Synthesis,characterization, and transport properties of Nafion-polypyrrole membrane for direct methanol fuel cell (DMFC) application

Journal of Solid State Electrochemistry - Due to their distinctive chemical, electronic, and environmental properties, polypyrrole is used as a blocking barrier for methanol leakage in direct...     

Performance of hydrophobic interaction ligands for human membrane‐bound catechol‐O‐methyltransferase purification

Despite of membrane catechol‐O‐methyltransferase (MBCOMT, EC 2.1.1.6) physiological importance on catecholamines’ O‐methylation, no studies allowed their total isolation. Therefore, for the first time, we compare the performance of three hydrophobic adsorbents (butyl‐, epoxy‐, and octyl‐Sepharose) in purification of recombinant human COMT (hMBCOMT) from crude Brevibacillus choshinensis cell lysates to develop a sustainable chromatographic process. Hydrophobic matrices were evaluated in terms of selectivity and hMBCOMT's binding and elution conditions. Results show that hMBCOMT's adsorption was promoted on octyl and butyl at ≤375 mM NaH₂PO_4, while on epoxy higher concentrations (>850 mM) were required. Additionally, hMBCOMT's elution was promoted on epoxy, butyl, and octyl using respectively 0.1–0.5, 0.25–1, and 1% of Triton X‐100. On butyl media, a stepwise strategy using 375 and 0 mM NaH₂PO₄, followed by three elution steps at 0.25, 0.7 and 1% Triton X‐100, allowed selective hMBCOMT isolation. In conclusion, significant amounts of MBCOMT were purified with high selectivity on a single chromatography procedure, despite its elution occurs on multiple peaks. Although successful applications of hydrophobic interaction chromatography in purification of membrane proteins are uncommon, we proved that traditional hydrophobic matrices can open a promising unexplored field to fulfill specific requirements for kinetic and pharmacological trials.     

An efficient and regioselective synthesis of 1,1′-oxalylbis[3-(alkyl/aryl/heteroaryl)-5-(trihalomethyl)-1H-pyrazoles] from 4-alkoxy-1,1,1-trihaloalk-3-en-2-ones

Abstract  

This work describes the regioselective synthesis of two new series of 1,1′-oxalylbis[3-(alkyl/aryl/heteroaryl)-4,5-dihydro-5-hydroxy-5-(trihalomethyl)-1H-pyrazoles], where the 3-substituents are H, Me, C₆H₅, 4-FC₆H₄, 4-ClC₆H₄, 4-BrC₆H₄, 4-NO₂C₆H₄, 4,4′-BiPh, and 2-furyl, in a one-pot methodology with ethanol as solvent, from the reaction of 4-alkoxy-4-(alkyl/aryl/heteroaryl)-1,1,1-trihaloalk-3-en-2-ones with oxalyldihydrazide (51–89%). Complementarily, the dehydration reactions of five examples of the described oxalylbispyrazolines are also reported, which furnished the respective 1,1′-oxalylbis[3-(alkyl/aryl/heteroaryl)-5-(trihalomethyl)-1H-pyrazoles] in 53–78% yields without the two C(O)–N bond cleavages.     

A Convenient Method to Obtain 4,5-Dihydro-1H-Methylpyrazoles by A Ring Transformation Reaction

A convenient method for the synthesis of alkyl[aryl]-substituted 5-hydroxy-5-trifluoromethyl-4,5-dihydro-1H-1-methylpyrazole (2) from a new ring transformation reaction of alkyl[aryl]-substituted-5-hydroxy-5-trifluoromethyl-4,5-dihydro-1H-1-pyrazolethiocarboxyamide (1) with methylhydrazine in THF, and the thermal dehydration of 2, are reported.     

Vibrational infrared intensities and polar tensors of 1,2-difluoroethylenes

The polar tensors of cis and trans-1,2-difluoroethylenes have been determined with new normal modes based in a reassignment of nu(7) and nu(12) bands of the trans isomers and frequency values corrected for Fermi resonances and phase shifts. The signs of the dipole moment derivatives (and its directions, for B(u) symmetry species) were considered to be those of MP2/6-31G** estimates. Root mean square errors calculated for the new tensor element values from each pair of isotopomers (trans-1,2-C(2)H(2)F(2)/trans-1,2-C(2)D(2)F(2) and cis-1,2-C(2)H(2)F(2)/cis-1,2-C(2)D(2)F(2)) show that the new polar tensor sets fit the isotopic invariance criterion better than previously reported sets. The accuracy of polar tensor transference procedures was tested by calculating the infrared intensities of trans-1,2-C(2)H(2)F(2) through the new polar tensors of the cis isomer. The resulting estimates are very accurate and also support the new band assignment, though the A(6) intensity remains still somewhat underestimated.     

Benzene–kaolinite interaction properties

In this work, we present a theoretical study of interaction of benzene with kaolinite and an analysis of the vibrational spectra, electrostatic potential maps, and self consistent field (SCF) orbitals. B3LYP and MP2 benzene–kaolinite results indicate a preferential interaction of benzene on kaolinite octahedral surface. Population analysis indicates that the atoms modified their charges when the monoaromatic molecule and clay mineral are close to tetrahedral and octahedral surface of kaolinite, which suggests that the adsorbed molecule becomes slightly positive. Infrared vibrational data show the reduction in the band frequencies related to the kaolinite external hydroxyls, indicating a weak interaction of benzene with clay mineral. It also was verified, from the potential electrostatic maps, a change in electron density in both benzene and kaolinite. Electron localization function analysis was also carried out for this interaction. © 2011 Wiley Periodicals, Inc.     

A simple method to prepare high surface area activated carbon from carboxyl methyl cellulose by low temperature physical activation

Activated carbon with high surface area was prepared from sodium salt of carboxyl methyl cellulose by physical activation at 400 °C followed by treatment in boiling water. The carbon was characterized by XRD, SEM, EPR, TG, IR, surface areas and porosity measurements. The carbon showed alkaline reaction in aqueous solution. It showed high surface area and pore volume in comparison to two commercially available carbons.     

Development and validation of a high-performance liquid chromatographic method for the determination of clomazone residues in surface water

A method is described for the determination of clomazone residues in surface water by high-performance liquid chromatography with UV detection. The method involves solid-phase extraction with C18 extraction tubes. Clomazone was separated on a C18 column with a mobile phase of methanol-water (65:35, v/v) at pH 4.0 and a flow-rate of 1.0 ml/min. After optimization of the extraction and separation conditions, the method was validated. The method developed can be used for determination of clomazone in surface water, at the limit of 0.1 mcirog/l set by the European Union drinking water directive, with a 400-fold preconcentration.     

Evaluation of the effects of Candidatus Liberibacter asiaticus on inoculated citrus plants using laser-induced breakdown spectroscopy (LIBS) and chemometrics tools

This study investigated the organic and inorganic constituents of healthy leaves and Candidatus Liberibacter asiaticus (CLas)-inoculated leaves of citrus plants. The bacteria CLas are one of the causal agents of citrus greening (or Huanglongbing) and its effect on citrus leaves was investigated using laser-induced breakdown spectroscopy (LIBS) combined with chemometrics. The information obtained from the LIBS spectra profiles with chemometrics analysis was promising for the construction of predictive models to identify healthy and infected plants. The major, macro- and microconstituents were relevant for differentiation of the sample conditions. The models were then applied to different inoculation times (from 1 to 8 months). The models were effective in the classification of 82-97% of the diseased samples with a 95% significance level. The novelty of this method was in the fingerprinting of healthy and diseased plants based on their organic and inorganic contents.