Combinatorial approach to N-substituted aminocyclitol libraries by solution-phase parallel synthesis and preliminary evaluation as glucocerebrosidase inhibitors

Libraries of N-substituted aminocyclitol derivatives of the scyllo and racemic chiro series by means of parallel solution-phase methodology with the help of robotic technology are described. Chemical diversity has been introduced by reaction of selected scaffolds with a set of aldehydes, acyl chlorides, sulfonyl chlorides, chloroformates, and amines to afford the corresponding amines, amides, sulfonamides, carbamates and ureas, respectively. The optimized methodology has proven excellent, in terms of overall purities of the resulting libraries, for the production of amides. Sulfonamides and carbamates have been obtained in slightly lower purities, while amines afforded modest results. Selected library members have been evaluated as inhibitors of recombinant glucocerebrosidase with K(i) values ranging in the low micromolar scale for the most active members.     

Optimisation of ICPMS collision/reaction cell conditions for the simultaneous removal of argon based interferences of arsenic and selenium in water samples

The optimisation of ICPMS collision/reaction cell conditions for the simultaneous analysis of arsenic and selenium is described. A mixture of 3.8 mL min⁻¹ of H₂ and 0.5 mL min⁻¹ of He was found to be suitable for the removal of both ArAr⁺ and ArCl⁺ interferences. Detection limits down to 30 ng (element) L⁻¹ in total analysis, and between 81 and 230 ng (element) L⁻¹ in speciation analysis were achieved in chloride matrix (1 g L⁻¹ NaCl). After validation, the method was applied to commercially available mineral waters.     

Pressurised solvent extraction for organotin speciation in vegetable matrices

Because organotin compounds (OTC) are widely used in many fields of activity, they have become an ubiquitous environmental presence. The presence of organotins in the environment impacts upon food safety, making it important to monitor the levels of organotin pesticides in fruits and vegetables. Nevertheless, only a few studies have been published on organotin speciation in plants. The objective of the present study was to evaluate and optimise a specific procedure based on pressurised solvent extraction (PSE) that is suitable for monitoring organotin content in vegetables. In ASE, solvents are used at elevated temperatures and pressures to increase the rate and efficiency of the extraction process. The results from this procedure were compared to those from the technique usually employed, solid/liquid extraction (SLE) performed in an acidic solvent by mechanical shaking. Three extracting solutions were tested—methanol, ethyl acetate and a mixture of methanol and ethyl acetate—and the mixture was found to give the most quantitative results while preserving the speciation. French bean and lettuce leaves as well as potato tubers were used as the plant materials. These vegetables were considered because they are the vegatables consumed in the most quantities in Europe. The study focuses on trisubstituted OTCs, which are the most toxic tin species. The samples were spiked with four trisubstituted organotins: tributyltin (TBT), triphenyltin (TPhT), tricyclohexyltin (TcHexT) and trioctyltin (TOcT). The influence of the pressure and the temperature of the PSE on the quantitativity of the process and on species preservation was evaluated using the experimental design methodology. The optimised PSE allowed detection limits down to 1–2 ng (Sn) g^–1 to be reached. These are higher than those obtained by SLE (0.1–1 ng (Sn) g^–1). Although the repeatability is similar for both PSE and SLE (2–12% for triorganotin compounds), this appears to be highly time-dependent in the case of SLE. Comparison with SLE confirms that PSE is an interesting tool for vegetable analysis considering the satisfactory OTC preservation and repeatability obtained for a relatively short extraction duration (only 15 min against 2–12 h for SLE).     

Synthesis, structure, and characterization of new mononuclear Mn(II) complexes. Electrochemical conversion into new oxo-bridged Mn(2)(III,IV) complexes. Role of chloride ions

Two Mn(II) complexes are isolated and X-ray characterized, namely, cis-[(L(2))Mn(II)(Cl)(2)] (1) and [(L(3))Mn(II)Cl(OH(2))](ClO(4)) (2(ClO(4))), where L(2) and L(3) are the well-known tetradentate N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine and N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)propane-1,3-diamine ligands, respectively. The crystal structure reveals that whereas the ligand L(2) is in the cis-alpha conformation in complex 1, the ligand L(3) is in the more unusual cis-beta conformation in 2. EPR spectra are recorded on frozen solutions for both complexes and are characteristic of Mn(II) species. Electrochemical behaviors are investigated on acetonitrile solution for both complexes and show that cation 2 exists as closely related Mn(II) species in equilibrium. For both complexes exhaustive bulk electrolyses of acetonitrile solution are performed at oxidative potential in various experimental conditions. In the presence of 2,6-lutidine and after elimination of chloride ligands, the formation of the di-mu-oxo mixed-valent complexes [(L(2))Mn(III)(mu-O)(2)Mn(IV)(L(2))](3+) (3a) and [(L(3))Mn(III)(mu-O)(2)Mn(IV)(L(3))](3+) (4) is confirmed by UV-vis and EPR spectroscopies and cyclic voltammetry. In addition crystals of 4(ClO(4))(3) were isolated, and the X-ray structure reveals the cis-alphaconformation of L(3). In the absence of 2,6-lutidine and without elimination of the exogenous chloride ions, the electrochemical oxidation of 1 leads to the formation of the mononuclear Mn(III) complex, namely, [(L(2))Mn(III)(Cl)(2)](+) (5), as confirmed by UV-vis as well as parallel mode EPR spectroscopy and cyclic voltammetry. In the same conditions, the electrochemical oxidation of complex 2 is more intricate, and a thorough analysis of EPR spectra establishes the formation of the binuclear mono-mu-oxo mixed-valent [(L(3))ClMn(III)(mu-O)Mn(IV)Cl(L(3))](3+) (6) complexes. Electrochemical conversion of Mn(II) complexes into mixed-valent Mn(2)(III,IV) oxo-bridged complexes in the presence of 2,6-lutidine is discussed. The role of the chloride ligands as well as that of L(3) in the building of oxo bridges is discussed. Differences in behavior between L(2) and L(3) are commented on.     

The Au(n) cluster probe in secondary ion mass spectrometry: influence of the projectile size and energy on the desorption/ionization rate from biomolecular solids

A Au-Si liquid metal ion source which produces Au(n) clusters over a large range of sizes was used to study the dependence of both the molecular ion desorption yield and the damage cross-section on the size (n = 1 to 400) and on the kinetic energy (E = 10 to 500 keV) of the clusters used to bombard bioorganic surfaces. Three pure peptides with molecular masses between 750 and 1200 Da were used without matrix. [M+H](+) and [M+cation](+) ion emission yields were enhanced by as much as three orders of magnitude when bombarding with Au(400) (4+) instead of monatomic Au(+), yet very little damage was induced in the samples. A 100-fold increase in the molecular ion yield was observed when the incident energy of Au(9) (+) was varied from 10 to 180 keV. Values of emission yields and damage cross-sections are presented as a function of cluster size and energy. The possibility to adjust both cluster size and energy, depending on the application, makes the analysis of biomolecules by secondary ion mass spectrometry an extremely powerful and flexible technique, particularly when combined with orthogonal time-of-flight mass spectrometry that then allows fast measurements using small primary ion beam currents.     

Study of silica supported PtxNi1-x catalysts by ion scattering spectroscopy

As supported Pt_xNi_1–x catalysts are used for hydrogenation reactions, it seemed necessary to assess the surface composition of the reduced samples. To approach the usual reduction conditions we applied in situ reduction in a reaction chamber (1 mbar H₂ up to 500 °C) placed in ultra high vacuum recipient (UHV: 10^–9 to 2.10^–10mbar). All ion scattering spectroscopy measurements were performed in UHV. Charging of the samples was avoided by electron bombardment (5 eV). The variation of the surface composition was determined after subsequent sputtering, thermal treatment at 500 °C and during oxygen adsorption. A comparison with previous results of surface compositions of binary alloys (polycrystalline foils [1, 2] and single crystals Pt_xNi_1–x [3]) is given.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday     

Spontaneous ring transformation of a 5-azido-1,2,3-thiadiazole

The reaction of 4-carbethoxy-5-chloro-1,2,3-thiadiazole ($\text{1}$) with sodium azide results in the formation of ethyl α-thiatriazolyldiazoacetate ($\text{3}$) instead of the corresponding azide ($\text{2}$). Two plausible mechanisms for this new rearrangement are formulated.     

A one shot method for divertor target shape optimization

Shape optimization methods, as commonly applied in aerodynamic design applications, have recently been adapted for use in nuclear fusion divertor target design. The resulting algorithms are very efficient compared to the standard use of numerical edge plasma simulations as analysis tools only. In this paper, we highlight some numerical aspects of the underlying algorithm, focusing on a correct, nine-point discretization of the fluxes and the need for an adjoint pressure correction equation. (© 2014 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)