Kinetics and mechanism of the phenolysis of asymmetric diaryl carbonates

The reactions 4-methylphenyl 4-nitrophenyl carbonate (MPNPC), 4-chlorophenyl 4-nitrophenyl carbonate (CIPNPC), 4-methylphenyl 2,4-dinitrophenyl carbonate (MPDNPC), and 4-chlorophenyl 2,4-dinitrophenyl carbonate (CIPDNPC) with a homogeneous series of phenoxide anions are subjected to a kinetic investigation in aqueous solution (25.0 degrees C, ionic strength 0.2 M (KCI)). Under an excess of phenoxide with respect to the substrate, all of these reactions obey pseudo-first-order kinetics and are first order in phenoxide. The Br?nsted-type plots for the nucleophilic rate constants (k(N)) are linear, with slopes beta = 0.48 (MPNPC), 0.67 (ClPNPC), 0.41 (MPDNPC), and 0.32 (ClPDNPC). The magnitude of these slopes and the absence of a curvature in the Br?nsted plot at pK(a) = 7.1 for the CIPNPC reactions are consistent with concerted mechanisms (one step). The carbonates MPDNPC and ClPDNPC are more reactive than MPNPC and CIPNPC, respectively, toward phenoxide nucleophiles. This can be explained by the presence of a second nitro group in the nucleofuge of the dinitro derivatives, which (i) leaves their carbonyl carbon more positively charged, making them better electrophiles, and (ii) makes 2,4-dinitrophenoxide a better leaving group than 4-nitrophenoxide. The 4-chloro derivatives are more reactive than the corresponding 4-methyl derivatives. This should be due to the greater electron withdrawal of 4-chloro than 4-methyl, which makes the former carbonyl more electrophilic. Comparison of the concerted phenolysis of MPNPC with the stepwise reactions of secondary alicyclic amines with the same substrate indicates that substitution of a secondary alicyclic amine group in a zwitterionic tetrahedral intermediate by a phenoxy group greatly destabilizes the intermediate. An equation is deduced for log k(N) in terms of the basicity of the nucleophile, the nonleaving moiety, and the leaving group. This equation shows that for these reactions, the sensitivity of log k(N) to the basicity of the nonleaving moiety (beta(nlg) = -0.27) is very similar to that of the nucleofuge (beta(lg) = -0.25).     

Effect of ion pairing on steady-state voltammetric limiting currents at microelectrodes Part I. Theoretical principles

Voltammetric studies in solutions of high resistivity are facilitated by the use of microelectrodes under steady-state conditions. Such solutions are encountered with solvents of low permittivity because of the very sparing solubility of electrolytes. Moreover, in such media the supporting electrolyte, as well as the electroactive ionic species, is usually extensively ion paired. Here we predict the limiting current that will flow in these circumstances, when a monovalent ion undergoes a one-electron transfer at a hemispherical microelectrode to form a neutral product. The ion pairing equilibria are assumed to be fast but all diffusion coefficients are treated as distinct. An analytical solution is elusive in the general case, but a simple numerical procedure allows the limiting current to be predicted for any combination of the system parameters. Several special cases are also discussed, some of which yield explicit formulae for the limiting current. In a companion paper, experimental data are compared with the theoretical predictions.     

In situ monitoring of metal nanoparticle self-assembly on protein-functionalized glass by broadband optical waveguide spectroscopy

Broadband, time-resolved optical waveguide (OWG) spectroscopy has been used for in situ, real-time investigation into the self-assembly of metal nanoparticle monolayers. The OWG spectroscopy makes it possible to use the transverse electric (TE) and transverse magnetic (TM) modes to measure surface plasmon absorption of immobilized metal nanoparticles in two directions, parallel and normal to the waveguide surface. Therefore, this technique can provide direction-dependent information on the metal nanoparticles at the interface. In this paper, a 50-microm-thick glass plate was used as a slab waveguide and the kinetics of Au nanoparticle adsorption on a hemoglobin-functionalized glass substrate was examined in the early stage of self-assembly. The findings show that with the TE mode the surface plasmon resonance (SPR) behavior for immobilized Au nanoparticles is different from that with the TM mode.     

Crystal,Molecular, and Electronic Structure of 1-Acetyl-indoline and Derivatives

The crystal and molecular structures of the following molecules have been determined: 1-acetyl-indoline, 1-acetyl-5-nitro-indoline, l-acetyl-5-nitro-7-bromo-indoline, 1-acetyl-5-bromo-7-nitroindoline, and l-acetyl-5-bromo-7-nitro-indol. Molecular orbital calculations are performed for these compounds and two related species.     

New butenolides in plantlets of Virola surinamensis (Myristicaceae)

A phytochemical investigation in plantlets of the Brazilian medicinal tree Virola surinamensis resulted in the isolation and structural determination of four new compounds: 3-hydroxy-4-methyl-2-(11'-piperonyl-n-undecyl)-butenolide; 3-hydroxy-4-methyl-2-(7'-piperonyl-n-heptyl)-butanolide; 9'-(3,4-methylenedioxy-phenyl)-nonanoic acid and 13'-(3,4-methylene-dioxyphenyl)-tridecanoic acid. Thirteen compounds previously isolated from seeds and adult plants were also reported.     

Exciton dissociation dynamics in model donor-acceptor polymer heterojunctions. I. Energetics and spectra

In this paper we consider the essential electronic excited states in parallel chains of semiconducting polymers that are currently being explored for photovoltaic and light-emitting diode applications. In particular, we focus upon various type II donor-acceptor heterojunctions and explore the relation between the exciton binding energy to the band offset in determining the device characteristic of a particular type II heterojunction material. As a general rule, when the exciton binding energy is greater than the band offset at the heterojunction, the exciton will remain the lowest-energy excited state and the junction will make an efficient light-emitting diode. On the other hand, if the offset is greater than the exciton binding energy, either the electron or hole can be transferred from one chain to the other. Here we use a two-band exciton to predict the vibronic absorption and emission spectra of model polymer heterojunctions. Our results underscore the role of vibrational relaxation and suggest that intersystem crossings may play some part in the formation of charge-transfer states following photoexcitation in certain cases.     

Vibrational infrared intensities and polar tensors of 1,2-difluoroethylenes

The polar tensors of cis and trans-1,2-difluoroethylenes have been determined with new normal modes based in a reassignment of nu(7) and nu(12) bands of the trans isomers and frequency values corrected for Fermi resonances and phase shifts. The signs of the dipole moment derivatives (and its directions, for B(u) symmetry species) were considered to be those of MP2/6-31G** estimates. Root mean square errors calculated for the new tensor element values from each pair of isotopomers (trans-1,2-C(2)H(2)F(2)/trans-1,2-C(2)D(2)F(2) and cis-1,2-C(2)H(2)F(2)/cis-1,2-C(2)D(2)F(2)) show that the new polar tensor sets fit the isotopic invariance criterion better than previously reported sets. The accuracy of polar tensor transference procedures was tested by calculating the infrared intensities of trans-1,2-C(2)H(2)F(2) through the new polar tensors of the cis isomer. The resulting estimates are very accurate and also support the new band assignment, though the A(6) intensity remains still somewhat underestimated.     

Spectroscopic and electrochemical studies on (2-hydroxypicolinate)-bis(2,2′-bipyridine)ruthenium(II) and related complexes

Summary The synthesis, spectra and electrochemistry of [Ru(bipy)₂-(picOH)]⁺ and -picO-[Ru(bipy)₂]₂ ²⁺ (bipy = 2,2-bipyridine and picOH = 3-hydroxypicolinate ion) are described. The spectroscopic properties in the visible region are dominated by the intense Ru bipy chargetransfer transitions. In the binuclear complex, the two [Ru(bipy)₂L]²⁺ moieties are nonequivalent, exhibiting E _1/2 = 0.69 and 1.20 V versus s.h.e. The partially oxidized species exhibits a weak intervalence transfer band at 1085 nm, and is consistent with a Robin-Day class II mixed valence complex.     

Developing a sequential injection-square wave voltammetry (SI-SWV) method for determination of atrazine using a hanging mercury drop electrode

This paper describes the development of a sequential injection analysis method to automate the determination of atrazine by square wave voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. To perform these tasks, an 800 μL monosegment is formed, composed by 400 μL of sample and 400 μL of buffer/standard solution. To obtain an efficient homogenization, the sample solution is divided in five zones intercalated by four zones of the Britton-Robinson buffer (pH 2.0) in presence of appropriate concentration of NaNO₃ and varying atrazine standard concentrations. This mixture zone is isolated from the carrier solution by two 100 μL air bubbles. After homogenization in an auxiliary reaction coil the mixture zone is injected toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode, at a flow rate of 50 μL s⁻¹. After a suitable delay time, the potential is scanned from −0.5 to −1.2 V versus Ag/AgCl using a frequency of 300 Hz and pulse height of 25 mV. The linear dynamic range is observed for atrazine concentrations between 1.16 × 10⁻⁷ and 2.32 × 10⁻⁶ mol L⁻¹, obeying the linear equation i_p = (−6.91 ± 0.07) × 10⁸[atrazine] + (4 ± 8), with r² = 0.9996, for which the slope is given in nA L mol⁻¹. The detection and quantification limits of the method are 2.1 × 10⁻⁸ and 7.0 × 10⁻⁸ mol L⁻¹, respectively. The sampling frequency is 37 h⁻¹, when the standard addition protocol is followed. This frequency can be increased to 42 h⁻¹ if the protocol to obtain in-line calibration curve is used for quantification. The method was applied for determination of atrazine in spiked river water samples and its accuracy was evaluated by comparison with the batch standard addition approach, which revealed that there is no evidence of statistically significant differences between the two methods.     

Evaluation of the calibration errors on cooling of a differential scanning calorimeter using different sets of standard metals

The temperature calibration on cooling of thermal analysis instruments is important for the accurate study of the non-isothermal crystallization kinetics of semi-crystalline polymers. In previous works, a methodology was proposed for performing the calibration on cooling of differential scanning calorimeters (DSCs) with standard metals, and the calibration errors were checked using transitions of high-purity liquid crystals. In this work, alternative, physically meaningful, procedures for carrying out the calibration on cooling are analyzed and validated. The calibration errors are evaluated also with liquid crystalline transitions, when the calibration is performed with standard metals, in a wide temperature range, and when due account is taken for the need of isothermal corrections to the temperature measurements. It is shown that any pair of standard metals may be used to calibrate on cooling, that the calibration errors increase for wider working temperature ranges and that, providing that certain conditions are fulfilled, both calibration procedures yield similar results.