Impact of Heteroatom Substitution on Dual-State Emissive Rigidified 2-(2’-hydroxyphenyl)benzazole Dyes: Towards Ultra-Bright ESIPT Fluorophores**

2-(2’-Hydroxyphenyl)benzazole (HBX) fluorophores are well-known excited-state intramolecular proton transfer (ESIPT) emitters largely studied for their synthetic versatility, photostability, strong solid-state fluorescence and ability to engineer dual emission, thus paving the way to applications as white emitters, ratiometric sensors, and cryptographic dyes. However, they are heavily quenched in solution, due to efficient non-radiative pathways taking place as a consequence of the proton transfer in the excited-state. In this contribution, the nature of the heteroring constitutive of these rigidified HBX dyes was modified and we demonstrate that this simple structural modification triggers major optical changes in terms of emission color, dual emission engineering, and importantly, fluorescent quantum yield. Investigation of the photophysical properties in solution and in the solid state of a series of ethynyl-TIPS extended HBX fluorophores, along with ab initio calculations demonstrate the very promising abilities of these dyes to act as bright dual-state emitters, in both solution (even in protic environments) and solid state.     

Scalable fine-grained parallelization of plane-wave-based ab initio molecular dynamics for large supercomputers

Many systems of great importance in material science, chemistry, solid-state physics, and biophysics require forces generated from an electronic structure calculation, as opposed to an empirically derived force law to describe their properties adequately. The use of such forces as input to Newton's equations of motion forms the basis of the ab initio molecular dynamics method, which is able to treat the dynamics of chemical bond-breaking and -forming events. However, a very large number of electronic structure calculations must be performed to compute an ab initio molecular dynamics trajectory, making the efficiency as well as the accuracy of the electronic structure representation critical issues. One efficient and accurate electronic structure method is the generalized gradient approximation to the Kohn-Sham density functional theory implemented using a plane-wave basis set and atomic pseudopotentials. The marriage of the gradient-corrected density functional approach with molecular dynamics, as pioneered by Car and Parrinello (R. Car and M. Parrinello, Phys Rev Lett 1985, 55, 2471), has been demonstrated to be capable of elucidating the atomic scale structure and dynamics underlying many complex systems at finite temperature. However, despite the relative efficiency of this approach, it has not been possible to obtain parallel scaling of the technique beyond several hundred processors on moderately sized systems using standard approaches. Consequently, the time scales that can be accessed and the degree of phase space sampling are severely limited. To take advantage of next generation computer platforms with thousands of processors such as IBM's BlueGene, a novel scalable parallelization strategy for Car-Parrinello molecular dynamics is developed using the concept of processor virtualization as embodied by the Charm++ parallel programming system. Charm++ allows the diverse elements of a Car-Parrinello molecular dynamics calculation to be interleaved with low latency such that unprecedented scaling is achieved. As a benchmark, a system of 32 water molecules, a common system size employed in the study of the aqueous solvation and chemistry of small molecules, is shown to scale on more than 1500 processors, which is impossible to achieve using standard approaches. This degree of parallel scaling is expected to open new opportunities for scientific inquiry.     

Influence of Freeze-Dried Phenolic-Rich Plant Powders on the Bioactive Compounds Profile,Antioxidant Activity and Aroma of Different Types of Chocolates

In this study, the blueberries (BLUB), raspberries (RASB), blackberries (BLCB), pomegranates pomace (POME) and beetroots (BEET) freeze-dried powders were used as the sources of phenolic compounds to enrich different types of chocolates, substituting a part of the sweetener. It was found that 1% addition of fruit or vegetable powders to chocolates increased the content of total phenolic compounds (flavan-3-ols, phenolic acids and anthocyanins) of enriched dark and milk chocolates compared to the control ones dependent on the powder used. Among the enriched chocolates, the chocolates with the addition of BLUB powder were characterized by the highest total polyphenol content. The highest percentage increase (approximately 80%) in the total polyphenol content was observed in MCH chocolate enriched with BLUB powder. Chocolates incorporated with BLUB, RASB, BLCB and POME powders presented a richer phenolic compound profile than control counterparts. The highest DPPH radical-scavenging capacity was exhibited by the DCH98S chocolate enriched with BEET powder. However, the DCH98ESt chocolates enriched with POME and BEET powders demonstrated the highest FRAP values. An electronic nose analysis confirmed the existence of differences between the profiles of volatile compounds of various types of chocolates enriched with fruit or vegetable powders. Thus, the enrichment of dark and milk chocolates with BLUB, RASB, BLCB, POME and BEET powders seemed to be an interesting approach to enhance bioactivity and to enrich the sensory features of various chocolate types.     

Hydrogen diffusivity,kinetics of H2O/H2 charge transfer and corrosion properties of LaNi5-powder,composite electrodes in 6 M KOH solution

Meticulous analysis of galvanostatic charge/discharge dependencies of the LaNi₅-based, powder composite electrode, in terms of determination of characteristic kinetic parameters of hydrogen storage electrode materials working in concentrated alkaline solution has been carried out. A special attention has been paid to the precise determination of charge and discharge times. The cathodic curves reveal their stepwise nature which allows to receive information of hydride material corrosion phenomena and determine the real time of atomic hydrogen absorption. The graphical way of determining of reduction times, based on differential cathodic curves is proposed. The knowledge of hydrogen absorption and desorption times allows to determine hydrogen diffusivity within the tested material with acceptable accuracy. The effect of external pressure (0.5–4 bar) on hydrogen absorption ability of LaNi₅-based material is also discussed. The exchange current density of H₂O/H₂ system distinctly increases with external pressure, at the same time, kind of gas atmosphere (Ar or H₂) scarcely affects the exchange current on the LaNi₅ electrode. The hydrogen capacity increases when the charge/discharge rate decreases. The reduction times of oxide phases formed during electrode discharge can be a measure of material corrosion rate. It is shown that the rate of LaNi₅ corrosion process strongly increases with the electrode cycling.     

Pressurized CO<Subscript>2</Subscript>-enhanced gasification of coal

Carbon dioxide was considered as a co-gasifying agent in a coal gasification reactor. The work presented herein describes the simulation results for the process and the experimental data on coal char gasification with CO₂ addition as the rate-controlling step for the entire process. To study the potentially beneficial effect of the introduction of CO₂ into the gasification system, several simulations were conducted using the commercial process simulation software ChemCAD 6.3^®. The results of a Gibbs equilibrium reactor were evaluated. The Boudouard reaction is a critical path for the development of this process, and the kinetics were studied experimentally. Four chars derived from the pyrolysis of Polish coals of different origins were selected for the experiments. The kinetic characteristics of this system were examined using a custom-designed pressurized fixed-bed reactor. To determine the effect of pressure on the gasification rate, several preliminary studies on the gasification of coal chars were performed isothermally at the temperature of 950 °C and pressures of 1, 10, and 20 bars. In contrast to the thermodynamic calculations, the experimental data revealed that increasing the CO₂ pressure leads to a higher reaction rate for medium-rank coal chars and low-rank lignite coal char, resulting in higher efficiency for carbon monoxide production. The pressure influences the reactivity more strongly when varied from 1 to 10 bars; a further increase in pressure affects the rate almost insignificantly. The observed behavior representing the changes in carbon conversion degree during gasification is satisfactorily described by the grain model.     

Low variance energy estimators for systems of quantum Drude oscillators: treating harmonic path integrals with large separations of time scales

In the effort to develop atomistic models capable of accurately describing nanoscale systems with complex interfaces, it has become clear that simple treatments with rigid charge distributions and dispersion coefficients selected to generate bulk properties are insufficient to predict important physical properties. The quantum Drude oscillator model, a system of one-electron pseudoatoms whose "pseudoelectrons" are harmonically bound to their respective "pseudonuclei," is capable of treating many-body polarization and dispersion interactions in molecular systems on an equal footing due to the ability of the pseudoatoms to mimic the long-range interactions that characterize real materials. Using imaginary time path integration, the Drude oscillator model can, in principle, be solved in computer operation counts that scale linearly with the number of atoms in the system. In practice, however, standard expressions for the energy and pressure, including the commonly used virial estimator, have extremely large variances that require untenably long simulation times to generate converged averages. In this paper, low-variance estimators for the internal energy are derived, in which the large zero-point energy of the oscillators does not contribute to the variance. The new estimators are applicable to any system of harmonic oscillators coupled to one another (or to the environment) via an arbitrary set of anharmonic interactions. The variance of the new estimators is found to be much smaller than standard estimators in three example problems, a one-dimensional anharmonic oscillator and quantum Drude models of the xenon dimer and solid (fcc) xenon, respectively, yielding 2-3 orders of magnitude improvement in computational efficiency.     

Antioxidant and Cytoprotective Properties of Plant Extract from Dry Flowers as Functional Dyes for Cosmetic Products

Nowadays, natural dyes are expected by the cosmetic and food industries. In contrast to synthetic dyes, colorants derived from natural sources are more environmentally friendly and safer for human health. In this work, plant extracts from Gomphrena globasa L., Clitoria ternatea L., Carthamus tinctorius L., Punica granatum L. and Papaver rhoeas L. as the natural and functional dyes for the cosmetics industry were assessed. Cytotoxicity on keratinocyte and fibroblast cell lines was determined as well as antioxidant and anti-aging properties by determining their ability to inhibit the activity of collagenase and elastase enzymes. In addition, the composition of the extracts was determined. The obtained extracts were also applied in face cream formulation and color analyses were performed. It has been shown that the obtained extracts were characterized by no cytotoxicity and a high antioxidant potential. The extracts also show strong ability to inhibit the activity of collagenase and moderate ability to inhibit elastase and provide effective and long-lasting hydration after their application on the skin. Application analyses showed that the extracts of P. rhoeas L., C. ternatea L. and C. tinctorius L. can be used as effective cosmetic dyes that allow for attainment of an intense and stable color during the storage of the product. The extracts of P. granatum L. and G. globasa L., despite their beneficial effects as active ingredients, did not work effectively as cosmetic dyes, because cosmetic emulsions with these extracts did not differ significantly in color from emulsions without the extract.     

Phosphonium ionic liquids as extractants for recovery of ruthenium(III) from acidic aqueous solutions

The aim of this work is to investigate extraction of ruthenium(III) from acidic aqueous solutions with phosphonium ionic liquids such as trihexyl(tetradecyl)phosphonium chloride (Cyphos IL 101), trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phosphinate (Cyphos IL 104) and tributyl(tetradecyl)phosphonium chloride (Cyphos IL 167) as extractants. The influence of HCl content in the feed solutions on extraction of Ru(III) was investigated. The research was performed for model solutions containing Ru(III) and a mixture of waste solutions containing Ru(III) and Rh(III). In addition, investigation of the type of extractant and its concentration in the organic phase on extraction of Ru(III) was carried out. Co-extraction of protons to the organic phase was determined. To the best of our knowledge, the extraction of Ru(III) with Cyphos IL 167 (tributyl(tetradecyl)phosphonium chloride) as an extractant has not yet been described in the scientific literature.     

Membrane mediated regulation in free peptides of HIV-1 gp41: minimal modulation of the hemifusion phase

Membrane-mediated structural modulation in two short fragments of the human HIV-1 envelope protein gp41 is demonstrated. Derived from the C-terminal membrane proximal external (MPE) and N-terminal fusion peptide proximal (FPP) regions, these peptides are widely separated in the primary sequence but form tertiary contacts during the intermediate (hemifusion) phase of HIV infection. The structural perturbations observed at the membrane interface offer evidence of rudimentary regulatory mechanisms operating in the free peptides which may be relevant in the biological system. No such regulatory phenomena were observed for the individual peptides in a membrane environment or between the peptides in aqueous solutions. Structure determination is made using a combination of circular and linear dichroism spectroscopy (supported by calorimetric measurements) and molecular dynamics simulations. Specifically, we show that these peptides interact locally without the conformational support of helical heptad repeat regions in native gp41 and that the modulation is not mutual with the FPP peptide operating as a primary regulator of the MPE-FPP interactions in the hemifusion phase.