Hydrothermal Synthesis of Two New Transition Metal Coordination Polymers with Mixed Ligands

Hydrothermal reactions of 1, 2, 4‐benzenetricarboxylic acid, 1, 10‐phenanthroline and transition metal cations including Zn^II or Co^II, in basified aqueous solution gave rise to two complexes, [Zn₃(btrc)₂(1, 10‐phen)₂(H₂O)₂]_n ( 1 ), and [Co₃(btrc)₂(1, 10‐phen)₂(H₂O)₂]_n ( 2 ) (btrc = 1, 2, 4‐benzenetricarboxylate, and 1, 10‐phen = 1, 10‐phenanthroline). 1 2 crystalize isotypically in the triclinic space group P1¯. The btrc ligand acts as multi‐dentate bridging ligand in both compound 1 and 2 to link up transition metal atoms into lamella networks, which are further attached into three‐dimensional frameworks through complex hydrogen bonding and π‐π interactions. The photoluminescence spectrum for compound 1 has also been studied. The corresponding reaction with Cu²⁺ follows another pathway.     

Gas phase thermolysis of cyclohexyl thiol

The pyrolysis of cyclohexyl thiol has been studied in a static system at subambient pressures in the temperature range 420–497°C. It is proposed that in the presence of a large excess of cyclohexene the mechanism is a radical non-chain process.

---

, , 420–497°C. , .

     

Cooperative hydrogen-bonding effects in a water square: a single-crystal neutron and partial atomic charges and hardness analysis study

Four isomorphous complexes of formula [M(L)(4)(H(2)O)(2)]SO(4).2H(2)O (M = Co, 1a; Ni, 1b; Cu, 1c; Zn, 1d) have been isolated and characterized by single-crystal X-ray diffraction and neutron diffraction using the quasi-Laue diffractometer VIVALDI at the Institut Laue-Langevin as well as by thermogravimetric analysis. The structures contain a discrete, strongly hydrogen-bonded water tetramer which causes a significant distortion of the metal coordination sphere in each case. Partial atomic charges and hardness analysis (PACHA) calculations reveal that the shortest hydrogen bonds are not the strongest in this constrained, cyclic solid-state structure and show that the distortion at the metal center is caused by the drive to maintain the integrity of the water tetramer. The system undergoes a disorder-order transition on slow cooling that provides insight into the nature of communication between water squares.     

Solubility Measurements of Surfactants and Dissolution of Cytochrome c in 1,1,1,2‐Tetrafluoroethane Modified with Organic Solvents

The solubilities of four surfactants, sodium bis‐2‐ethylhexyl sulfosuccinate (AOT), cetyltrimethylammonium chloride, didodecyldimethylammonium bromide, and n‐dodecyltrimethylammonium chloride in liquid refrigerant 1,1,1,2‐tetrafluoroethane (R134a) modified with methanol, ethanol, and 2‐propanol were measured. The measurements were performed under 25 and 50 bar at 25 °C. The solubility of AOT was as high as 92 mM in R134a with addition of 2% ethanol. Cytochrome c molecules were then verified to be soluble in the AOT‐containing and ethanol‐modified R134a solution. Accordingly, liquid R134a is suggested as a potential extraction solvent for hydrophilic compounds.     

RNA Methylation m6A: A New Code and Drug Target?

The m⁶A‐RNA modification is a dynamic and reversible process, which has emerged as a new RNA code for the regulation of gene expression. The functional network of methyltransferases (writers), demethylases (erasers), and binding proteins (readers) modulate the level of m⁶A modification. Dysfunction of RNA methylation has been associated with various fundamental biological processes and human diseases. Herein, we briefly introduce an understanding‐enabled manipulation on m⁶A‐RNA modification with an emphasis on the use of small‐molecule intervention.      

Rapid prototyping of polymer microsystems via excimer laser ablation of polymeric moulds

This study presents a novel method for rapid prototyping of polymer microsystems. The method is based on excimer laser ablation of a thermally and mechanically stable polymer, such as PEEK (poly-ether-ether-ketone). A negative of the desired microsystem is laser machined in PEEK, which can then be used directly for hot embossing or injection moulding of a series of prototypes. This approach is very rapid and considerably cheaper than more traditional approaches to toolmaking, while still performing well in terms of reproduction of tool dimensions. The reduction in time and cost for a master tool using this method opens up new possibilities for testing small series in the R&D phase of a microsystem. Finally, two particular applications of the technique are presented.     

Mass spectral fragmentation patterns of heterocycles. IV . Tetracyclic phenothiazines. IX. Electron impact promoted mass spectral fragmentation of pyrrolo[3,2,1-kl]phenothiazine

The mass spectral fragmentation patterns of pyrrolo[3, 2, 1-kl]phenothiazine ( 1 ) and its 1, 10-dideuterioderi-vative [2] are reported. The site of deuterium substitution in 2 was established by examination of its ¹³C nuclear magnetic resonance spectrum. The heteroaromatic stability of 1 to electron impact is exemplified by the occurrence of the molecular ion as the base peak and the formation of a reasonably intense M²⁺ ion. An intense M-1 ion is also observed. The more abundant fragment ions appear to result from sulfur ionization. Fragment ions arising from ionization of the nitrogen constitute only a small fraction of the total ion current. Proposed fragmentation pathways of 1 are supported by the detection of appropriate metastable ions, exact mass measurements, and electron impact spectrum of 2 .     

Bulk versus interfacial aqueous solvation of dicarboxylate dianions

Solvation of dicarboxylate dianions of varying length of the aliphatic chain in water clusters and in extended aqueous slabs was investigated using photoelectron spectroscopy and molecular dynamics simulations. Photoelectron spectra of hydrated succinate, adipate, and tetradecandioic dianions with up to 20 water molecules were obtained. Even-odd effects were observed as a result of the alternate solvation mode of the two negative charges with increasing solvent numbers. The competition between hydrophilic interactions of the charged carboxylate groups and hydrophobic interactions of the aliphatic chain leads to conformation changes in large water clusters containing dicarboxylates bigger than adipate. It also leads to a transition from bulk aqueous solvation of small dicarboxylates to solvation at the water/vapor interface of the larger ones. Whereas oxalate and adipate solvate in the inner parts of the aqueous slab, suberate and longer dicarboxylate dianions have a strong propensity to the surface. This transition also has consequences for the folding of the flexible aliphatic chain and for the structure of aqueous solvation shells around the dianions.     

Strong Attraction of Caffeine to the Mercurous Dumbbell in the Salt [Hg2(Caf)2](ClO4)2(H2O)2

Colourless single crystals of the caffeine adduct of mercurous perchlorate dihydrate, [Hg₂(Caf)₂](ClO₄)₂(H₂O)₂, were grown from aqueous solutions of mercurous perchlorate and caffeine by isothermal evaporation at ambient temperature. The crystal structure (monoclinic, P2₁/n, Z = 4, a = 1628.0(2), b = 780.4(1), c = 2229.6(3) pm, β = 99.84(1)°, R₁(all data) = 0.0894) contains [trans‐Caf‐Hg‐Hg‐Caf]²⁺ cations with a Hg‐Hg distance of 250.88(6) pm, Hg‐N (bond) distances of 214.4(6) and 215.1(6) pm and Hg‐Hg‐N angles of 176.9(2) and 165.1(2)°, respectively. These cations are attached via weak Hg‐O contacts to dimers which are further arranged to leave large channels into which one crystal water molecule is included. The second water molecule and the two perchlorate anions are weakly attracted to one Hg atom.     

Morphology and thermal properties of a PC/PE blend with reactive compatibilization

Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC‐graft‐ethylene‐co‐acrylic acid (PC‐graft‐EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene‐acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC‐graft‐EAA. Copyright © 2007 John Wiley & Sons, Ltd.