New pyranosyl cembranoid diterpenes from Sarcophyton trocheliophorum

During our continual searching programme for novel bioactive metabolites from Sarcophyton trocheliophorum, collected from Red Sea, we describe herein the isolation and structural elucidation of further two new pyrane-based cembranoid diterpenes: 9-hydroxy-7,8-dehydro-sarcotrocheliol (1) and 8,9-expoy-sarcotrocheliol acetate (2), along with the well-known sarcotrocheliol acetate (3), (+)-sarcophine (4), (+)-sarcophytoxide (5) and (-)-sarcophytoxide (6). The chemical structures of compounds 1 and 2 were determined on the basis of 1D and 2D NMR (¹H, ¹³C, ¹H–¹H COSY, HMQC, HMBC and NOE), mass spectra (ESI and HR-ESIMS) and by comparison with related structures. The antimicrobial activities of the reported compounds 1–6 were investigated. According to the molecular docking study of compounds 1–6 using 3D structure of α,β tubulin in complex with taxol (PDB code 1JFF) and epothilone A (PDB code 1TVK), sarcophine (4) displayed the highest affinity towards both crystal structures, followed by 5 and 6, meanwhile pyrane-based cembranoid diterpenes (1–3) showed less affinity.     

Mangostanaxanthone VIII,a new xanthone from Garcinia mangostana and its cytotoxic activity

A new prenylated xanthone, mangostanaxanthone VIII (7) and six known metabolites: gartanin (1), 1,3,8-trihydroxy-2-(3-methyl-2-butenyl)-4-(3-hydroxy-3-methylbutanoyl)-xanthone (2), rubraxanthone (3), 1,3,6,7-tetrahydroxy-8-prenylxanthone (4), garcinone C (5), and xanthone I (9-hydroxycalabaxanthone) (6) were separated from the EtOAc-soluble fraction of the air-dried pericarps of Garcinia mangostana (Clusiaceae). Their structures have been verified on the basis of spectroscopic data analysis as well as comparison with the literature. The cytotoxic activity of 7 was assessed against MCF7, A549, and HCT116 cell lines using sulforhodamine B (SRB) assay. Compound 7 showed significant cytotoxic potential against MCF7 and A549 cell lines with IC₅₀s 3.01 and 1.96 μM, respectively compared to doxorubicin (0.06 and 0.44 μM, respectively). However, it exhibited moderate activity towards HCT116 cell line.     

Development of nanomaterial chemosensors for toxic metal ions sensing

Heavy metal ions are harmful to aquatic life and humans owing to their high toxicity and non‐biodegradability, so their removal from wastewater is an important task. Therefore, this work focuses on designing suitable, simple and economical nanosensors to detect and remove these metal ions with high selectivity and sensitivity. Based on this idea, different types of mesoporous materials such as hexagonal SBA‐15, cubic SBA‐16 and spherical MCM‐41, their chloro‐functionalized derivatives, as well as 4‐(4‐nitro‐phenylazo)‐naphthalen‐1‐ol (NPAN) azo dye have been synthesized, with the aim of designing some optical nanosensors for metal ions sensing applications. The mentioned azo dye has been anchored into the chloro‐functionalized mesoporous materials. The designed nanosensors were characterized using scanning and transmission electron microscopy as well as Fourier transform infrared and UV–visible spectral analysis, nitrogen adsorption–desorption isotherms, low‐angle X‐ray diffraction and thermogravimetric analyses. Their optical sensing to various toxic metal ions such as Cd (II), Hg (II), Mn (II), Fe (II), Zn (II) and Pb (II) at different values of pH (1.1, 4.9, 7 and 12) was investigated. The optimization of experimental conditions, including the effect of pH and metal ion concentration, was examined. The experimental results showed that the solution pH had a major impact on metal ion detection. The optical nanosensors respond well to the tested metal ions, as reflected by the enhancement in both absorption and emission spectra upon adding different concentrations of the metal salts and were fully reversible on adding ethylene diamine tetra acetic acid or citric acid to the formed complexes. High values of the binding constants for the designed nanosensors were observed at pHs 7 and 12, confirming the strong chelation of different metals to the nanosensor at these pHs. Also, high binding constants and sensitivity were observed for NPAN‐MCM‐41 as a nanosensor to detect the different metal ions. From the obtained results, we succeeded in transforming the harmful azo dye into an environmentally friendly form via designing of the optical nanosensors used to detect toxic metal ions in wastewater with high sensitivity.     

Buprofezin dissipation and safety assessment in open field cabbage and cauliflower using GC/ITMS employing an analyte protectant

An analytical method for the determination of buprofezin residues in cabbage and cauliflower was developed and validated using gas chromatography with ion trap mass spectrometry. The analyte protectant d ‐sorbitol was used at a concentration level of 0.5 mg mL^?1 in acetonitrile instead of in matrix for constructing the calibration curves of the buprofezin standard. The average recoveries ranged from 91.3 to 96.8%, with an RSD of ≤2.7%. The limits of detection and quantitation of the method in cabbage and cauliflower were 1.3, 1.7 and 4.3, 6.2 μg kg^?1, respectively. The residual levels and dissipation kinetics of buprofezin 25% wettabe powder in cabbage and cauliflower cultivated under open field conditions was investigated at the single (T1) and double (T2) recommended rates of application. Half‐life periods were found to be 1.73 and 2.1 days in cabbage, whereas in cauliflower, these values were 1.85 and 2.36 days at T1 and T2, respectively. Based on the dissipation study, and the maximum residue limit value of 0.05 mg kg^?1, the proposed pre‐harvest interval of buprofezin in cabbage was 3–6 days and that in cauliflower was 4–10 days. The results showed that buprofezin is safe for application at both recommended application rates.     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092     

Thermodynamic perturbation theory for fused sphere hard chain fluids using nonadditive interactions

A model is developed for the equation of state of fused chains based on Wertheim thermodynamic perturbation theory and nonadditive size interactions. The model also assumes that the structure (represented by the radial distribution function) of the fused chain fluid is the same as that of the touching hard sphere chain fluid. The model is completely based on spherical additive and nonadditive size interactions. The model has the advantage of offering good agreement with simulation data while at the same time being independent of fitted parameters. The model is most accurate for short chains, small values of Delta (slightly fused spheres) and at intermediate (liquidlike) densities.     

Bacterial iron transport: coordination properties of azotobactin, the highly fluorescent siderophore of Azotobacter vinelandii

Azotobacter vinelandii, a nitrogen-fixing soil bacterium, secretes in iron deficiency azotobactin delta, a highly fluorescent pyoverdin-like chromopeptidic hexadentate siderophore. The chromophore, derived from 2,3-diamino-6,7 dihydroxyquinoline, is bound to a peptide chain of 10 amino acids: (L)-Asp-(D)-Ser-(L)-Hse-Gly-(D)-beta-threo-HOAsp-(L)-Ser-(D)-Cit-(L)-Hse-(L)-Hse lactone-(D)-N(delta)-Acetyl, N(delta)-HOOrn. Azotobactin delta has three different iron(III) binding sites which are one hydroxamate group at the C-terminal end of the peptidic chain (N(delta)-Acetyl, N(delta)-HOOrn), one alpha-hydroxycarboxylic function in the middle of the chain (beta-threo-hydroxyaspartic acid), and one catechol group on the chromophore. The coordination properties of its iron(III) and iron(II) complexes were measured by spectrophotometry, potentiometry, and voltammetry after the determination of the acid-base functions of the uncomplexed free siderophore. Strongly negatively charged ferric species were observed at neutral p[H]'s corresponding to a predominant absolute configuration Lambda of the ferric complex in solution as deduced from CD measurements. The presence of an alpha-hydroxycarboxylic chelating group does not decrease the stability of the iron(III) complex when compared to the main trishydroxamate siderophores or to pyoverdins. The value of the redox potential of ferric azotobactin is highly consistent with a reductive step by physiological reductants for the iron release. Formation and dissociation kinetics of the azotobactin delta ferric complex point out that both ends of this long siderophore chain get coordinated to Fe(III) before the middle. The most striking result provided by fluorescence measurements is the lasting quenching of the fluorophore in the course of the protonation of the ferric azotobactin delta complex. Despite the release of the hydroxyacid and of the catechol, the fluorescence remains indeed quenched, when iron(III) is bound only to the hydroxamic acid, suggesting a folded conformation at this stage, around the metal ion, in contrast to the unfolded species observed for other siderophores such as ferrioxamine or pyoverdin PaA.     

Physical,chemical and biological studies on transition metal complexes of chelating tridentate ligand

Summary The interaction of 1-benzoin-4-phenylthiosemicarbazone (H₂ BPS) with some transition metal ions has been investigated. The ligand can function as a tridentate chelating agent, giving M(HBPS)₂ and M(BPS). Potentiometric studies proved that the mechanism of chelation is based on hydrogen ion liberation. Spectral studies in solution show that the ligand could be used for the microdetermination of Cu^IIions. On the basis of magnetic and spectral data, an octahedral structure is proposed for the Co^II and Ni^II complexes and a square-planar structure for the Cu^II complex. The corrosion inhibition of aluminium in Cl₃CCO₂H using H₂BPS is studied. The electrical conductivity of H₂BPS and of its complexes have been measured. The ligand shows an activation energy in the range of semiconducting materials. The antimicrobial activity of all compounds has also been demonstrated.     

Chemistry of Phosphorus Ylides. Part 34 Synthesis of Chromenone Phosphanylidene and Cyclobutylidene Derivatives

Abstract

The reaction of nucleophilic phosphacumulene ylides with visnaginone and khellinone afforded the corresponding phosphanylidene and furochromene derivatives. Moreover, pyranochromenes were obtained from the reaction of chromene carbaldehydes with phosphacumulenes. On the other hand, the phosphanylidene-cyclobutylidenes and their dimers were produced from the reaction of furochromene carbaldehydes with the same phosphonium reagents.