Microwave-assisted synthesis of flower-like and leaf-like CuO nanostructures via room-temperature ionic liquids

Flower-like and leaf-like cupric oxide (CuO) single-crystal nanostructures have been successfully synthesized using ionic liquid 1-octyl-3-methylimidazolium trifluoroacetate ([Omim]TA) under the microwave-assisted approach. By controlling the concentration of [Omim]TA and reaction temperature, shape transformation of CuO nanostructures could be achieved in a short period of time. The results indicate that ionic liquid [Omim]TA plays an important role in the formation of different morphologies of CuO crystals. The crystal structure and morphology of products were characterized by X-ray powder diffraction (XRD), infrared spectrum (IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), and selected-area electron diffraction (SAED). A possible mechanism for CuO nanostructure was proposed. In addition, UV-vis spectroscopy was employed to estimate the band gap energies of CuO crystals.     

A pulsed EPR method to determine distances between paramagnetic centers with strong spectral anisotropy and radicals: The dead-time free RIDME sequence

Methods to determine distances between paramagnetic metal centers and radicals are scarce. This is unfortunate because paramagnetic metal centers are frequent in biological systems and so far have not been employed much as distance markers. Successful pulse sequences that directly target the dipolar interactions cannot be applied to paramagnetic metal centers with fast relaxation rates and large g-anisotropy, if no echos can be detected and the excitation bandwidth is not sufficient to cover a sufficiently large part of the spectrum. The RIDME method Kulik et al. (2002) [20] circumvents this problem by making use of the T₁-induced spin-flip of the transition-metal ion. Designed to measure distance between such a fast relaxing metal center and a radical, it suffers from a dead time problem. We show that this is severe because the anisotropy of the metal center broadens the dipolar curves, which therefore, only can be analyzed if the full curve is known. Here, we introduce five-pulse RIDME (5p-RIDME) that is intrinsically dead-time free. Proper functioning of the sequence is demonstrated on a nitroxide biradical. The distance between a low-spin Fe(III) center and a spin label in spin-labeled cytochrome f shows the complete dipolar trace of a transition-metal ion center and a spin label, yielding the distance expected from the structure.     

碳原子1s~22s~22pns~3P态的能量和波函数

提出了构造碳原子1s~22s~22pns~3P态波函数的新方法,以Rayleigh-Ritz变分法为基础开发了一套计算碳原子1s~22s2~2pns~3P态波函数和能量的Mathemtica程序,具体计算了碳原子1s~22s~22pns~3P(n=3～6)态的波函数和非相对论能量及其相对论修正值(包括质量修正、单体达尔文修正、双体达尔文修正、自旋-自旋接触相互作用修正),计算结果与实验值非常接近.     

Impact parameter and beam energy dependence for azimuthal asymmetry of direct photons and free protons in intermediate energy heavy-ion collisions

Hard photon emitted from energetic heavy ion collisions is of very interesting since it does not experience the late-stage nuclear interaction, therefore it is useful to explore the early-stage information of matter phase. In this work, we have calculated the impact parameter and beam energy dependence for azimuthal asymmetry, characterized by directed transverse flow parameter F and elliptic asymmetry coeffcient v2, of direct photons and the corresponding free protons in intermediate energy heavy-ion collisions. It is further shown the anti-correlated azimuthal asymmetry between direct photons and free protons.     

R717双蒸发温度回路三级混流制冷系统的研究设计

基于降低初投资、节约能源、与环境友好及符合国情的原则,从制冷剂选用和制冷系统构成两个方面,探究"超低温"冷库制冷系统的设计方案和适用技术路线,完成了以天然工质氨为制冷剂,双蒸发温度回路三级混流制冷系统的可行性研究及其关键设备的开发设计,并以此建造了具有-30℃和-60℃库温,库容分别为30吨和200吨双冷间的"超低温"实验冷库。试运行半年,完全达到设计要求,已通过山东省科技厅专家组技术鉴定。     

Photonic ultra-wideband monocycle pulses generation using semiconductor optical amplifier and electro-absorber in parallel

A scheme for photonic generation of ultra-wideband （UWB） pulses using a semiconductor optical amplifier （SOA） and an electro-absorber （EA） in parallel is proposed and numerically demonstrated. By adjusting the time delay between two pump signals incident into the SOA and the EA, we can obtain monocycle pulses with reversed polarities and different bandwidths. The proposed method is flexible in pulse shaping and easy in practical optimization.     

Optimizing Design for the Traveling Wave Electrodes in Low-Drive High-Speed Electro-Optic Polymer Modulators

Electro-optic (EO) polymer modulators are very promising in the realization of cost-effective and high-performance optical transmissions. In this article, general strategies and specific designs of the traveling wave electrodes in EO polymer modulators were presented to reduce the modulator drive power while maintaining a broadband response. The optimum device parameters and corresponding conditions were estimated using finite element method based on electrode design. In calculating the results, the comprehensive characteristics of polymer modulator with 1.21 V half-wave voltage and 91 GHz bandwidth was demonstrated with electro-optic interaction length is 20 mm, electro-optic coefficient is 55 pm/V, and operation wavelength is 1.319 μm. These results agree with the 0.8 V half-wave voltage and 30 mm electro-optic interaction length reported in Science. In the five designs presented, a hybrid electrode structure combining CPW and microstrip lines were advanced. The characteristics of this structure are like that of microstrip lines with a single-arm electrode on one arm of the waveguide, but it solves the problem of microstrip to coaxial line transition and corona polarization.     

Penetrating view of nano-structures in Aleochara verna spermatheca and flagellum by hard X-ray microscopy

A penetrating view of the three-dimensional nanostructure of female spermatheca and male flagellum in the species Aleochara verna is obtained with 100-nm resolution using a hard X-ray microscope, which provides a fast noninvasive imaging technology for insect morphology. Through introducing Zernike phase contrast and heavy metal staining, images taken at 8 keV displayed sufficient contrast for observing nanoscale fine structures, such as the spermatheca cochleate duct and the subapex of the flagellum, which have some implications for the study of the sperm transfer process and genital evolution in insects. This work shows that both the spatial resolution and the contrast characteristic of hard X-ray microscopy are quite promising for insect morphology studies and, particularly, provide an attractive alternative to the destructive techniques used for investigating internal soft tissues.     

真空中铝单丝电爆炸的实验研究

开展了铝单丝在负极性电流脉冲作用下电爆炸特性的研究.利用皮秒激光探针,搭建了阴影、纹影和干涉的光学诊断平台,得到了不镀膜铝丝典型的能量沉积过程,在电压崩溃时刻其沉积能量为2.4 eV/atom.为了增加金属丝内的沉积能量,开展了相同电参数及金属丝尺寸下的镀膜铝丝电爆炸实验,其沉积能量可达到5 eV/atom,实现了在电压崩溃之前铝丝完全气化(完全气化所需能量为4 eV/atom).阴影图像展示了高密度丝核区域的膨胀过程,不镀膜铝丝平均膨胀速度为2.2 km/s,而镀膜铝丝因为沉积能量大,其膨胀速度约为不镀膜铝丝的2.3倍,高密度区域膨胀速度为5 km/s.由于阴影不能反映低密度等离子体的膨胀,开展了平行双丝实验,通过测量自发光辐射,估算了低密度等离子体的膨胀速度.利用条纹相机拍摄了不镀膜铝丝电爆炸过程中自发光区域的图像.纹影图像清晰地展示了不镀膜铝丝在电爆炸过程中形成的核冕结构,而镀膜铝丝电爆炸过程中核冕结构得到了一定程度的抑制.从干涉图像计算了相移,在轴对称假设下对相移进行阿贝尔逆变换,重构了三维的铝原子数密度分布.     

A novel carbon source coated on C-LiFePO<Subscript>4</Subscript> as a cathode material for lithium-ion batteries

The poor electronic conductivity and low lithium-ion diffusion are the two major obstacles to the largely commercial application of LiFePO₄ cathode material in power batteries. In order to improve the defects of LiFePO₄, a novel carbon source polyacrylonitrile (PAN), which would form the hierarchical porous structure after carbonization, is fabricated and used. This work comes up with a simple and facile carbothermal reduction method to prepare porous-carbon-coated LiFePO₄ (C-LiFePO₄-PC) composite and to study the effect of carbon-coated temperature on ameliorating the electrochemical performance. The obtained C-LiFePO₄-PC composite shows a high initial discharge capacity of 164.1 mA h g^?1 at 0.1 C and good cycling stability as well as excellent rate capacity (49.0 mA h g^?1 at 50 C). The most possible factors that improve the electrochemical performance could be related to the enhancement of electronic conductivity and the existence of porous carbon layers. In a word, the C-LiFePO₄-PC material would become an excellent candidate for application in the fields of lithium-ion batteries.