Trapping of a Highly Reactive Oxoiron(IV) Complex in the Catalytic Epoxidation of Olefins by Hydrogen Peroxide

The generation of a nonheme oxoiron(IV) intermediate, [(cyclam)Fe^IV(O)(CH₃CN)]²⁺ ( 2 ; cyclam=1,4,8,11‐tetraazacyclotetradecane), is reported in the reactions of [(cyclam)Fe^II]²⁺ with aqueous hydrogen peroxide (H₂O₂) or a soluble iodosylbenzene (sPhIO) as a rare example of an oxoiron(IV) species that shows a preference for epoxidation over allylic oxidation in the oxidation of cyclohexene. Complex 2 is kinetically and catalytically competent to perform the epoxidation of olefins with high stereo‐ and regioselectivity. More importantly, 2 is likely to be the reactive intermediate involved in the catalytic epoxidation of olefins by [(cyclam)Fe^II]²⁺ and H₂O₂. In spite of the predominance of the oxoiron(IV) cores in biology, the present study is a rare example of high‐yield isolation and spectroscopic characterization of a catalytically relevant oxoiron(IV) intermediate in chemical oxidation reactions.     

Optimisation of a key cross-coupling reaction towards the synthesis of a promising antileishmanial compound

During the course of a research program aimed at identifying novel antileishmanial compounds, a multi-gram synthesis of N-(trans-4-((4-methoxy-3-((R)-3-methylmorpholino)-1H-pyrazolo[3,4-d]pyrimidin-6-yl)amino)cyclohexyl)-2-methylpropane-1-sulfonamide ((R)-1) was required. This letter describes optimisation of the reaction conditions and protecting group strategy for a key Buchwald-Hartwig coupling, delivering the required quantities of (R)-1, as well as further compounds in the series.     

Direct quantitation of volatile organic compounds in packaging materials by headspace solid-phase microextraction-gas chromatography-mass spectrometry

The quantification of volatile organic compounds (VOCs) in flexible multilayer packaging materials using headspace solid-phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) was studied. The analytes imclude 22 compounds such as aldehydes. ketones, carboxylic acids and hydrocarbons formed by thermooxidative degradation of polyethylene during the extrusion coating process in the manufacture of the packaging, and many of them are involved in the unpleasant and undesirable odour of these materials. External standard calibration using a solution of the analytes in an appropriate solvent was the first approach studied. Aqueous solutions of the analytes provided low reproducibility and the reduction of aldehydes to alcohols under the HS-SPME conditions. Hexadecane was chosen as the solvent since its polarity is similar to that of polyethylene and its volatility is lower than that of the analytes. However, hexadecane should be added to the sample before the analysis as it modifies the absorption capacity of the fibre. A 75-microm Carboxen-poly(dimethylsiloxane) fibre was used to extract the VOCs from the headspace above the packaging in a 15-ml sealed vial at 100 degrees C after 5 min of preincubation. The influence of the extraction time on the amount extracted was studied for a standard solution of the analytes in hexadecane, together with the influence of the volume of the standard solution and the amount of the sample placed in the vial. Standard addition and multiple HS-SPME were also studied as calibration methods and the results obtained in the quantitative analysis of a packaging material were compared.     

Colloidal liquid crystal type assemblies of spheroidal polystyrene core/polyglycidol‐rich shell particles (P[S/PGL]) formed at the liquid‐silicon‐air interface by a directed dewetting process

A method for the preparation of stripe‐like monolayers of microspheroids is described. The particles were obtained from polystyrene core/polyglycidol‐rich shell microspheres by stretching poly (vinyl alcohol) films that contain embedded particles. The stretching was performed under controlled conditions at temperatures above the T_g of the films and particles. The elongated films were dissolved in water, and the microspheroids were subsequently removed and purified from the poly (vinyl alcohol). The aspect ratio (AR) of the particles, which denotes the ratio of the lengths of the longer to shorter particle axes, was determined by the film elongation. The AR values were in the range of 2.9‐7.7. Spheroidal particles with various ARs were deposited onto silicon wafers from an ethanol (EtOH) suspension. The particle concentration and volume of the suspension were the same in each experiment. Evaporation of the EtOH yielded stripes of spherical particles packed into nematic‐type colloidal crystals and assembled into monolayers. The orientation of the stripes after ethanol evaporation was perpendicular to the triphasic (silicon‐ethanol‐air) interface along the silicon substrate. The adsorbed stripes on the wafers were characterized in terms of their interstripe distance (ID), stripe width, and crystal domain size. Nematic‐type spheroid arrangements in the stripes were the dominant structure, which enabled denser packing of the particles into colloidal crystals than that allowed by the smectic‐type arrangements. Furthermore, the number of spheroids adsorbed per surface unit of the silicon wafers was similar for all ARs, but the width and frequency of the spheroid stripes adsorbed on the wafers were different.     

A quantitative thermal analysis of cyclists’ thermo-active base layers

It is well known that clothes used in sporting activity are a barrier for heat exchange between the environment and athlete, which should help in thermoregulation improvement. However, it is difficult to evaluate which top is best for each athlete according to the characteristics of the sport. Researchers have tried to measure the athlete’s temperature distribution during exercise at the base layers of tops with different approaches. The aim of this case study was to investigate the use of thermography for thermo-active base layer evaluation. Six new base layers were measured on one cyclist volunteer during a progressive training on a cycloergometer. As a control condition, the skin temperature of the same volunteer was registered without any layer with the same training. A training protocol was selected approximate to cycling race, which started from the warm-up stage, next the progressive effort until the race finished and at the end “cool-down” stage was over. In order to show which layer provided the strongest and weakest barrier for heat exchange in comparison with environment, the temperature parameters were taken into consideration. The most important parameter in the studies was the temperature difference between the body and the layers, which was changing during the test time. The studies showed a correlation between the ergometer power parameter and the body temperature changes, which has a strong and significant value. Moreover, the mass of every layer was checked before and after the training to evaluate the mass of the sweat exuded during the test. From this data, the layer mass difference parameter was calculated and taken into consideration as a parameter, which may correspond with the mean heart rate value from each training. A high and positive correlation coefficient was obtained between the average heart rate and the mass difference for the base layers. Thermal analysis seems to have a new potential application in the objective assessment of sports clothing and may help in choosing the proper clothes, which could support heat transfer during exercising and protect the body from overheating.

     

Halogen bonding in 1,2‐dibromo‐4,5‐dimethoxybenzene and 1,2‐diiodo‐4,5‐dimethoxybenzene

An interesting case of `halogen‐bonding‐promoted' crystal structure architecture is presented. The two title compounds, C₈H₈Br₂O₂ and C₈H₈I₂O₂, have almost indistinguishable molecular structures but very different spatial organization, and this is mainly due to differences in the halogen‐bonding interactions in which the different species present, i.e. Br and I, take part. The dibromo structure exhibits a π‐bonded columnar array involving all four independent molecules in the asymmetric unit, with intercolumnar interactions governed by C—Br...Br—C links and with no C—Br...O/N interactions present. In the diiodo structure, instead, the C—I...O synthon prevails, defining linear chains, in turn interlinked by C—I...I—C interactions.     

ICP-MS multi-element analysis of wine samples - a comparative study of the methodologies used in two laboratories

A comparison of the performance of the methodologies used in two distinct laboratories (Lab A and Lab B) for multi-element analysis in different wines was carried out. ICP-MS apparatus (quadrupole mass analyzers) of different brands as well as different wine pre-treatments were used. At Lab A, a pre-treatment by UV-irradiation was performed. At Lab B, a micro-concentric nebulizer was used for direct analysis of the wine. Twenty-six elements (Li, V, Co, Ni, Cu, Zn, Ga, As, Rb, Sr, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Pb) were measured in common at the two labs in three different wine samples (red and white Bordeaux table wines and Port wine) and the results were compared. The two methodologies provided similar LODs and similar precisions, with RSDs of 0.5-5%, for most of the elements. The recovery percentages were 85-120% at Lab A for the three wines, and 78-119% at Lab B for the Bordeaux wines, validating the accuracy of the methods used. Comparable results were obtained at both labs for ten elements (Li, V, Co, Ni, Cu, Zn, Rb, Sr, Ba, and Pb) in the three selected wines; the differences were lower than 10% in most cases. For REEs, the differences observed were slightly higher, but still in the acceptable range due to the sub-ppb levels involved. The results obtained for As and Ga were not comparable, due to methodological influence. A comparison through linear least-squares adjustment indicated that the results obtained by the two labs were linearly correlated (correlation coefficient =0.997) but statistically different as the slope was slightly, but significantly different from one, for a confidence level of 95% (the intercept was statistically identical to zero in any case). In the future, strictly more identical results can be achieved by using a reference wine sample.     

Diastereoselective nucleophilic substitution reactions of oxasilacyclopentane acetals: application of the "inside attack" model for reactions of five-membered ring oxocarbenium ions

The additions of nucleophiles to oxocarbenium ions derived from oxasilacyclopentane acetates proceeded with high diastereoselectivity in most cases. Sterically demanding nucleophiles such as the silyl enol ether of diethyl ketone add to the face opposite the C-2 substituent. These reactions establish the syn stereochemistry about the newly formed carbon-carbon bond. Small nucleophiles such as allyltrimethylsilane do not show this same stereochemical preference: they add from the same face as the substituent in C-2-substituted oxocarbenium ions. The stereoselectivities exhibited by both small and large nucleophiles can be understood by application of the "inside attack" model for five-membered ring oxocarbenium ions developed previously for tetrahydrofuran-derived cations. This stereoelectronic model requires attack of the nucleophile from the face of the cation that provides the products in their lower energy staggered conformations. Small nucleophiles add to the "inside" of the lower energy ground-state conformer of the oxocarbenium ion. In contrast, sterically demanding nucleophiles add to the inside of the envelope conformer where approach is anti to the C-2 substituent of the oxocarbenium ion, regardless of the ground-state conformer population.     

Bestimmung der Aktivitätskoeffizienten im chromatographischen Modell „binärer Lösungen“

An explanation is given for the two possible ways of determination of the activity coefficients of solutes, when applying a new thermodynamic model of adsorption and partition chromatography, i. e. the binary solutions model.