A convenient one-pot synthesis of 1,8-naphthyridones

In this paper, we disclose an efficient one-pot procedure for the preparation of substituted 1,8-naphthyridin-4-one analogues. Previous efforts to effect this type of transformation were complicated by the formation of benzene tricarboxylate. Via the use of excess base, the impurity formation was completely inhibited. This allowed for the clean preparation of the desired intermediate and subsequent formation of naphthyridone analogues in a single flask, which could then be crystallized directly from the reaction mixture in good yield and high purity.     

Temperature-sensitive luminescence of tris (β-diketone) europium chelates for monitoring high-speed cationic photopolymerizations

The temperature-dependent luminescence of tris (β-diketone) chelates of europium was used for in situ temperature measurements during cationic photopolymerizations of vinyl ethers. These molecular-level luminescent probes provided a real-time, noninvasive method for monitoring temperature during these high-speed polymerizations. Two specific probes, tris (benzoyl-1, 1, 1-trifluoroacetone) europium and tris (1,1,1,5,5,5,-hexafluoroacetylacetone) europium, met several stringent spectral and performance requirements for application in our system. The luminescence from these probes exhibits a reproducible temperature dependence over a wide temperature range and is not sensitive to changes in viscosity. In situ temperature profiles obtained using this novel technique verified the importance of thermal effects during these highly exothermic photopolymerizations. These studies have demonstrated the utility of the tris(β-diketone) europium chelates for characterizing the temperature during high-speed photopolymerizations that cannot be monitored using conventional techniques. © 1995 John Wiley & Sons, Inc.     

Synthesis of the methanesulfonates of α-(4-chlorophenyl)-α-[1-(2-chlorophenyl)emenyl]-1H-1,2,4-triazole-1-ethanol and α-[1-(2-chlorophenyl)ethenyl]-α-(2,4-difluorophenyl)-1H-1,2,4-triazole-1-ethanol,alpha styryl carbinol antifungal agents

The methanesulfonates of (α-(4-chlorophenyl)-α-[1-(2-chlorophenyl)ethenyl]-1H-1,2,4-triazole-1-ethanol and α-[1-(2-chlorophenyl)ethenyl]-α-(2,4-difluorophenyl)-1H-1,2,4-triazole-1-ethanol ( 1a, b ) are orally effective α-styryl carbinol derivatives developed for the treatment and prevention of systemic fungal infections. Practical new processes amenable for the large-scale production of these compounds are described. Of note is the selection of dichlorostyrene as a convenient precursor of the styryl portion, modification of a sensitive Grignard addition into a realistic preparative reaction and the use of 1,2,4-triazole simultaneously as a base transfer agent and nucleophile.     

Vibrational infrared intensities and polar tensors of 1,2-difluoroethylenes

The polar tensors of cis and trans-1,2-difluoroethylenes have been determined with new normal modes based in a reassignment of nu(7) and nu(12) bands of the trans isomers and frequency values corrected for Fermi resonances and phase shifts. The signs of the dipole moment derivatives (and its directions, for B(u) symmetry species) were considered to be those of MP2/6-31G** estimates. Root mean square errors calculated for the new tensor element values from each pair of isotopomers (trans-1,2-C(2)H(2)F(2)/trans-1,2-C(2)D(2)F(2) and cis-1,2-C(2)H(2)F(2)/cis-1,2-C(2)D(2)F(2)) show that the new polar tensor sets fit the isotopic invariance criterion better than previously reported sets. The accuracy of polar tensor transference procedures was tested by calculating the infrared intensities of trans-1,2-C(2)H(2)F(2) through the new polar tensors of the cis isomer. The resulting estimates are very accurate and also support the new band assignment, though the A(6) intensity remains still somewhat underestimated.     

Evaluation of the calibration errors on cooling of a differential scanning calorimeter using different sets of standard metals

The temperature calibration on cooling of thermal analysis instruments is important for the accurate study of the non-isothermal crystallization kinetics of semi-crystalline polymers. In previous works, a methodology was proposed for performing the calibration on cooling of differential scanning calorimeters (DSCs) with standard metals, and the calibration errors were checked using transitions of high-purity liquid crystals. In this work, alternative, physically meaningful, procedures for carrying out the calibration on cooling are analyzed and validated. The calibration errors are evaluated also with liquid crystalline transitions, when the calibration is performed with standard metals, in a wide temperature range, and when due account is taken for the need of isothermal corrections to the temperature measurements. It is shown that any pair of standard metals may be used to calibrate on cooling, that the calibration errors increase for wider working temperature ranges and that, providing that certain conditions are fulfilled, both calibration procedures yield similar results.     

A flow-through cell for differential pulse anodic stripping voltammetry

A flow-through voltammetric cell with a hanging mercury drop electrode has been developed to fit the static mercury drop electrode (PAR 303). The design has resulted in a linear increase of sensitivity with flow rate and an enhancement of sensitivity by the wall-jet effect. The cell is used in a flow injection system in which samples are introduced with a R??i?ka—Hansen injector. The mercury drop is held at plating potentials while the sample peak passes through the cell. Stripping is done under stopped flow conditions, to reduce noise, after the sample has been washed completely from the cell. The stripping thus takes place into the carrier electrolyte which always has a constant composition independent of sample constituents. Film-forming interfering species will, however, remain on the surface of the mercury drop. The effect of medium exchange on films produced by l-cysteine is reported. The flow-through medium exchange simplifies deaeration, speeds up analysis and reduces contamination.     

Charge neutralization of ions from benzene

Cross-sections have been measured for the charge neutrilization if ions from benzene in kiloelectron-volt collisions with benezene target molecules. Measured values range from 65 Ų for the symmetric [C₆H₆]⁺? C₆H₆ resonant reactions to 8 Ų for [C₃H₃]⁺? C₆H₆ reactions. Cross-sections computed using a simple resonance charge transfer model compare favourably with experimental data for the symmetric reactions. The cross-sections for asymmetric reactions are smaller that those for they symmetric system and magnitudes of the asymmetric cross-sections are correlated with recombination energies of the respective ions.