Dynamics and spectra of excited states of water-micellar suspensions of single-walled carbon nanotubes

The dynamics of the photoinduced differential absorption and excited-state bleaching spectra of single-walled carbon nanotubes suspended in a micellar solution were studied in the spectral range from 40 to 1000 nm within a time interval from 70 fs to 150 ps under excitation by 50-fs pulses with photon energies 2 and 4 eV. The bleaching and absorption bands were observed in the spectra; the positions of the bleaching peaks were independent of the photon energy of the exciting femtosecond pulse in the range 2–4 eV. It was established that, for delay times shorter than 1 ps, the shape of the differential spectrum of excited nanotubes coincided with the shape of the second derivative of the absorption spectrum of unexcited nanotubes in the frequency range of exciting pulse above 18000 cm^?1 (the range of absorption bands of metallic nanotubes). In the frequency range below 16000 cm^?1 (the range of absorption peaks of semiconducting nanotubes), the bleaching peaks in the differential spectrum of excited nanotubes undergo a high-frequency shift of 200–300 cm^?1 with respect to the second-derivative spectrum of unexcited nanotubes. The excited-state relaxation rate constants were measured. They are well approximated by the exponential dependences and depend on the probe-pulse wavelength. An assumption was made about the nature of the observed spectra of excited nanotubes and about the excitation relaxation.     

Measurement of apex angle of the prism using total internal reflection

Total internal reflection technique is examined critically for the measurement of apex angle of the prism. Recognition of the critical boundary completely specifies the apex angle ‘A’ of the prism by keeping constant the ratio of refractive index of sample fluid (n₁=1.4) to that of glass (n₂=1.7). Recording of observations in the laboratory is dependent upon whether the apex angle ‘A’ of prism is greater than or less than or equal to critical angle ‘r_c’. The minimum value of error function ‘χ’ in the proximity of Abbe angle explain the choice of Abbe type instruments and shown invariant by relating positive ‘₊’ and the negative angle of emergence ‘₋’. Using ray-tracing technique, an expression for the length of the critical boundary ‘l’ is derived and is shown as a measure of the apex angle ‘A’ of the prism.

The choice of the realistic grazing condition leads us to two turning points for which error function ‘χ’ is minimal and yields appropriate option of the measurement of apex angle ‘A’ of the prism. It is further shown that the small error ‘ζ’ crept in the apex angle ‘A’ of the prism can lead to a significant error in the design of Pulfrich type instruments.

Experimental measurements are in-line with the predictions made.     

Selective photorefractive scattering in LiNbO<Subscript>3</Subscript>:Rh crystals

Photorefractive scattering occurs in rhodium-doped lithium niobate crystals irradiated by coherent light. The photorefractive scattering has both wide-angle and selective components. The results of experimental investigation of selective photorefractive scattering in LiNbO₃:Rh crystals and calculation of the spatial structure of scattering are reported. The selective scattering is regarded as a kind of a frequency-degenerate fourwave vector interaction.     

A comparison of shell theories for large-amplitude vibrations of circular cylindrical shells: Lagrangian approach

Large-amplitude (geometrically non-linear) vibrations of circular cylindrical shells subjected to radial harmonic excitation in the spectral neighbourhood of the lowest resonances are investigated. The Lagrange equations of motion are obtained by an energy approach, retaining damping through Rayleigh's dissipation function. Four different non-linear thin shell theories, namely Donnell's, Sanders-Koiter, Flügge-Lur’e-Byrne and Novozhilov's theories, which neglect rotary inertia and shear deformation, are used to calculate the elastic strain energy. The formulation is also valid for orthotropic and symmetric cross-ply laminated composite shells. The large-amplitude response of perfect and imperfect, simply supported circular cylindrical shells to harmonic excitation in the spectral neighbourhood of the lowest natural frequency is computed for all these shell theories. Numerical responses obtained by using these four non-linear shell theories are also compared to results obtained by using the Donnell's non-linear shallow-shell equation of motion. A validation of calculations by comparison with experimental results is also performed. Both empty and fluid-filled shells are investigated by using a potential fluid model. The effects of radial pressure and axial load are also studied. Boundary conditions for simply supported shells are exactly satisfied. Different expansions involving from 14 to 48 generalized co-ordinates, associated with natural modes of simply supported shells, are used. The non-linear equations of motion are studied by using a code based on an arclength continuation method allowing bifurcation analysis.     

Rain Attenuation at 103 GHz in Millimeter Wave Ranges

We have conducted a millimeter wave propagation experiment at 103 GHz (2.9 mm) on a propagation path of 390 m. The results were compared with the rain attenuation calculations from the Marshall-Palmer, Best, Joss-Thomas-Waldvogel and Weibull distributions for raindrop-size. It has been shown that the Weibull distribution has a good agreement with the experiments.     

Dielectric investigations of associate formation process in thin nitrobenzene interlayers formed between metal substrates

Studies of thickness and temperature dependencies of the dielectric susceptibility of nitrobenzene interlayers formed on conductive substrates were carried out. The obtained data were processed under the assumption of the existence of dimers (with opposite directions of molecular dipole moments) in orientationally ordered wall-adjacent layers. The results were treated on the basis of Lifshits theory.     

A WKB analysis of the buckling condition for a cylindrical shell of arbitrary thickness subjected to an external pressure

We consider the plane-strain buckling of a cylindrical shellof arbitrary thickness which is made of a Varga material andis subjected to an external hydrostatic pressure on its outersurface. The WKB method is used to solve the eigenvalue problemthat results from the linear bifurcation analysis. We show thatthe circular cross-section buckles into a non-circular shapeat a value of µ₁ which depends on A₁/A₂ and a mode number,where A₁ and A₂ are the undeformed inner and outer radii, andµ₁ is the ratio of the deformed inner radius to A₁. Inthe large mode number limit, we find that the dependence ofµ₁ on A₁/A₂ has a boundary layer structure: it is constantover almost the entire region of 0 < A₁/A₂ < 1 and decreasessharply from this constant value to unity as A₁/A₂ tends tounity. Our asymptotic results for A₁ – 1 = O(1) and A₁– 1 = O(1/n) are shown to agree with the numerical resultsobtained by using the compound matrix method.     

Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

Activity of microemulsion-based nanoparticles at the human bio-nano interface: concentration-dependent effects on thrombosis and hemolysis in whole blood

Background: Although microemulsion-based nanoparticles (MEs) may be useful for drug delivery or scavenging, these benefits must be balanced against potential nanotoxicological effects in biological tissue (bio-nano interface). We investigated the actions of assembled MEs and their individual components at the bio-nano interface of thrombosis and hemolysis in human blood. Methods: Oil-in-water MEs were synthesized using ethylbutyrate, sodium caprylate, and pluronic F-68 (ME4) or F-127 (ME6) in 0.9% NaCl_w/v. The effects of MEs or components on thrombosis were determined using thrombo-elastography, platelet contractile force, clot elastic modulus, and platelet counting. For hemolysis, ME or components were incubated with erythrocytes, centrifuged, and washed for measurement of free hemoglobin by spectroscopy. Results and conclusions: The mean particle diameters (polydispersity index) for ME6 and ME4 were 23.6 ± 2.5 nm (0.362) and 14.0 ± 1.0 nm (0.008), respectively. MEs (0, 0.03, 0.3, 3 mM) markedly reduced the thromboelastograph maximal amplitude in a concentration-dependent manner (49.0 ± 4.2, 39.0 ± 5.6, 15.0 ± 8.7, 3.8 ± 1.3 mm, respectively), an effect highly correlated (r2 = 0.94) with similar changes caused by pluronic surfactants (48.7 ± 10.9, 30.7 ± 15.8, 20.0 ± 11.3, 2.0 ± 0.5) alone. Neither oil nor sodium caprylate alone affected the thromboelastograph. The clot contractile force was reduced by ME (27.3 ± 11.1–6.7 ± 3.4 kdynes/cm², P = 0.02, n = 5) whereas the platelet population not affected (175 ± 28–182 ± 23 10⁶/ml, P = 0.12, n = 6). This data suggests that MEs reduced platelet activity due to associated pluronic surfactants, but caused minimal changes in protein function necessary for coagulation. Although pharmacological concentrations of sodium caprylate caused hemolysis (EC₅₀ = 213 mM), MEs and pluronic surfactants did not disrupt erythrocytes. Knowledge of nanoparticle activity and potential associated nanotoxicity at this bio-nano interface enables rational ME design for in vivo applications.