm. The binding constant and binding number determined by Scatchard plot was 3.65 × 10⁶ M⁻¹ and 1.07, respectively. Competitive binding between DAPIM and other ligands such as warfarin, valproic acid, diazepam and oleic acid, were also studied fluorometrically. The results indicated that the primary binding site of DAPIM to HSA is site II at subdomain IIIA. DAPIM can be a useful fluorescence probe for the characterization of drug-binding sites. In addition to the interaction study, because the fluorescence intensity of DAPIM increased in proportion to HSA concentration, its potential in HSA assay for serum sample was also evaluated.