Chemical modification of horseradish peroxidase with several methoxypolyethylene glycols

The chemical modification of ε-NH₂ lysine residues of horseradish peroxidase (E.C. 1.11.1.7) with several mPEG was carried out. The modified enzymes were studied through Chromatographic and electrophoretic methods; the extent of mPEG linking was determined using¹H-NMR. Peroxidase, modified with mPEG ranging from 350 to 5000, activated with 4-nitrophenylchloroformate (mPEGpn), showed a better thermal stability than the native, but there was no correlation between the length of the polymer adduct and the improvement. The enzyme was modified with mPEG (5000) activated by cyanuric chloride (mPEGcc). The number of modified lysine increased, but the thermal behavior of mPEGcc peroxidase was similar to those of mPEGpn enzymes. In all cases, the modification did not markedly change the stability in organic solvents.     

Interference-free biosensor based on screen-printing technology and sol-gel immobilization for determination of acetaldehyde in wine

A monoenzymatic amperometric biosensor was developed for the detection of acetaldehyde. The sensor is based on the association of screen-printed carbon electrodes and aldehyde dehydrogenase immobilized by a sol-gel entrapment method. Modification of screen-printed carbon electrodes with Reinecke salt of Meldola's Blue (MBRS) resulted in highly sensitive and interference-free nicotinamide-adenine dinucleotide (NADH) detectors. Based on MBRS-mediated oxidation of NADH at -150 mV versus pseudo Ag/AgCl, acetaldehyde was determined in the range 10-260 microM, compatible with wine quality monitoring. The method of immobilization based on sol-gel entrapment was optimized to obtain the best compromise between sensitivity and operational stability. The sensor response was stable for 40 consecutive assays with methyltrimethoxysilane used as alkoxide precursor, thus allowing a possible calibration of the sensor before each measurement. The biosensors were used to analyze French wines. The method was validated with a commercially available enzymatic kit based on a standard spectrophotometric method.     

Amperometric biosensors based on nafion coated screen-printed electrodes for the determination of cholinesterase inhibitors

Screen-printed electrodes coated with the nafion layer have been investigated for cholinesterase biosensor design. The butyrylcholinesterase (ChE) from horse serum was immobilised onto the nafion layer by cross-linking with glutaraldehyde vapours. The biosensors obtained showed better long-term stability and lower working potential in comparison to those obtained with no nafion coating. The sensitivity of a biosensor toward organophosphate pesticides is not affected by the nafion coating. The detection limits were found to be 3.5x10(-7) M for trichlorfon and 1.5x10(-7) M for coumaphos.     

A combinatorial/geometric analysis of convex cyclofusene

Previously, we presented an algorithm for counting Kekulé structures for parallelogram-like benzenoids with holes by counting descending paths using rectangular meshes with holes. In this article, we describe an algorithm to count Kekulé structures for convex cyclofusenes using a combinatorial/geometric approach.     

Novel Protocol for Covalent Immobilization of Horseradish Peroxidase on Gold Electrode Surface

A novel protocol for immobilization of horseradish peroxidase (HRP) onto diazonium functionalized screen‐printed gold electrode (SPGE) has been successfully developed. This protocol involved 1) electrochemical reduction of p‐nitrophenyl diazonium salts synthesized in situ in acidic aqueous solution to graft a layer of p‐nitrophenyl on SPGE, 2) electrochemical reduction of the nitro groups to convert to amines, 3) chemical reaction with nitrous acid to transform the amine to diazonium derivative and 4) chemical coupling of the enzyme with the diazonium group to form a covalent diazo bond. The fabricated biosensor showed the direct electrochemistry of HRP and displayed electrocatalytic activity towards the reduction of hydrogen peroxide (H₂O₂) without any mediator. The biosensor exhibited fast amperometric response to H₂O₂. The catalytic current increased with increasing H₂O₂ concentration from 5 μM to 30 μM and the detection limit of the biosensor was 2 μM. The biosensor exhibited acceptable sensitivity, good reproducibility and long‐term stability.     

An Electrochemical Method for Sensitive Determination of Antioxidant Capacity

A simple and sensitive electrochemical method for the determination of antioxidant capacity has been studied. 4‐hydroxybenzoic acid (4‐HBA) was used as a trapping agent for photogenerated ^.OH radicals, leading to 3,4‐dihydroxybenzoic acid (3,4‐DHBA). Square‐wave voltammetry was used to quantify the amount of 3,4‐DHBA formed from the reaction between 4‐HBA and ^.OH. Addition of antioxidants induced the competition between 4‐HBA and antioxidants toward ^.OH elimination, resulting in a decrease of the measured current. The IC₅₀ for different standard antioxidants was calculated and expressed in Trolox equivalent antioxidant capacity (TEAC). The proposed method was successfully compared to a fluorimetric one.     

Simple estimation of absolute free energies for biomolecules

One reason that free energy difference calculations are notoriously difficult in molecular systems is due to insufficient conformational overlap, or similarity, between the two states or systems of interest. The degree of overlap is irrelevant, however, if the absolute free energy of each state can be computed. We present a method for calculating the absolute free energy that employs a simple construction of an exactly computable reference system which possesses high overlap with the state of interest. The approach requires only a physical ensemble of conformations generated via simulation and an auxiliary calculation of approximately equal central-processing-unit cost. Moreover, the calculations can converge to the correct free energy value even when the physical ensemble is incomplete or improperly distributed. As a "proof of principle," we use the approach to correctly predict free energies for test systems where the absolute values can be calculated exactly and also to predict the conformational equilibrium for leucine dipeptide in implicit solvent.     

A New Elaboration Route by Sol-Gel Process for Cerium Doped SrHfO3 Films and Powders

We present for the first time the elaboration via sol gel route of cerium (1 mol%) doped SrHfO₃ powders and films. The sol is elaborated using hafnium and strontium ethoxides as precursors and cerium nitrate as dopant. The structure of powders and films are characterized by convergent methods: Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, Raman spectroscopy and optical measurements conducted by the prism coupling method. The powder crystallises from amorphous to pure SrHfO₃ orthorhombic perovskite phase after a 800°C heat treatment. Nevertheless HfO₂ monoclinic phase coexists with orthorhombic perovskite phase after a 1000°C heat treatment. The film is amorphous for annealing temperatures lower than 700°C and presents good waveguiding performances. The film heat-treated at 700°C exhibits a refractive index of 1.810 ± 0.001 (λ = 543.5 nm) for a thickness around 375 nm. The attenuation coefficient obtained on the 400°C heat-treated film is α = 4.0 ± 0.5 dB/cm (λ = 632.8 nm). The film starts to crystallize at 750°C into the SrHfO₃ orthorhombic phase but HfO₂ monoclinic phase is also detected after a heat treatment at 1000°C. The potentiality of sol gel Ce³⁺:SrHfO₃ powders and films for scintillation applications are investigated.     

Controlled synthesis of ternary II-II'-VI nanoclusters and the effects of metal ion distribution on their spectral properties

The reaction of [(3,5-Me(2)-C(5)H(3)N)(2)Zn(ESiMe(3))(2)] (E = Se, Te) with cadmium(II) acetate in the presence of PhESiMe(3) and P(n)Pr(3) at low temperature leads to the formation of single crystals of the ternary nanoclusters [Zn(x)()Cd(10)(-)(x)()E(4)-(EPh)(12)(P(n)()Pr(3))(4)] [E = Se, x = 1.8 (2a), 2.6 (2b); Te, x = 1.8 (3a), 2.6 (3b)] in good yield. The clusters [Zn(3)Hg(7)Se(4)(SePh)(12)(P(n)()Pr(3))(4)] (4) and [Cd(3.7)Hg(6.3)Se(4)(SePh)(12)(P(n)()Pr(3))(4)] (5) can be accessed by similar reactions involving [(3,5-Me(2)-C(5)H(3)N)(2)Zn(SeSiMe(3))(2)] or [(N,N'-tmeda)Cd(SeSiMe(3))(2)] (1) and mercury(II) chloride. The metal silylchalcogenolate reagents are efficient delivery sources of {ME(2)} in cluster synthesis, and thus, the metal ion content of these clusters can be readily moderated by controlling the reaction stoichiometry. The reaction of cadmium acetate with [(3,5-Me(2)-C(5)H(3)N)(2)Zn(SSiMe(3))(2)], PhSSiMe(3), and P(n)()Pr(3) affords the larger nanocluster [Zn(2.3)Cd(14.7)S(4)(SPh)(26)(P(n)()Pr(3))(2)] (6). The incorporation of Zn(II) into {Cd(10)E} (E = Se, Te) and Zn(II) or Cd(II) into {Hg(10)Se} nanoclusters results in a significant blue shift in the energy of the first "excitonic" transition. Solid-state thermolysis of complexes 2 and 3 reveals that these clusters can be used as single-source precursors to bulk ternary Zn(x)Cd(1)(-)(x)E materials as well as larger intermediate clusters and that the metal ion ratio is retained during these reactions.     

Metal–Chalcogenolate Complexes with Silyl Functionalities: Synthesis and Reaction Chemistry

Metal complexes with reactive [ESiR₃]^? (E = S, Se, Te) or [S(SiMe₂)]^2? ligands provide a means for the delivery of {ME_n}^m? units in the formation of heterometallic polynuclear complexes and clusters. These complexes can be reacted with M′ salts to promote M–E–M′ interactions via the elimination of a silane side product. This research report summarizes the recent developments in the synthesis of silylchalcogenolate complexes of the d‐block metals with emphasis directed to those for which reactivity studies for the formation of ternary clusters have been carried out. The effects of varying the groups on the silyl moiety on the stability and reactivity of these precursor molecules are also discussed.