Production and hydrolysis of 3,4-dimethyl-2,5-diphenyl-1,3-oxazolidine

Summary Condensation of ephedrine with benzaldehyde, an acid catalyzed reversible reaction, producing 3,4-dimethyl-2,5-diphenyl-1,3-oxazolidine, was studied. If the starting reaction mixture contained acetic acid, it quantitatively reacted with ephedrine and produced a salt functioning as an acid catalyst. On the contrary, ephedrine hydrochloride had no catalytic effect.     

Portable chemiluminescence multiplex biosensor for quantitative detection of three B19 DNA genotypes

A miniaturized multiplex biosensor exploiting a microfluidic oligonucleotide array and chemiluminescence (CL) lensless imaging detection has been developed for parvovirus B19 genotyping. The portable device consists of a reaction chip, comprising a glass slide arrayed with three B19 genotype-specific probes and coupled with a polydimethylsiloxane microfluidic layer, and a charge-coupled device camera modified for lensless CL imaging. Immobilized probes were used in DNA hybridization reactions with biotin-labeled targets, and then hybrids were measured by means of an avidin-horseradish peroxidase (HRP) conjugate and CL detection. All hybridization assay procedures have been optimized to be performed at room temperature through the microfluidic elements of the reaction chip, with sample and reagents delivery via capillary force exploiting adsorbent pads to drive fluids along the microchannels. The biosensor enabled multiplex detection of all B19 genotypes, with detectability down to 80 pmol?L^?1 for all B19 genotype oligonucleotides and 650 pmol?L^?1 for the amplified product of B19 genotype 1, which is comparable with that obtained in traditional PCR-ELISA formats and with notably shorter assay time (30 min vs. 2 h). The specificity of the assay has been evaluated by performing DNA–DNA hybridization reactions among sequences with different degrees of homology, and no cross hybridizations among B19 genotypes have been observed. The clinical applicability has been demonstrated by assaying amplified products obtained from B19 reference serum samples, with results completely consistent with the reference PCR-ELISA method. The next crucial step will be integration in the biosensor of a miniaturized PCR system for DNA amplification and for heat treatment of amplified products.

PA66/PA12/clay based nanocomposites: morphology and physical properties

The structure and the physical properties of several polyamide 66 (PA66)/polyamide 12 (PA12) blends containing different amounts of the two polymers and obtained by melt‐blending have been investigated. A low amount of organically‐modified layered silicate (OMLS, 4 wt%) has also been introduced in order to further improve the physical properties and, in particular, to evaluate its effect on the blends' structure and components' miscibility. The microstructure and morphology of all the composites were analyzed by means of X‐Ray diffraction (WAXD), transmission electron microscopy (TEM), and high resolution scanning electron microscopy (SEM), while the macroscopic scale properties (mechanical behavior and water adsorption) were assessed in order to investigate and understand the materials' structure–properties relationships. The partial miscibility of PA66 and PA12, with phase separation depending on blend composition, has been confirmed. The results also underlined the possibility to tailor the behavior of polymer blends in terms of mechanical water adsorption properties by varying the amount of PA12, added to PA66 with and without the addition of the OLMS. The effectiveness of the clay in modifying the components' miscibility as well as its tendency to segregate preferentially within separate PA66 domains have been assessed. WAXD results showed opposite effects of PA12 and clay on the crystallization behavior of PA66, an aspect that has also been deepened in another paper by the same authors discussing the results of the complete thermal characterization. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel beta-lactam antibiotics synthesized by amination of catechols using fungal laccase

Novel cephalosporins, penicillins, and carbacephems were synthesized by amination of catechols with amino-beta-lactams like cefadroxil, amoxicillin, ampicillin and the structurally related carbacephem loracarbef using laccase from Trametes sp. All isolated monoaminated products inhibited the growth of several Gram positive bacterial strains in the agar diffusion assay, among them methicillin-resistant Staphylococcus aureus strains and vancomycin-resistant Enterococci. Observed differences in the cytotoxicity and in vivo activity in a "Staphylococcus-infected, immune suppressed mouse" model are discussed.     

Application of thin titanium/titanium oxide layers deposited on gold for infrared reflection absorption spectroscopy: structural studies of lipid bilayers

Ultrathin titanium layers when deposited on the surface of gold can be successfully applied for infrared reflection absorption spectroscopy (IRRAS) investigations. It was shown that the reflectivity, the phase shift, and the mean square electric field of the p- and s-polarized IR radiation in up to 20 nm thick titanium layers covered with a 3-4 nm thick layer of native oxide are comparable to those of the air/gold interface. The surface selection rule is fulfilled. Thus, qualitative and quantitative analysis of 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) bilayers transferred in liquid expanded (LE) and liquid condensed (LC) states can be performed. Differences are found in the hydration state and molecular arrangement of the two investigated bilayers. In the DMPC bilayer in the LE state, the C-N bond in the positively charged choline moiety is inclined by approximately 70 degrees toward the surface of the negatively charged titanium substrate. In the phosphate moiety, the in-plane vector of the O-P-O group makes a small angle of approximately 15 degrees to the surface normal. This open structure of the lipid molecule corresponds to the B crystal structure of the DMPC molecule and provides space for strong hydration of the polar headgroup. In the DMPC bilayer in the LC state, the intermolecular distances are reduced; the C-N bond of the choline group makes a smaller angle to the surface normal, and the in-plane vector of the O-P-O group in the phosphate moiety displays a larger tilt. The degree of hydration is reduced. The arrangement of the polar headgroup region corresponds to the A crystal structure of the DMPC molecule.     

Cation-anion interactions involving hydrogen bonds: Syntheses and crystal structures study of hexafluorotitanate(IV) salts with pyridine and methyl substituted pyridines

Fluorotitanates (LH)₂[TiF₆]·nH₂O (1: R = pyridine, n = 1, 2: R = 2-picoline, n = 2, 3: R = 2,6-lutidine, n = 0, 4: R = 2,4,6-collidine, n = 0) and (LH)[TiF₅(H₂O)] (3a: L = 2,6-lutidine) have been synthesized by the reaction of pyridine or corresponding methyl substituted pyridines and titanium dioxide dissolved in hydrofluoric acid. The crystal structures of ionic compounds 1, 2, 3, 3a and 4 have been determined by single-crystal X-ray diffraction analysis. The hydrogen bonding led to the formation of discrete (LH)₂[TiF₆] units (4), chains (1-3), and layers (3a). The additional π-π interactions present in 1, 2, and 4 results in chain structures of 1 and 4 and in a layer structure of 2. The [TiF₆]²⁻ and [TiF₅(H₂O)]⁻ anions were observed by ¹⁹F NMR spectroscopy in aqueous solutions of 1, 2, 3, 3a and 4.     

Polysulfonylamine. XLI. Ein Silber(I)-Hydrat ungewöhnlicher Zusammensetzung: Röntgenstrukturanalytische und thermochemische Charakterisierung von Tetrakis(dimesylamido)aquatetrasilber(I) [Ag4(N(SO2CH3)2}4(H2O)]

Polysulfonyl Amines. XLI. A Silver(I) Hydrate with an Unusual Composition: Characterization of Tetrakis(dimesylamido)aquatetrasilver(I) [Ag₄(N)SO₂CH₃)₂}₄(H₂O)] by X-Ray Diffraction and Thermal Analysis The title compound is obtained by crystallizing AgN(SO₂CH₃)₂ from water at room temperature. Crystallographic data (at ?95°C): Triclinic space group P1 , a = 864.6(4), b = 1 211.2(5), c = 1 399.1(5) pm, α = 90.97(3), β = 90.90(3), γ = 98.25(4)°, V = 1.4496 nm³, Z = 2, D_x = 2.608 Mg m^?3. The four independent silver atoms and the water molecule form zigzag chains Ag(1)-Ag(2)-(μ-H₂O)-Ag(3) …? Ag(4) …? Ag(1′) with distances Ag(1)-Ag(2) 309.7, Ag(2)-O(w) 241.8, O(w)-Ag(3) 241.4, Ag(3) …? Ag(4) 342.9, Ag(4) …? Ag(1′) 361.4 pm. The catenated silver atoms are further connected by the dimesylamide anions acting as tridentate bridging (α-O, N, ω-O)-ligands. The resulting strands are interconnected into layers through one O(S)-Ag′ contact (247 pm) and one hydrogen bond O(w)-H(l) …? O′(S) per repeating unit. Between the layers, a weak O(S) …? Ag″ interaction (271 ptn) and a hydrogen bond O(w)-H(2) …? O(S) per repeating unit are observed. The silver atoms Ag(l) to Ag(4) display the coordination numbers 5 [NO,Ag(2), distorted trigonal bipyramid], 5[NO₂,O(w)Ag(I), distorted trigonal bipyramid], 5[O₄,O(w), trigonal bipyramid], and 2 + 1 (N₂, li-near; plus a secondary Ag …? 0 contact). The dehydration of the title compound and a solid-solid phase transformation in anhydrous AgN(SO₂CH₃)₂, were quantitatively investigated by thermoconductometry and time- and temperature-resolved X-ray diffractometry (TXRD).