In vitro anticancer activity and biologically relevant metabolization of organometallic ruthenium complexes with carbohydrate-based ligands

The synthesis and in vitro anticancer activity of dihalogenido(eta6-p-cymene)(3,5,6-bicyclophosphite-alpha-D-glucofuranoside)ruthenium(II) complexes are described. The compounds were characterized by NMR spectroscopy and ESI mass spectrometry, and the molecular structures of dichlorido-, dibromido- and diiodido(eta6-p-cymene)(3,5,6-bicyclophosphite-1,2-O-isopropylidene-alpha-D-glucofuranoside)ruthenium(II) were determined by X-ray diffraction analysis. The complexes were shown to undergo aquation of the first halido ligand in aqueous solution, followed by hydrolysis of a P--O bond of the phosphite ligand, and finally formation of dinuclear species. The hydrolysis mechanism was confirmed by DFT calculations. The aquation of the complexes was markedly suppressed in 100 mM NaCl solution, and notably only very slow hydrolysis of the P--O bond was observed. The complexes showed affinity towards albumin and transferrin and monoadduct formation with 9-ethylguanine. In vitro studies revealed that the 3,5,6-bicyclophosphite-1,2-O-cyclohexylidene-alpha-D-glucofuranoside complex is the most cytotoxic compound in human cancer cell lines (IC50 values from 30 to 300 microM depending on the cell line).     

Use of quasi-isoelectric buffers to limit protein adsorption in capillary zone electrophoresis

The use of quasi-isoelectric buffers consisting of narrow pH cuts of carrier ampholytes (NC) has been investigated to limit protein adsorption on capillary walls during capillary zone electrophoresis experiments. To quantify protein adsorption on the silica surface, a method derived from that of Towns and Regnier has been developed. alpha-Lactalbumin (14 kDa, pI 4.8) and alpha-chymotrypsinogen A (25 kDa, pI 9.2) have been used as model proteins. Acidic narrow pH cuts of carrier ampholytes (NC, pH 3.0) obtained from fractionation of Serva 4-9 carrier ampholytes were used as BGE in bare-silica capillaries, and allowed to decrease significantly protein adsorption, as compared to experiments performed with classical formate buffer. The use of NC as BGE appeared to be as efficient as the use of polydimethylacrylamide coating to prevent protein adsorption. This increase of protein recovery when using NC was attributed to the interaction of carrier ampholytes with the silica surface, leading to a shielding of the capillary wall.     

Three-dimensional molecular mapping of a multiple emulsion by means of CARS microscopy

Multiple emulsions consisting of water droplets dispersed in an oil phase containing emulsifier which is emulsified in an outer water phase (W/O/W) are of great interest in pharmacology for developing new drugs, in the nutrition sciences for designing functional food, and in biology as model systems for cell organelles such as liposomes. In the food industry multiple emulsions with high sugar content in the aqueous phase can be used for the production of sweets, because the high sugar content prevents deterioration. However, for these emulsions the refractive indexes of oil and aqueous phase are very similar. This seriously impedes the analysis of these emulsions, e.g., for process monitoring, because microscopic techniques based on transmission or reflection do not provide sufficient contrast. We have characterized the inner dispersed phase of concentrated W/O/W emulsions with the same refractive index of the three phases by micro Raman spectroscopy and investigated the composition and molecular distribution in water-oil-water emulsions by means of three-dimensional laser scanning CARS (coherent anti-Stokes Raman scattering) microscopy. CARS microscopy has been used to study water droplets dispersed in oil droplets at different Raman resonances to visualize different molecular species. Water droplets with a diameter of about 700 nm could clearly be visualized. The advantages of CARS microscopy for studying this particular system are emphasized by comparing this microscopic technique with conventional confocal reflection and transmission microscopies.     

Osmotic compression and expansion of highly ordered clay dispersions

Aqueous dispersions of nanometric clay platelets (Laponite) have been dewatered through different techniques: centrifugation, mechanical compression, and osmotic stress (dialysis against a polymer solution). The positional and orientational correlations of the particles have been determined through small-angle neutron scattering. Uniaxial compression experiments produce concentrated dispersions (volume fraction > 0.03) in which the platelets have strong orientational and positional correlations. The orientational correlations cause the platelets to align with their normal along a common axis, which is the axis of compression. The positional correlations cause the platelets to be regularly spaced along this direction, with a spacing that matches the average volume per particle in the dispersion. The swelling law (volume fraction versus separation distance) is one-dimensional, as in a layered system. Changes in the applied osmotic pressure cause the water content of the dispersion to either rise or decrease, with time scales that are controlled by interparticle friction forces and by hydrodynamic drag. At long times, the dispersions approach osmotic equilibrium, which can be defined as the common limit of swelling and deswelling processes. The variation of the equilibrium water content with the applied osmotic pressure has been determined over 1 decade in volume fractions (0.03 < phi < 0.3) and 3 decades in pressures. This equation of state matches the predictions made from the knowledge of the forces and thermal agitation for all components in the dispersion (particles, ions, and water).     

Particle-stabilized emulsions comprised of solid droplets

We kinetically stabilize oil-in-water emulsions comprising paraffin crystals by adsorbing solid particles (silica) of colloidal size at the oil/water interface. We obtain a set of emulsions that are quiescently stable for a long period of time (months), while the same emulsions are destabilized after only a few hours in the presence of surfactant molecules alone. The emulsions are submitted to a shear stress in order to probe their stability under flow conditions. Partial coalescence and gelation occur when the shear is applied for a sufficiently long period of time. The experiments reveal the existence of a critical droplet mass fraction, phi*, that defines a sharp transition between slow and fast gelation. The process of gelation is rather slow for phi < phi*, occurring at the scale of hours, and becomes almost instantaneous above phi*.     

Effect of time on the interfacial and foaming properties of beta-lactoglobulin/acacia gum electrostatic complexes and coacervates at pH 4.2

The electrostatic complexation between beta-lactoglobulin and acacia gum was investigated at pH 4.2 and 25 degrees C. The binding isotherm revealed a spontaneous exothermic reaction, leading to a DeltaHobs = -2108 kJ mol(-1) and a saturation protein to polysaccharide weight mixing ratio of 2:1. Soluble electrostatic complexes formed in these conditions were characterized by a hydrodynamic diameter of 119 +/- 0.6 nm and a polydispersity index of 0.097. The effect of time on the interfacial and foaming properties of these soluble complexes was investigated at a concentration of 0.1 wt % at two different times after mixing (4 min, referred as t approximately 0 h and t = 24 h). At t approximately 0 h, the mixture is mainly made of aggregating soluble electrostatic complexes, whereas after 24 h these complexes have already insolubilize to form liquid coacervates. The surface elasticity, viscosity and phase angle obtained at low frequency (0.01 Hz) using oscillating bubble tensiometry revealed higher fluidity and less rigidity in the film formed at t approximately 0 h. This observation was confirmed by diminishing bubble experiments coupled with microscopy of the thin film. It was thicker, more homogeneous and contained more water at t approximately 0 h as compared to t = 24 h (thinner film, less water). This led to very different gas permeability's of Kt approximately 0 h = 0.021 cm s(-1) and Kt=24 h) = 0.449 cm s(-1), respectively. Aqueous foams produced with the beta-lactoglobulin/acacia gum electrostatic complexes or coacervates exhibited very different stability. The former (t approximately 0 h) had a stable volume, combining low drainage rate and mainly air bubble disproportionation as the destabilization mechanism. By contrast, using coacervates aged for 24 h, the foam was significantly less stable, combining fast liquid drainage and air bubble destabilization though fast gas diffusion followed by film rupture and bubble coalescence. The strong effect of time on the air/water interfacial properties of the beta-lactoglobulin/acacia gum electrostatic complexes can be understood by their reorganization at the interface to form a coacervate phase that is more fluid/viscous at t approximately 0 h vs rigid/elastic at t = 24 h.     

Diketopyrrolopyrrole‐Porphyrin Conjugates with High Two‐Photon Absorption and Singlet Oxygen Generation for Two‐Photon Photodynamic Therapy

Two‐photon photodynamic therapy is a promising therapeutic method which requires the development of sensitizers with efficient two‐photon absorption and singlet‐oxygen generation. Reported here are two new diketopyrrolopyrrole‐porphyrin conjugates as robust two‐photon absorbing dyes with high two‐photon absorption cross‐sections within the therapeutic window. Furthermore, for the first time the singlet‐oxygen generation efficiency of diketopyrrolopyrrole‐containing systems is investigated. A preliminary study on cell culture showed efficient two‐photon induced phototoxicity.     

Investigating the history of prehistoric glues by gas chromatography-mass spectrometry

Although organic materials are very sensitive to biochemical alteration processes, they may be preserved for millennia in various archaeological contexts. Remains of adhesives made during prehistory were discovered at different sites, in the form of residues adhering to flint tools and ceramic vessels or as free lumps in sediment. To characterise the natural substances exploited for adhesive production during late prehistory, we undertook GC and GC/MS analysis of 90 samples from 8 sites dating from the Neolithic to Iron Age periods. This paper discusses our approach to the study of organic adhesives preserved in archaeological contexts, with a particular focus on the presentation of the various categories of organic adhesives that we analysed and the choice of chromatographic conditions adapted to the specificity of such samples. The results obtained show that birch bark tar, a triterpenoid adhesive made by destructive distillation of white birch bark, was predominantly used during the neolithic period even though other materials such as various barks or organic fossil substance were also used. During the Bronze and Iron ages, which follow the Neolithic period, adhesive production is evolving through the expansion of the range of the natural substances used (identification of diterpenoid pine resin) and the addition of beeswax as a plasticiser to birch bark tar. By combining chromatographic analysis and archaeological data, it was thus possible to follow the evolution of adhesive making at the end of prehistory, testifying to the inventiveness of the craftsmen whatever the period considered.     

Classification of signatures of Bovine Spongiform Encephalopathy in serum using infrared spectroscopy

Signatures of Bovine Spongiform Encephalopathy (BSE) have been identified in serum by means of "Diagnostic Pattern Recognition (DPR)". For DPR-analysis, mid-infrared spectroscopy of dried films of 641 serum samples was performed using disposable silicon sample carriers and a semi-automated DPR research system operating at room temperature. The combination of four mathematical classification approaches (principal component analysis plus linear discriminant analysis, robust linear discriminant analysis, artificial neural network, support vector machine) allowed for a reliable assignment of spectra to the class "BSE-positive" or "BSE-negative". An independent, blinded validation study was carried out on a second DPR research system at the Veterinary Laboratory Agency, Weybridge, UK. Out of 84 serum samples originating from terminally-ill, BSE-positive cattle, 78 were classified correctly. Similarly, 73 out of 76 BSE-negative samples were correctly identified by DPR such that, numerically, an accuracy of 94.4 % can be calculated. At a confidence level of 0.95 (alpha = 0.05) these results correspond to a sensitivity > 85% and a specificity > 90%. Identical class assignment by all four classifiers occurred in 75% of the cases while ambiguous results were obtained in only 8 of the 160 cases. With an area under the ROC (receiver operating charateristics) curve of 0.991, DPR may potentially supply a valuable surrogate marker for BSE even in cases in which a deliberate bias towards improved sensitivity or specificity is desired. To the best of our knowledge, DPR is the first and--up to now--only method which has demonstrated its capability of detecting BSE-related signatures in serum.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.