可动氧与载体对钴基催化剂的乙烷氧化脱氢性能的影响

 报道了未担载的氧化钴与担载在SiO2和Al2O3上的氧化钴的乙烷氧化脱氢行为,发现未担载的氧化钴在150℃的低温下就有活性．XRD研究表明,Co3O4为活性晶相组分,其含量与催化剂的焙烧温度密切相关,经500℃和1000℃焙烧的未担载的氧化钴中Co3O4晶相分别占100％和66％．对于担载型氧化钴催化剂,载体与氧化钴间的相互作用以及不同的氧化钴担载量导致催化性能发生明显改变．氧化钴与载体间的作用越强,催化活性越低．Co3O4也是担载型氧化钴催化剂的活性晶相．催化剂的O2－TPD－MS和H2－TPR研究结果表明,反应的活性氧物种为在低温下易脱除和易还原并具有较高流动性的可动氧．     

A Recyclable Trinuclear Bifunctional Catalyst Derived from a Tetraoxo Bis‐Zn(salphen) Metalloligand

A tetraoxo bis‐Zn(salphen) supramolecular host can bind various divalent metal salts, thereby providing access to trinuclear bifunctional systems that incorporate both Lewis acid sites and dynamically bound nucleophilic anions. The formation of these trinuclear species was investigated and their stability features were also determined. The application of these trinuclear complexes as bifunctional catalysts was evaluated in the formation of cyclic organic carbonates from epoxides and CO₂. The catalytic data, in combination with control experiments, clearly demonstrate that these trinuclear compounds show much higher recycling potential compared to various control compounds and they can be used in up to five cycles without an observable loss in activity. Furthermore, this new recyclable catalytic system does not require any additives and can be applied under solvent‐free conditions.     

Multiply Nitrated High‐Energy Dense Oxidizers Derived from the Simple Amino Acid Glycine

Various energetic polynitro esters, carbamates, and nitrocarbamates that were derived from the amino acid glycine were fully characterized by single‐crystal X‐ray diffraction, vibrational spectroscopy (IR and Raman), multinuclear NMR spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). Owing to their positive oxygen balance, the suitability of these compounds as potential oxidizers in energetic formulations was investigated and discussed. In addition, the heats of formation of the products were calculated by using the Gaussian 09 program package at the CBS‐4M level of theory. From these values and the calculated densities (from the X‐ray data), several detonation parameters, such as detonation pressure, velocity, energy, and temperature, were computed by using the EXPLO5 code. Furthermore, their sensitivities towards impact, friction, and electrostatic discharge were tested by using a drop hammer, a friction tester (both BAM certified), and a small‐scale electrical‐discharge device, respectively.     

Nucleoside Analogues with a 1,3‐Diene?Fe(CO)3 Substructure: Stereoselective Synthesis,Configurational Assignment,and Apoptosis‐Inducing Activity

The synthesis and stereochemical assignment of two classes of iron‐containing nucleoside analogues, both of which contain a butadiene? Fe(CO)₃ substructure, is described. The first type of compounds are Fe(CO)₃‐complexed 3′‐alkenyl‐2′,3′‐dideoxy‐2′,3′‐dehydro nucleosides (2,5‐dihydrofuran derivatives), from which the second class of compounds is derived by formal replacement of the ring oxygen atom by a CH₂ group (carbocyclic nucleoside analogues). These compounds were prepared in a stereoselective manner through the metal‐assisted introduction of the nucleobase. Whilst the furanoid intermediates were prepared from carbohydrates (such as methyl‐glucopyranoside), the carbocyclic compounds were obtained by using an intramolecular Pauson–Khand reaction. Stereochemical assignments based on NMR and CD spectroscopy were confirmed by X‐ray structural analysis. Biological investigations revealed that several of the complexes exhibited pronounced apoptosis‐inducing properties (through an unusual caspase 3‐independent but ROS‐dependent pathway). Furthermore, some structure–activity relationships were identified, also as a precondition for the design and synthesis of fluorescent and biotin‐labeled conjugates.     

At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics

In this paper we report a centrifugal microfluidic “lab-on-a-disc” system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL⁻¹ of hIgG.     

Combating Multidrug‐Resistant Bacteria: Current Strategies for the Discovery of Novel Antibacterials

The introduction of effective antibacterial therapies for infectious diseases in the mid‐20th century completely revolutionized clinical practices and helped to facilitate the development of modern medicine. Many potentially life‐threatening conditions became easily curable, greatly reducing the incidence of death or disability resulting from bacterial infections. This overwhelming historical success makes it very difficult to imagine life without effective antibacterials; however, the inexorable rise of antibiotic resistance has made this a very real and disturbing possibility for some infections. The ruthless selection for resistant bacteria, coupled with insufficient investment in antibacterial research, has led to a steady decline in the efficacy of existing therapies and a paucity of novel structural classes with which to replace them, or complement their use. This situation has resulted in a very pressing need for the discovery of novel antibiotics and treatment strategies, the development of which is likely to be a key challenge to 21st century medicinal chemistry.     

DOT2: Macromolecular docking with improved biophysical models

Computational docking is a useful tool for predicting macromolecular complexes, which are often difficult to determine experimentally. Here, we present the DOT2 software suite, an updated version of the DOT intermolecular docking program. DOT2 provides straightforward, automated construction of improved biophysical models based on molecular coordinates, offering checkpoints that guide the user to include critical features. DOT has been updated to run more quickly, allow flexibility in grid size and spacing, and generate an infinitive complete list of favorable candidate configurations. Output can be filtered by experimental data and rescored by the sum of electrostatic and atomic desolvation energies. We show that this rescoring method improves the ranking of correct complexes for a wide range of macromolecular interactions and demonstrate that biologically relevant models are essential for biologically relevant results. The flexibility and versatility of DOT2 accommodate realistic models of complex biological systems, improving the likelihood of a successful docking outcome. © 2013 Wiley Periodicals, Inc.