Adhesive transfer of thin viscoelastic films

Micellar suspensions of acrylic diblock copolymers are excellent model materials for studying the adhesive transfer of viscoelastic solids. The micellar structure is maintained in films with a variety of thicknesses, giving films with a well-defined structure and viscoelastic character. Thin films were cast onto elastomeric silicone substrates from micellar suspensions in butanol, and the adhesive interactions between these coated elastomeric substrates and a rigid indenter were quantified. By controlling the adhesive properties of the film/indenter and film/substrate interfaces we were able to obtain very clean transfer of the film from the substrate to the portion of the glass indenter with which the film was in contact. Adhesive failure at the film/substrate interface occurs when the film/indenter interface is able to support an applied energy release rate that is sufficient to result in cavity nucleation at the film/substrate interface. Cavity formation is rapidly followed by delamination of the entire region under the indenter. The final stage in the transfer process involves the failure of the film that bridges the indenter and the elastomeric substrate. This film is remarkably robust and is extended to three times its original width prior to failure. Failure of this film occurs at the periphery of the indenter, giving a transferred film that conforms to the original contact area between the indenter and the coated substrate.     

Carbon nanotube array-based biosensor

Aligned multi-wall carbon nanotubes (MWNT) grown on platinum substrate are used for the development of an amperometric biosensor. The opening and functionalization by oxidation of the nanotube array allows for the efficient immobilization of the model enzyme, glucose oxidase. The carboxylated open-ends of nanotubes are used for the immobilization of the enzymes, while the platinum substrate provides the direct transduction platform for signal monitoring. It is also shown that carbon nanotubes can play a dual role, both as immobilization matrices and as mediators, allowing for the development of a third generation of biosensor systems, with good overall analytical characteristics.     

An electron spin resonance study of radicals from chloramine-t-1 : Spin trapping of radicals produced in acid media

Under acid conditions aqueous solutions of chloramine-T form nitrogen-centred radicals via loss of the chlorine atom. The nitrogen radicals produced have been studied by ESR spectroscopy using the spintrapping method. Adducts of the spin trap phenyl-t-butyl nitrone are oxidized by chloramine-T in acid media to give a paramagnetic product in which the unpaired electron interacts with two inequivalent nitrogen atoms. The spin trap 5,5-dimethyl-2-pyrrolidine-1 -oxide is oxidized rapidly to 5,5-dimethyl-2-pyrrolidone-1-oxyl by chloramine-T under acid onditions. The water soluble trap α-4-pyridyl-1-oxide-N-t-butyl nitrone forms a stable nitroxide adduct with a nitrogen radical of chloramine-T in acid solution. Identical results were obtained with chloramine-B (sodium salt of N-chlorobenzene sulfonamide), indicating the involvement of the N-chloramine group in radical formation.     

The Enantioselective Synthesis of 3-Methoxy-1, 3, 5 (10)-estratrien-11, 17-dione by a Thermal Intramolecular Cycloaddition Reaction. Preliminary communication

The enantiomerically pure (+)-3-methoxy-1, 3, 5 (10)-estratrien-11, 17-dione 11 (with trans-anti-trans configuration) was synthesized in a highly stereocontrolled fashion from (±)-t-butyl 4-methoxy-1-benzocyclobutene carboxylate (8) and the (+)-carboxylic acid 6 , obtained from 4 in two steps, followed by one crystallization of the (+)-ephedrine salt. The key step 10→11 (Scheme 2) involves a thermal intramolecular cycloaddition reaction.     

Binary mixtures based on polycaprolactone and cellulose derivatives

Pyrolytic process has a promising potential for the environmentally friendly upgrading of lignocellulosic and plastic waste. Thermogravimetry and pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) were used to get information about the reactive decomposition of PCL in binary mixtures with microcrystalline cellulose (MC) or sisal fibres (SF). Preliminary thermogravimetric investigation showed that biomass is thermally degraded at lower temperatures than PCL and this process has a predominant influence on the thermal behaviour of the mixtures. Discrepancies between the experimental and predicted TG/DTG profiles were considered as a measurement of the extent of interactions occurring on co-pyrolysis. It was found that reactivity of PCL was slightly increased in PCL-SF binary mixtures. Evolution of acidic products from cellulose and hemicelluloses decomposition may promote PCL degradation in binary mixtures with SF. It seems that the co-pyrolysis process could have potential for the environmentally friendly transformation of biocomposites.     

Electrocatalytic Proton Reduction by a Cobalt Complex Containing a Proton-Responsive Bis(alkylimdazole)methane Ligand: Involvement of a C−H Bond in H2 Formation

Homogeneous electrocatalytic proton reduction is reported using cobalt complex [ 1 ](BF₄)₂. This complex comprises two bis(1-methyl-4,5-diphenyl-1H-imidazol-2-yl)methane (HBMIM ) ligands that contain an acidic methylene moiety in their backbone. Upon reduction of [ 1 ](BF₄)₂ by either electrochemical or chemical means, one of its HBMIM ligands undergoes deprotonation under the formation of dihydrogen. Addition of a mild proton source (acetic acid) to deprotonated complex [ 2 ](BF₄) regenerates protonated complex [ 1 ](BF₄)₂. In presence of acetic acid in acetonitrile solvent [ 1 ](BF₄)₂ shows electrocatalytic proton reduction with a k_obs of ≈200 s⁻¹ at an overpotential of 590 mV. Mechanistic investigations supported by DFT (BP86) suggest that dihydrogen formation takes place in an intramolecular fashion through the participation of a methylene C−H bond of the HBMIM ligand and a Co^II−H bond through formal heterolytic splitting of the latter. These findings are of interest to the development of responsive ligands for molecular (base)metal (electro)catalysis.     

Kristallstrukturanalyse von Ammonium-catena-polyphosphat II mit Röntgenpulvertechniken

Crystal Structure Determination of Ammonium catena-Polyphosphate II by X-Ray Powder Techniques The first structure determination of one of the five modifications of ammonium-catena-polyphosphate was performed using X-ray powder diffraction data. (NH₄PO₃)_nII is formed by phase transformation of (NH₄PO₃)_nI which on its part is obtained by condensation of NH₄H₂PO₄ at 200°C in presence of urea. Modification II crystallizes in P2₁2₁2₁ (a = 1 207.9(1), b = 648.87(8), c = 426.20(4) pm; Z = 4; 291 observed reflections; R(p) = 0.089; R(wp) = 0.111; R(I, hkl) = 0.088). The chain-anion runs parallel to the shortest axis, the period of identity is two. The ammonium ion is surrounded by a distorted tetrahedron of oxygen atoms (N? O-distances range from 285 to 292 pm, hydrogen bonds of middle strength).     

Unusual heme-histidine bond in the active site of a chaperone

The heme chaperone CcmE is essential for the delivery of heme to c-type cytochromes. It forms an unusual transient, yet covalent, bond between an essential histidine, H130, and heme. We report on the discovery of the chemical structure of this bond solved by NMR, where the heme vinyl is cross-linked at the beta carbon to the Ndelta1 of H130. As this type of heme linkage has not been described previously in any cytochrome or hemoprotein, it represents a novel type of heme-histidine complex.     

Methylene-azaphosphirane as a reactive intermediate

Reaction of the transient phosphinidene complexes R-P=W(CO)5 with N-substituted-diphenylketenimines leads unexpectedly to the novel 2-aminophosphindoles, as confirmed by an X-ray crystal structure determined for one of the derivatives. Experimental evidence for a methylene-azaphosphirane intermediate was found by using the iron-complexed phosphinidene iPr2N-P=Fe(CO)4, which affords the 2-aminophosphindole together with the novel methylene-2,3-dihydro-1H-benzo[1,3]azaphosphole. Analysis of the reaction pathways with DFT indicates that the initially formed methylene-azaphosphirane yields both phosphorus heterocycles by way of a [1,5]- or [1,3]-sigmatropic shift, respectively, followed by a H-shift. Strain underlies both rearrangements, which causes these remarkably selective conversions that can be tuned by changing the substituents.     

Electrodynamic investigations of conduction processes in humid microcrystalline cellulose tablets

The conduction mechanism in microcrystalline cellulose (MCC) tablets at varying relative humidity (RH) has been investigated by using the techniques of low frequency dielectric spectroscopy and transient current analysis at room temperature. The dependence on RH on the measured conductivity and charge carrier density indicates that a high-power-law-exponent percolation process of cations being conducted on water molecules occupying available 6-OH units on the cellulose chains is the dominating dc conduction mechanism at RH below 3 wt % of moisture content. The experimentally observed decrease in charge carrier mobility with increasing moisture content shows that protons and H3O+ ions that are being blocked at empty 6-OH sites also contribute to the charge transport process in cellulose at low moisture contents.